> shower support

This 36" long shower arm allows you to raise your showerhead six inches, giving you more room underneath. Fits all standard showerheads. Fits Standard 1/2" showerheads. Extends 26" from shower wall. Raises Showerhead 6". Includes 5/8" x 30" long fit-all ceiling support with support escutcheon. Note: This shower arm must have 13" additional ceiling clearance above the current 90 degree elbow inside the wall. Measure from where the current shower arm exits the wall to the ceiling. 27" Horizontal x 12-1/2" Vertical Upward 6-1/2" return down. Showerhead and escutcheon sold separately. Available in finish options listed below. Ships in 1 - 2 business days.

This 36" long shower arm allows you to raise your showerhead six inches, giving you more room underneath. Fits all standard showerheads. Fits Standard 1/2" showerheads. Extends 26" from shower wall. Raises Showerhead 6". Includes 5/8" x 30" long fit-all ceiling support with support escutcheon. Note: This shower arm must have 13" additional ceiling clearance above the current 90 degree elbow inside the wall. Measure from where the current shower arm exits the wall to the ceiling. 27" Horizontal x 12-1/2" Vertical Upward 6-1/2" return down. Showerhead and escutcheon sold separately. Available in finish options listed below. Ships in 1 - 2 business days.

This shower enclosure support attaches to 1" shower rods. Available in several finish options. Shower rod support, attaches to 1" shower rings. Available in a variety of lengths. Available with 1" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This shower enclosure support attaches to 1" shower rods. Available in several finish options. Shower rod support, attaches to 1" shower rings. Available in a variety of lengths. Available with 1" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This 36" long shower arm allows you to raise your showerhead six inches, giving you more room underneath. Fits all standard showerheads. Fits Standard 1/2" showerheads. Extends 26" from shower wall. Raises Showerhead 6". Includes 5/8" x 30" long fit-all ceiling support with support escutcheon. Note: This shower arm must have 13" additional ceiling clearance above the current 90 degree elbow inside the wall. Measure from where the current shower arm exits the wall to the ceiling. 27" Horizontal x 12-1/2" Vertical Upward 6-1/2" return down. Showerhead and escutcheon sold separately. Available in finish options listed below. Ships in 1 - 2 business days.

Shower Enclosure Only45in L x 25in W36in Ceiling Support that can be cut to fit12in Wall Brace and can be cut to fitBoth ceiling and wall supports must be used to prevent swinging

This corner shower curtain rod is adjustable by cutting either or both lengths. One 36" ceiling support is furnished with this rod. Available in chrome, brushed nickel and polished brass finishes. Shower rod measures 48" x 60" x 1" OD Brass tubing. Rods can be shortened by cutting either or both ends. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Available in chrome, brushed nickel and polished brass. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. For sloped ceilings, see our swivel supports. See related items under each rod for curtains and hooks. Ship in 1 - 2 days.

This corner shower curtain rod is adjustable by cutting either or both lengths. One 36" ceiling support is furnished with this rod. Available in chrome, brushed nickel and polished brass finishes. Shower rod measures 48" x 60" x 1" OD Brass tubing. Rods can be shortened by cutting either or both ends. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Available in chrome, brushed nickel and polished brass. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. For sloped ceilings, see our swivel supports. See related items under each rod for curtains and hooks. Ship in 1 - 2 days.

This corner shower curtain rod is adjustable by cutting either or both lengths. One 36" ceiling support is furnished with this rod. Available in chrome, brushed nickel and polished brass finishes. Shower rod measures 48" x 60" x 1" OD Brass tubing. Rods can be shortened by cutting either or both ends. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Available in chrome, brushed nickel and polished brass. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. For sloped ceilings, see our swivel supports. See related items under each rod for curtains and hooks. Ship in 1 - 2 days.

This corner shower curtain rod is adjustable by cutting either or both lengths. One 36" ceiling support is furnished with this rod. Available in chrome, brushed nickel and polished brass finishes. Shower rod measures 48" x 60" x 1" OD Brass tubing. Rods can be shortened by cutting either or both ends. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Available in chrome, brushed nickel and polished brass. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. For sloped ceilings, see our swivel supports. See related items under each rod for curtains and hooks. Ship in 1 - 2 days.

This sturdy corner shower curtain rod is great for situations when the ordinary shower curtain rod is too short. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 48" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days. Please call our office for larger custom L rods.

This sturdy corner shower curtain rod is great for situations when the ordinary shower curtain rod is too short. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 48" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days. Please call our office for larger custom L rods.

This sturdy corner shower curtain rod is great for situations when the ordinary shower curtain rod is too short. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 48" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days. Please call our office for larger custom L rods.

This sturdy corner shower curtain rod is great for situations when the ordinary shower curtain rod is too short. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 48" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days. Please call our office for larger custom L rods.

This shower enclosure support attaches to 1" shower rods. Available in several finish options. Shower rod support, attaches to 1" shower rings. Available in a variety of lengths. Available with 1" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This shower enclosure support attaches to 1" shower rods. Available in several finish options. Shower rod support, attaches to 1" shower rings. Available in a variety of lengths. Available with 1" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This shower enclosure support attaches to 1" shower rods. Available in several finish options. Shower rod support, attaches to 1" shower rings. Available in a variety of lengths. Available with 1" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This shower enclosure support attaches to 1/2" shower rods. Available in several finish options. Shower rod support, attaches to 1/2" shower rings. Available in a variety of lengths. Available with 1/2" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 days

This shower enclosure support attaches to 3/4" shower rings. Available in several finish options. Shower rod support, attaches to 3/4" shower rings. Available in a variety of lengths. Available with 3/4" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 business days.

This shower enclosure support attaches to 3/4" shower rings. Available in several finish options. Shower rod support, attaches to 3/4" shower rings. Available in a variety of lengths. Available with 3/4" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 business days.

This shower enclosure support attaches to 3/4" shower rings. Available in several finish options. Shower rod support, attaches to 3/4" shower rings. Available in a variety of lengths. Available with 3/4" OD loop. 5/8" rod and flange with mounting screws. Rod can be extended with coupling and extra rod. Available in several finish options listed below. Ships in 1- 2 business days.

Adjustable Extra High Shower Chair With Back The Adjustable Extra High Shower Chair With Back is a strong, supportive shower seat designed for taller people. This tall shower chair is made with only the strongest of materials for added stability and years of shower chair use. The Adjustable Extra High Shower Chair with Back is shipped ready to assemble; a Phillips head screw driver is all that is needed. The tuff coat aluminum tubing allows for secure gripping of the shower seat. The curved back tubes of this shower seat add more room to the seating area. Adjustable Extra High Shower Chair With Back Features: Blow molded shower seat and back with two-hole handle for additional support to the wrist Shower seat back designed for elbow clearance Adjustable lower brace clamps Adjustable in 1" increments 1/4" Aircraft type rivets (will not loosen) TUFF COAT 1" aluminum tubing Adjustable Extra High Shower Chair With Back Specifications: Color: White Shower Seat height: 19" - 23.5" Shower Seat width: 20" Seat depth: 11" Leg width: 18" fully extended Leg depth: 18 1/2" fully extended Weight: 5 lbs. 300 lb. weight capacity Assembly Instructions Mounting of the Backrest: Insert the end of the backrest support tube with the small holes into the bottom of the backrest. Slide the tubes all the way in till the bottom small hole in the support tube is visible through the backrest hole. Insert the two sheet metal screws (Do not over tighten). Position the bath seat. Remove the mounting screws from the frame and seat. Line up the backrest support tube from front to rear aligning the holes with the mounting screws. After sliding the screws through the backrest support tube and frame attach the seat (Do not over tighten). Make sure the tubes are touching the seat. Mounting the leg extensions: This can be done before or after the mounting of the back. Position the bath seat. Depress the adjustment button and slide the extension to the leg at desired height. Repeat on the rest of the legs. Provided are leveling washers to be used in the chance the unit is not level. If you need to use the leveling washers be sure to insert one in the shorter leg and then try it to see if it needs more. If more is needed, apply one to the opposite leg. If more is needed repeat these steps. There should not be more than two washers in any tip. Included: (1) Backrest (2) Screws for mounting the backrest (2) Backrest Support Tubes (1) Bath Seat (This is mostly assembled when shipped) (4) Leg Extensions Returns: Due to hygiene purposes, the Adjustable Extra High Shower Chair With Back is non-returnable. Please refer to ActiveForevers return policy for more detailed information.. Related Searches: Shower chairs, shower seat, shower seats, bath seat, bath seats, bath bench, bath benches

This sturdy corner shower curtain rod is ideal for situations that require a longer corner shower rod. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 36" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days.

This sturdy corner shower curtain rod is ideal for situations that require a longer corner shower rod. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 36" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days.

This sturdy corner shower curtain rod is ideal for situations that require a longer corner shower rod. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 36" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days.

This sturdy corner shower curtain rod is ideal for situations that require a longer corner shower rod. Comes with one ceiling support. Available in finishes listed below. 1" OD brass tubing. Rod is 36" x 72". Rods adjustable by cutting ends. Custom cut this rod at installation time. Great size fits whirlpool tubs with showers and other installations where the regular size shower rod is too short. Packed in individual carton with two jumbo style rectangular flanges. Ships in two pieces. Includes one 36" ceiling support. Supports for sloped ceilings available. See below. For extra support, order a second ceiling support. (Sold separately, at bottom of this page) See related items below for curtains, hooks and supports. Available in finishes listed below. Ship within 2 business days.

54" x 24" Polished Chrome Rectangular Shower Curtain Rod. Perfect for use with your free standing tub, clawfoot tub, or as a shower enclosure. Includes ceiling support, wall support, and 2 wall mounts so it's ready to install. Matching bath accessories and faucets available in our YouRemodel storefront. Please contact us if you have any questions.

Adjustable Extra High Shower Chair With Back The Adjustable Extra High Shower Chair With Back is a strong, supportive shower seat designed for taller people. This tall shower chair is made with only the strongest of materials for added stability and years of shower chair use. The Adjustable Extra High Shower Chair with Back is shipped ready to assemble; a Phillips head screw driver is all that is needed. The tuff coat aluminum tubing allows for secure gripping of the shower seat. The curved back tubes of this shower seat add more room to the seating area. Adjustable Extra High Shower Chair With Back Features: Blow molded shower seat and back with two-hole handle for additional support to the wrist Shower seat back designed for elbow clearance Adjustable lower brace clamps Adjustable in 1" increments 1/4" Aircraft type rivets (will not loosen) TUFF COAT 1" aluminum tubing Adjustable Extra High Shower Chair With Back Specifications: Color: White Shower Seat height: 19" - 23.5" Shower Seat width: 20" Seat depth: 11" Leg width: 18" fully extended Leg depth: 18 1/2" fully extended Weight: 5 lbs. 300 lb. weight capacity Assembly Instructions Mounting of the Backrest: Insert the end of the backrest support tube with the small holes into the bottom of the backrest. Slide the tubes all the way in till the bottom small hole in the support tube is visible through the backrest hole. Insert the two sheet metal screws (Do not over tighten). Position the bath seat. Remove the mounting screws from the frame and seat. Line up the backrest support tube from front to rear aligning the holes with the mounting screws. After sliding the screws through the backrest support tube and frame attach the seat (Do not over tighten). Make sure the tubes are touching the seat. Mounting the leg extensions: This can be done before or after the mounting of the back. Position the bath seat. Depress the adjustment button and slide the extension to the leg at desired height. Repeat o

This brass rectangular shower curtain rod is available several finishes. This includes both a ceiling and a wall support and necessary mounting hardware. Rectangular rod is made of 3/4" OD brass tubing. Furnished with 5/8" OD x 30" ceiling support and 5/8" OD x 12" wall support. Includes wall and ceiling mount hardware. Pre-drilled for 5/8" OD shower riser pipe. 28" W x 54" L. Ships in 1-2 business days.

This brass rectangular shower curtain rod is available several finishes. This includes both a ceiling and a wall support and necessary mounting hardware. Rectangular rod is made of 3/4" OD brass tubing. Furnished with 5/8" OD x 30" ceiling support and 5/8" OD x 12" wall support. Includes wall and ceiling mount hardware. Pre-drilled for 5/8" OD shower riser pipe. 28" W x 54" L. Ships in 1-2 business days.

This brass rectangular shower curtain rod is available several finishes. This includes both a ceiling and a wall support and necessary mounting hardware. Rectangular rod is made of 3/4" OD brass tubing. Furnished with 5/8" OD x 30" ceiling support and 5/8" OD x 12" wall support. Includes wall and ceiling mount hardware. Pre-drilled for 5/8" OD shower riser pipe. 28" W x 54" L. Ships in 1-2 business days.

This brass rectangular shower curtain rod is available several finishes. This includes both a ceiling and a wall support and necessary mounting hardware. Rectangular rod is made of 3/4" OD brass tubing. Furnished with 5/8" OD x 30" ceiling support and 5/8" OD x 12" wall support. Includes wall and ceiling mount hardware. Pre-drilled for 5/8" OD shower riser pipe. 28" W x 54" L. Ships in 1-2 business days.

This is a quality shower kit that includes the curtain ring, faucet, riser pipe, showerhead, and mounting parts. Included s type deck couplers attach the faucet to the tub rim on 7" centers. Available in several finish and size options. Faucet is solid brass construction with 1/4 turn ceramic disc cartridges and has 3-3/8" centers. "Hot", "Cold" and "Shower" diverter handles are ceramic with black lettering. Included S type deck couplers attach faucet to rim on 7" centers. (Wall mount kit is shown in photo.) Shower enclosure is 3/4" OD brass tubing. 48", 54", or 60" L x 28" W enclosure includes one 36" ceiling support and one 10" wall support. Supports can be cut to length. Ring is 3/4" OD diameter. Two piece shower riser is 3/8" brass pipe size; 77" total height with 9-1/2 projection. Showerhead is heavy brass,

This is a quality shower kit that includes the curtain ring, faucet, riser pipe, showerhead, and mounting parts. Available in several finish and size options. Faucet is solid brass construction with 1/4 turn ceramic disc cartridges and has 3-3/8" centers. "Hot", "Cold" and "Shower" diverter handles are ceramic with black lettering. Shower enclosure is 3/4" OD brass tubing. 48", 54", or 60" L x 28" W enclosure includes one 36" ceiling support and one 10" wall support. Supports can be cut to length. Ring is 3/4" OD diameter. Two piece shower riser is 3/8" brass pipe size; 77" total height with 9-1/2 projection. Showerhead is heavy brass, 4 7/8" diameter. 1/2" IPS showerhead fitting. Riser pipe may be cut to desired length. Antique Brass now available. Available in sizes and finishes listed below. In stock. Ships

This is a quality shower kit that includes the curtain ring, faucet, riser pipe, showerhead, and mounting parts. Available in several finish and size options. Deluxe British telephone leg tub faucet with diverter. Adaptable to tubs with faucet holes from 3" to 13" on center. Unit is solid brass construction. Faucet has handles marked "Hot", "Cold", and "Shower/Bath" and 1/4 turn ceramic disc cartridges. Shower enclosure is 3/4" OD brass tubing. 48", 54", or 60" L x 28" W enclosure includes one 36" ceiling support and one 10" wall support. Supports may be cut to length. Two piece shower riser is 3/8" brass pipe size; 77" total height with 9-1/2 projection. Riser pipe may be cut to desired length. 1/2" IPS showerhead fitting. 6 1/4" diameter showerhead with porcelain ring. Polished Nickel and Antique Brass kits come with solid metal showerhead. Hand held shower with 5' hose, push

This is a quality shower kit that includes the curtain ring, faucet, riser pipe, showerhead, and mounting parts. Available in several finish and size options. Deluxe British telephone leg tub faucet with diverter. Adaptable to tubs with faucet holes from 3" to 13" on center. Unit is solid brass construction. Faucet has handles marked "Hot", "Cold", and "Shower/Bath" and 1/4 turn ceramic disc cartridges. Shower enclosure is 3/4" OD brass tubing. 48", 54", or 60" L x 28" W enclosure includes one 36" ceiling support and one 10" wall support. Supports may be cut to length. Two piece shower riser is 3/8" brass pipe size; 77" total height with 9-1/2 projection. Riser pipe may be cut to desired length. 1/2" IPS showerhead fitting. 6 1/4" diameter showerhead with porcelain ring. Polished Nickel and Antique Brass kits come with solid metal showerhead. Hand held shower with 5' hose, push

With a design reminiscent of old European hotels, this shower enclosure transforms your clawfoot tub into a luxurious shower setup. Designed for deck drilled tubs, this kit features a large 10" rainfall showerhead with tapered nozzles and a faucet with cross handles and lever diverter. The 1" OD heavy duty oval curtain frame comes complete with three supports for wall or ceiling, as well as an arching riser pipe with wall support. Available in several sizes and designer finishes. Solid brass construction. Deck mount faucet has 7" centers. Faucet has cross handles, a lever diverter, and porcelain buttons. Solid brass 10" shower head with tapered nozzles. Oval curtain ring is heavy duty 1" diameter with three 36" ceiling/wall supports. Heavy duty two piece riser pipe is 78" high with 18" arc. Riser pipe has 12" wall support. Riser pipe and all supports can be cut to desired length.

With a design reminiscent of old European hotels, this shower enclosure transforms your clawfoot tub into a luxurious shower setup. Designed for deck drilled tubs, this kit features a large 10" rainfall showerhead with tapered nozzles and a faucet with cross handles and lever diverter. The 1" OD heavy duty oval curtain frame comes complete with three supports for wall or ceiling, as well as an arching riser pipe with wall support. Available in several sizes and designer finishes. Solid brass construction. Deck mount faucet has 7" centers. Faucet has cross handles, a lever diverter, and porcelain buttons. Solid brass 10" shower head with tapered nozzles. Oval curtain ring is heavy duty 1" diameter with three 36" ceiling/wall supports. Heavy duty two piece riser pipe is 78" high with 18" arc. Riser pipe has 12" wall support. Riser pipe and all supports can be cut to desired length.