> thermal imaging

With over 50,000 units fielded, the FLIR PathFindIR w/ LE Aftermarket Kit (NTSC) is the most reliable and affordable Thermal Imaging Camera available today. This compact Thermal Imager that significantly reduces the hazards of nighttime driving. Automotive Night Vision Systems enable drivers to detect and monitor potential hazards on or near the road, allowing more time to react to any potential danger. This Thermal Imager helps the user to recognize pedestrians, animals or objects in total darkness, smoke, rain, snow. The FLIR PathFindIR w/ LE Aftermarket Kit (NTSC) module can be integrated into military vehicle designs or adapted for aftermarket commercial vehicle applications. Detector type Focal Plane Array (FPA), uncooled microbolometer 324 x 256 pixels Spectral range 8 to 14µm Field of view 36° (H) x 27° (V) with 19 mm lens Spatial resolution (IFOV) 2 mrad Thermal sensitivity 100 mK at +25°C Image frequency* 8.3 Hz PAL or 7.5 Hz NTSC * Focus Automatic (25 m to infinity) Image processing Digital Detail Enhancement (DDE) Time to image < 2 seconds Automatic Heater When window temperature is below +4°C Video output RS170 EIA/NTSC or CCIR/PAL composite video, 75 Connector types BNC, with optional pigtail cable Requirements 6 - 16 V DC Consumption 2 W quiescent, 6 W max (with window heater on) Operating temperature range -40°C to +80°C Storage temperature range -57°C to +105°C (Extended storage time above +40°C is not recommended due to reduction in service life) Humidity 6,500 hours at 81%rh at +25°C and salt spray per IEC 60068-2-11Ka Sand/dust Mil-Std810 Icing Heater will defrost 2 mm of ice within 15 minutes at -30°C and wind speed of 100 km/h Encapsulation Hermetically sealed enclosure Shock 5 30g shocks in 2 directions on 3 axes (30 total) 11 mSec duration per IEC 60068-2-27Ea Vibration IEC 60068-2-64 Camera Weight 360 grams Camera Size 57.4 mm x 56.1 mm x 71.4 mm excluding connector which protrudes an additional 28.7 mm