> rs 232 c printer

Versatile: Battery operated, light weight, with available ranges from 2-20 in-oz to 150-1500 ft-lb, and seven units of measure, in-oz, in-lb, ft-lb, Nm, dNm, mKg or cmKg. The MULTITORQTM system can be used with sockets, extensions, universal joints, ratcheting drivers or any of these combined. PC statistical analysis output: Down load histogram, minimum & maximum reading, mean, sigma N, sigma, CP, Cpk, % error, number of readings under & over tolerance. Serial Port Interface with computer or printer: True RS-232 communications port for downloading to computer or serial printer. Also configurable to Mitutoyo statistical printer protocol. Smart sensor: "Plug-and-Play" build-in EEPROM memory chip that stores sensor indetification & calibration factors. Factory calibrated, a sensor retains its accuracy with all Multitorqtm meters, just plug in the desired sensor. Periodic re-calibration is necessary. Data acquisition: Store and recall up to 3500 readings. An internal memory backup battery retains setup and last memory data for up to ten years. ROTARY SOCKET TRANSDUCERS: Rotary Socket Transducers can be mated to Multitorq offering dynamic torque verification. These sturdy transducers measure torque bi-directionally and are especially suited for displaying the output torque of stall/clutch- type power tool ( no impact or pulse type tools ). Four models available suited for RPM's of 1000 or less. Accuracy = +/- 1 % bi-directionally from 10-100 % of full scale. VISUAL & AUDIO CUES: Analog bar graph at top of display provides a live indication of applied torque. An OVER warning flag comes on to indicate maximum sensor range has been exceeded. Green MIN LED indicated lower tolerance has been achieved and a RED MAX LED indicates upper tolerance has been exceeded. Audio alarm produces a distinctive 2KHz tone. Audio output jack provided for optional head phoned in a noisy environment.

Versatile: Battery operated, light weight, with available ranges from 2-20 in-oz to 150-1500 ft-lb, and seven units of measure, in-oz, in-lb, ft-lb, Nm, dNm, mKg or cmKg. The MULTITORQTM system can be used with sockets, extensions, universal joints, ratcheting drivers or any of these combined. PC statistical analysis output: Down load histogram, minimum & maximum reading, mean, sigma N, sigma, CP, Cpk, % error, number of readings under & over tolerance. Serial Port Interface with computer or printer: True RS-232 communications port for downloading to computer or serial printer. Also configurable to Mitutoyo statistical printer protocol. Smart sensor: "Plug-and-Play" build-in EEPROM memory chip that stores sensor indetification & calibration factors. Factory calibrated, a sensor retains its accuracy with all Multitorqtm meters, just plug in the desired sensor. Periodic re-calibration is necessary. Data acquisition: Store and recall up to 3500 readings. An internal memory backup battery retains setup and last memory data for up to ten years. ROTARY SOCKET TRANSDUCERS: Rotary Socket Transducers can be mated to Multitorq offering dynamic torque verification. These sturdy transducers measure torque bi-directionally and are especially suited for displaying the output torque of stall/clutch- type power tool ( no impact or pulse type tools ). Four models available suited for RPM's of 1000 or less. Accuracy = +/- 1 % bi-directionally from 10-100 % of full scale. VISUAL & AUDIO CUES: Analog bar graph at top of display provides a live indication of applied torque. An OVER warning flag comes on to indicate maximum sensor range has been exceeded. Green MIN LED indicated lower tolerance has been achieved and a RED MAX LED indicates upper tolerance has been exceeded. Audio alarm produces a distinctive 2KHz tone. Audio output jack provided for optional head phoned in a noisy environment.

RS-232 COMPUTER CONTROL + HRD SOFTWARE for KENWOOD R-5000 Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge RS232 COMPUTER CONTROL INTERFACE / CABLE (IF-232)for KENWOOD R-5000 SHORTWAVE RECEIVER This auction is for a custom RS232 interface for the KENWOOD R-5000 shortwave receivers and the Ham Radio Deluxe software on a CD disc . The interfaces are custom made and replace the discontinued Kenwood IF-232 and power supply and cables which would cost over $100.Th

100% high quality! You can easily add RS232 serial to your notebook with this PCMCIA ExpressCard. Compliant with RS-232 serial interface. Data transfer rate of 921.6KB/s.

RS-232 COMPUTER CONTROL + S/W for KENWOOD TRANSCEIVERS Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Description : RS232 COMPUTER CONTROL INTERFACE / CABLE (IF-232+)for KENWOOD AMATEUR HF TRANSCEIVERS This auction is for a custom RS232 interface for the KENWOOD transceivers and the Ham Radio Deluxe software on a CD disc . The interfaces are custom made and replace the discontinued Kenwood IF-232 and power supply and cables which would cost over $100.The in

This tiny size modem allows extension of RS-232 serial interface over 4 wire (2 twisted pairs Cat3) copper lines, up to 10Km, operating as a self powered device without external power supply. An optional power adapter can be used also for broader coverage

This tiny size modem allows extension of RS-232 serial interface over 4 wire (2 twisted pairs Cat3) copper lines, up to 10Km, operating as a self powered device without external power supply. An optional power adapter can be used also for broader coverage

RS-232 COMPUTER CONTROL + HRD SOFTWARE for KENWOOD TS-440S Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge Click to Enlarge RS232 COMPUTER CONTROL INTERFACE / CABLE (IF-232)for KENWOOD TS-440S AMATEUR TRANSCEIVER This auction is for a custom RS232 interface for the KENWOOD TS-440S amateur radio transceivers and the Ham Radio Deluxe software on a CD disc . The interfaces are custom made and replace the discontinued Kenwood IF-232 and power supply and cables which would cost o

Cisco High Density RS-232 Splitter Cable, CAB-HD4-232MT Network Cable Type- Serial RS-232 cable Length- 10 ft Connector(s)- (1) DB-25 - male Connector(s) (Other Side)-(4) DB-25 - male Condition: New Warranty : 1 Year

Ericsson RS-232/ KRY-105155 data cable is the factory original AH600/ AH618/ AH620/ AH628/ AH630/ DH618/ KH618/ DH668/ KH668/ LX677/ DF688/ KF688/ LX700/ A1228c/ A1228d/ A1228LX/ LX280/ R280D/ R280LX/ R280di/ LX588/ AF738/ AF788/ CF 768/ CF788/ LX788/ KF788/ T18z/ T18d/ T18LX/ T19LX cellular phone compatible serial data cable. Ericsson RS-232/ KRY-105155 data cable allows you to connect your cell phone to your PC computer!No software is provided. OEM RS-232/ KRY-105155 serial data cable allows you to email, synchronize schedules and contacts, transfer files, and browse the web -- all instantly, wirelessly, and easily, between your AH600/ AH618/ AH620/ AH628/ AH630/ DH618/ KH618/ DH668/ KH668/ LX677/ DF688/ KF688/ LX700/ A1228c/ A1228d/ A1228LX/ LX280/ R280D/ R280LX/ R280di/ LX588/ AF738/ AF788/ CF 768/ CF788/ LX788/ KF788/ T18z/ T18d/ T18LX/ T19LX Cellular Phone and your PC computer.

8 Channel D1 Package Home l About Us l Privacy Policy l Payment Info l FAQs DVR Servers 4ch 8ch 16ch 24ch 32ch 48ch 64ch DVR Cards 4ch 8ch 16ch 24ch 32ch 48ch 64ch Complete Packages 4ch 8ch 16ch 24ch 32ch 48ch 64ch PTZ CCTV Cameras Infrared Bullet/Pinhole Spy Box Varifocal Dome PTZ IP Vandal-Proof CCTV Lenses CCTV Cables Power Boxes/Adapters Connectors Other Clearance RS232/RS485 Adapter Product Specifications: RS-232 to RS-485 converter, which can be used to convert any standard RS-232 port in

NEW M-5900RVE-RS232 HIGH SPEED RS232C

NEW M-5900RVE-RS232 HIGH SPEED RS232C WITH DISPENSER

Exchange data between your handheld and your computer. Connects via standard 9 pin RS-232 plug. Can be used as a substitute for Hot sync Cradle. Important: Please make sure to select your PDA Make and Model from the drop down box below.

UIC P790 PIN PAD 3 TRACK MSR RS232 0-SAM SOCKETS RS232 CABLE POWER ADAPTER PRIVACY SHIELD BACKLIGHT LCD ROHS