> rode classic ii

This suspension shock mount effectively isloates your NT1 from the mic stand for decreased physical noise.RODE Microphones History and Company PhilosophyRODE Microphones evolved from the Freedman Group of Companies, established in 1967 by Henry and Astrid Freedman, after immigrating to Australia from Sweden. Freedman Electronics was a pioneer in the Australian audio industry for the design, manufacture, installation and servicing of a diverse range of audio products. Loudspeakers, amplifiers, custom electronics and microphones were all a part of the company's expertise; all of which took place within the confines of the small but unique Australian market.Ongoing microphone research and development within Freedman Electronics, both in the laboratory and in the field, would later drive the ambition to design and produce superior microphone products. In 1990, the decision was made to produce and market the first RODE microphone. Before the explosion of the home recording market, there were very few established and respected manufacturers of professional recording quality (condenser) microphones. Those previous 'market-leaders' produced premium product that also carried a premium price.Why were they so expensive??? Well, the market at that time was small, and considerable investment had to be recouped from a limited customer base.RODE's early manufacturing coincided with the emergence of the much larger home recording and project studio markets. The company was aware; that by using the latest technologies, and the best design and engineering staff, production quantities could be produced which would achieve previously unheard of economies of scale.In 1998, having established itself as a leading force in this emerging market, RODE Microphones moved into a new purpose-built 20,000 sq ft factory and offices near the home of Sydney 2000 Olympics. The premises allowed for the necessary increases in electronic produ

A complete windshield and shock mounting accessory, the Rode Blimp Windshield Suspension System Pop Filter is designed to accommodate the Rode NTG1, NTG2 and NTG3 shotgun microphones in addition to the NT4 stereo microphone and most third party shotgun microphones up to 12 3/4 inches (325 mm) in length. Rode Blimp Windshield Suspension System Pop Filter Features Greatly reduces handling and wind noise Accommodates most shotgun microphones up to 12 3/4 inches (325 mm) in length Adjustable dual hoop suspension system Dead Wombat windshield, brush, and tail cable included The Blimp’s main housing is based on a 10 frequency geodesic dome, with a triangular cross-section that allows the part to be injection-molded in one piece. This geometry creates a high open-area ratio that greatly improves the acoustic transparency over existing solutions, yet an unparalleled level of robustness and physical protection for the microphone. The end-domes can be easily removed by twisting off, allowing easy access to the microphone. An oversize thread allows easy and intuitive re-attachment of the domes, avoiding clip systems that are difficult to use and vulnerable to breaking. A high quality Dead Wombat synthetic fur cover and brush is supplied for additional wind protection in extreme environments.

The Rode PG1 Pistol Grip For VideoMic is a convenient and ergonomic way to operate your Rode VideoMic or Stereo VideoMic independently of your video camera. A built-in cold shoe mount makes a secure connection between the microphone and the grip. For even more versatility, the PG1 features a 3/8-inch thread on the base that allows connection to a boompole or microphone stand, while the spine features handy cable management.

Designed to reduce handling noise when recording with shotgun microphones, the RØDE PG2 pistol grip shock mount will meet and exceed your expectations. It supports microphones with a diameter of 19-20mm or 21-22.5mm using the supplied interchangeable mounts, and a handy release lever on the mount allows for quick and easy adjustment of the microphone angle.Cable management is an integral design feature of the PG2 pistol grip, with the cable running through the handle assembly to minimise any handling noise or clutter. Additional cable security is provided on either side of the rubber shock mount. The PG2 can be operated by hand or attached to a boompole via the 3/8 inch thread attachment at the base.

Rode WS6 Deluxe Shotgun Microphone Windscreen; Record quality audio in even the windiest of conditions! Rode's WS6 Deluxe Windscreen/Windsh ield is perfect for reducing wind noise when recording outdoors in harsh environmental conditions. Places where wind would become a big issue have become an easier place to record audio for your sound library or short film dialog. The WS6 is designed to use with any shotgun microphone with a maximum slot length of 6 1/4 inches (160.5 mm) and a diameter of 0.8-0.9 inches (21-22.5 mm). Perfect size for Rode's NTG1 and NTG2 shotgun microphones. Shown with shockmount, mic, cable and pistol grip (sold seperately)

Designed for the professional, the Rode Boompole is a high grade professional boom pole for location recording. The boom pole allows you to mount your microphone securely and swivel it in a range of directions that will allow you to easily change positions and follow your sound source. Machine from high grade aluminium. Rode Boompole Features Lightweight aluminium construction New ultra smooth extension and retraction system Easy to use locking mechanism Precision balanced Extends from 33 inches to 10 feet Compatible with NTG1, NTG2, NTG3, NT4, NT5, NT55 and M3 microphones

A lightweight, high grade professional boom pole, the Mini Boompole allows you to mount your microphone securely. Plus you can swivel it in a range of directions that will allow you to easily change positions and follow your sound source. The Mini Boompole extends from 0.84m (33 inches) to 2.05m (81 inches). Rode Mini Boompole Features lightweight aluminium construction new ultra smooth extension and retraction system easy to use locking mechanism precision balanced Compatible microphones : NTG1, NTG2, NTG3, NT4, NT5, NT55, M3

The RODE D-PowerPlug is effectively a Turbo Charger for Dynamic microphones! The D-PowerPlug features an instrumentation grade pre-amplifier circuit and will turn any standard dynamic microphone into a high level electronically balanced output device. Using conventional microphones with long multi-core cables results in a dramatic loss of signal strength, and of course sound quality due to cable resistance and capacitance. Powered by standard P48 V, D-PowerPlug can drive cables in excess of 100 m with negligible loss of signal quality or power. Compatible with standard XLR connectors. RODE D-PowerPlug Features Instrumentation grade pre- amplifier. Balanced input and balanced output. Can be used with long cable runs with minimum losses. P48V phantom powered.

The PG1 Cold Shoe Pistol Grip is a convenient and ergonomic way to operate your RØDE VideoMic or Stereo VideoMic independently of your video camera. A convenient 3/8" thread on the base allows connection to a boompole or microphone stand, while the spine features handy cable management. Compatible microphones: VideoMic, Stereo VideoMic

Heavy-duty Carrying Bag for Rode Boom-Pole, Mic, and Shockmount with Zipper Closure and Carrying Strap

Windshield for RODE NTG Shotgun Microphones as well as Many Third-party Shotgun Microphones up to 12" in Length

Large-diaphragm Cardioid Condenser Microphone with Shock Mount, Pop Shield, XLR Cable, Dust Cover, and Instructional DVD