> trailer guide pole lights

Lighted top for greater visibility. Combination amber and red lights provide improved visibility when trailering on the road. Light clearly marks or loading your boat. Light clearly marks where the trailer is behind the tow vehicle when backing down a ramp in the dark. Red light faces backward. Amber light faces forward. 2" PVC post is notched to prevent twisting. Includes all mounting hardware for frames up to 3" Wide x 4 1/4" Height. Does not replace mandated trailer lights. Sold in pairs, available in 40" or 60" heights.

Guide posts go inside pontoons to center boat on trailer. Metal are extends fully into PVC tube for strength. Height of 22". Made of 1.5" square 16 Ga. steel tubing covered by 2" PVC tube. Mount on top of trailer frame. Comes complete with hardware for trailer frames up to 3" wide by 4.5" high. Kit includes 2 complete guide posts and hardware.

NEW ITEM ! Proven reliable with 100% Satisfaction after 3 years on the market and "0" failure dure to product problems ! 1020 Kit : Complete over 80" wide DOT approved Trailer Lighting kit. Includes RED LED Stop Turn Tail Lights, RED Built in Side markers, Red Reflectors on Sides and Rear for DOT Approved Reflectors. Amber reflectors facing driver for assistance in Reverse. LED Super bright White Sealed License plate Light for DOT Lighting. 10 Ft. of wiring on Lights to reach previous lighting kit wires. 3 Year Warranty, save your receipt and we will replace any part that goes bad due to Failure. This should be the Last pair of Trailer lights you ever buy. **** LED Lighting requires a Good Clean Ground. if you are finding a Light or several doing mysterious Things like Partial Lighting, blinking at strange times, only working or not when head lights are on. It Is a Bad Ground or ground problem. These lights will last over 11 years if used 24 hours a day 7 days a week. *** Keep your Boat Trailer Lights High and Dry ! Mount as high as 6' off of the ground on the back of your boat trailer. The actually Diameter of the Standard Guide Pipe is 2 3/8" It includes 10 foot of wire for each light. They have Stop Turn and tail light function. Amber Reflector facing Driver to help with backing during Night Time launching. S/S Screws for removable mounting. All the connectors for wiring are included. These lights are rated at 100,000 hours of use. 11 Years. These lights mount on the 2" PVC Guides that measure 2 3/8 These are DOT Compliant Lights

Industrial strength and durablility, Easy-to-install, 6-pole plug, Six-pole, Round Trailer Socket. Six-pole, round plug for truck end. Heavy-duty die cast trailer receiver socket with wire guard is easy to install. Imported. Shop Supplies, Vehicle Accessories, Vehicle Lights

NEW ITEM ! 1 Year Warranty Keep your Boat Trailer Lights High and Dry ! Mount as high as 6' off of the ground on the back of your boat trailer. The actually Diameter of the Standard Guide Pipe is 2 3/8" It includes 10 foot of wire for each light. They have Stop Turn and tail light function. Amber Reflector facing Driver to help with backing during Night Time launching. S/S Screws for removable mounting. All the connectors for wiring are included. These lights are rated at 100,000 hours of use. 11 Years. These lights mount on the 2" PVC Guides that measure 2 3/8

Have weaving problems? Wire guides are very helpful in teaching your dog to weave. By providing a visual "pathway" for your dog to weave, it doesn't take as long for your dog to learn the concept of weaving. Start by placing them at your dog's line of sight. Not too high, not too low. Soon you'll be able to inch the wires up or down (out of your dog's line of sight), and then eventually remove them entirely, bringing them back only when you need to reinforce the training again. Made of flexible pvc, these wires are a cinch to snap on and off. These are wires that will hold up, and do not sag, even when iced up. They fit all standard 3/4" weave sets. (1" outer diameter), inluding any and all Affordable Agility weave pole sets. These are the best guide wires you'll ever need. NOTE: If you have a 6pole weave set, you will need 4 wires (part # WW4-0). If you have a 12pole weave set, you will need 10 wires (part # WW10-0)

Finesse your trailer in a tight space! Get this 600 - lb. Trailer Dolly. Made of heavy-duty steel, strong enough to easily move a load of up to 600 lbs. over most any terrain. Just what you need for easy manual maneuverability of utility, boat, cargo, jet-ski and other small trailers. Sturdy, easy-rolling 10 x 3" tires. Measures 27 x 13 x 47"h. Weighs 30 lbs. Get a move on without lots of hassle and strain! Order Now! 600-lb. Trailer Dolly

Mount tail lights high and dry. Includes (2) 2-3/4" X 6" galvanized brackets plus hardware for mounting to pre-punched boat guide-on upright posts. (Does not include lights or wiring)

The Yakima Safety Pole attaches to either the trailer load bars, or the trailer frame. The Yakima Safety Pole works with both the Yakima RACKandROLL 66 and 78 Trailer.

Makes boat loading easier. Galvanized posts are pre-assembled with 9" roller and end caps. Height 21" with adjustment out to 13" each side. Can be mounted on top of frame for extra height. Complete for trailer frames up to 3" wide by 4-1/4" high. Comes with both sides of the trailer.

Boat trailer guide protectors simply slide over existing trailer guide posts to help protect from scratches and impact. These protectors not only protect your boat but enhance the looks too. Made of closed cell polyurethane foam with nylon cloth covers. Sold in Pairs I.D. 2.5" Length 60"

Boat trailer guide protectors simply slide over existing trailer guide posts to help protect from scratches and impact. These protectors not only protect your boat but enhance the looks too. Made of closed cell polyurethane foam with nylon cloth covers. Sold in Pairs I.D. 2.5" Length 36"

Boat trailer guide protectors simply slide over existing trailer guide posts to help protect from scratches and impact. These protectors not only protect your boat but enhance the looks too. Made of closed cell polyurethane foam with nylon cloth covers. Sold in Pairs I.D. 2.5" Length 36"

Boat trailer guide protectors simply slide over existing trailer guide posts to help protect from scratches and impact. These protectors not only protect your boat but enhance the looks too. Made of closed cell polyurethane foam with nylon cloth covers. Sold in Pairs I.D. 2.5" Length 60"

Traditional incandescent lighting, 7-way plug style, Includes four 20'' rubber straps, 60'' PVC Wide-load Incandescent Trailer Light Bar, Help prevent collisions by adding visibility to your trailer. Traditional incandescent lighting keeps your trailer visible to help prevent collisions. Lightweight, yet rugged, PVC light bar is easy to attach to your trailer. Features sealed stop/tail/turn lights, rectangular reflectors, and endlights to provide greater visibility. Secure to your trailer or load by using the four attached U-bolts or four 20'' rubber straps (included). 60'' wide, 7-way plug style. Unit weighs 13 lbs. Imported.NOTE: Flush seven-way power plugs require corresponding power cable sold separately. Shop Supplies, Vehicle Accessories, Vehicle Lights

Makes it easy to see the end of the trailer while on the road or when loading or unloading. Galvanized posts extend more than half-way into each non marring heavy duty 2" PVC tube for extra stability. Can be mounted on top of frame for extra height. Complete to fit frame up to 3" wide x 4-1/4" high Comes with both sides of the trailer

Waterproof LED Trailer Light KitsUniversal stud-mount stop/turn/tail lights. All-weather molded plastic housing and durable lens protect against corrosion. 6 functions include stop, turn, tail, rear reflex, side marker, and side reflex, plus the drivers side light has a license plate illuminator. Features screw-on replaceable lens. Mounts on 2" centers. Includes two taillights, license plate bracket, 25 trailer harness, and hardware.

Move your sled with protection and turning ease! Trailer Turn - out Kit, BIG BUCKS OFF! These guide you in steering your snowmobiles off an enclosed or open trailer. They protect the trailer bed while doing it, too. 8 interlocking pieces allow for a turning radius of up to about 40". The outside lip guides the outer part of the snowmobile ski. The high-density polyethylene sections screw down to the trailer bed (mounting screws not included). Do it smoother and easier. Get this value Kit now! Trailer Turn-out Kit

The Wesbar® submersible LED combo trailer light kit comes complete with 2 tail lights, a 25' trailer wiring harness cable with molded 4-way flat-prong plug, a 4' car harness cable with molded 4-way flat-prong plug, and a license plate bracket.

DESCRIPTION Kit SUBMERSIBLE TRAILER LIGHT KIT An under 80 submersible kit for small trailers. Kit provides all legal lighting and reflectors for trailers under 80 wide. Includes one each of the 441/441L tail light, two 108A side marker lights, 20 trailer harness, 48 trunk connector, license bracket, mounting hardware, and installation instructions..

Trailer Connector FLAT 4 POLE,3 MALE and 1 FEMALE Specs: Trailer End Flat Four Pole, 3 Male And 1 Female Four 12" Color-coded Wires Origin: U.S. Sourced Part Number: 425090

This light kit is ideal for use with any RV, trailer, or car. Corrosion resistant housing mounts effortlessly on nearly any vehicle. Lights are excellent for towing use up to 80 inches wide. Kit operates on 12V and includes a 4 ft. color-coded trunk harness cable and 23 ft. Y-style harness cable.Features include:Great for motorcycle, snowmobile and utility trailers less than 80 inches wideAdd or upgrade the lights on your boat, snowmobile, camper or utility trailer4 ft. color-coded trunk harness23 ft. split Y-style harnessCorrosion resistant housingSuper Bright LED: 35pc and 40pcDimensions: 4.5 x 4.5 x 2.625 inchesLicense plate light and bracketIncludes retail packaging

Now this is a bright idea! Need more light when hooking up the trailer or loading the truck? The Light Buster Trailer Hitch is there for you. This powerful 55W halogen bulb has a 7-way round trailer light receptacle... no wiring or drilling! Dual function lets you use it as a utility light for setting up camp, trailering the boat or whatever, or set it to back-up function and you'll have more than enough light to avoid backing over your kids' toys as you pull out of the driveway. Durable plastic construction is approx. 6" long and 7 ozs. Easy, affordable, functional... shed a little light on the subject. Light Buster Trailer Hitch Light

Ribbed trailer guides and traction pieces provide easy snowmobile loading without trailer abuse. These low profile semi-flexible polyethylene guides are 8-inches wide and 3/8-inches thick. Great for dual carbide skis. Set includes 4 pieces @ 5-feet long. Each guide has pre-drilled recessed screw holes. Set includes mounting screws. Buy one set per snowmobile for a standard 10 foot trailer. Buy two sets (one carton) for a two-place trailer. Two units per carton. One Set.