> raymarine 7 pin nmea plug

pc/nmea/seatalk interface boxconverts signals between seatalk nmea 0183 and rs232 formats.converts signals between seatalk nmea 0183 and rs232 formats. enables raytech navigation software to converse in seatalk with compatible devices. can be used to host pcs running nmea based navigation software on a seatalk network. also supports auxilproduct : raymarine e85001 interface box manufacturer : raymarine parts manufacturer part no : e85001 upc : 023193850016

PC/NMEA/SeaTalk Interface BoxConverts signals between SeaTalk, NMEA 0183, and RS232 formats.Converts signals between SeaTalk, NMEA 0183, and RS232 formats. Enables RayTech navigation software to converse in SeaTalk with compatible devices. Can be used to host PCs running NMEA based navigation software on a SeaTalk network. Also supports auxil MP Master List

PC/NMEA/SeaTalk Interface BoxConverts signals between SeaTalk, NMEA 0183, and RS232 formats.Converts signals between SeaTalk, NMEA 0183, and RS232 formats. Enables RayTech navigation software to converse in SeaTalk with compatible devices. Can be used to host PCs running NMEA based navigation software on a SeaTalk network. Also supports auxil

Power/NMEA CablePower/NMEA Cable, 7 pin MP Master List

Power/NMEA CablePower/NMEA Cable, 7 pin

Raymarine PCNMEASeaTalk Interface BoxPCNMEASeaTalk Interface BoxConverts signals between SeaTalk, NMEA 0183, and RS232 formats.Converts signals between SeaTalk, NMEA 0183, and RS232 formats. Enables RayTech navigation software to converse in SeaT...

Power and NMEA CableSupplies power and NMEA data input to Pathfinder series radar, chart, sonar, and multifunction displays.

Power and NMEA CableSupplies power and NMEA data input to Pathfinder series radar, chart, sonar, and multifunction displays. MP Master List

Raymarine Power and NMEA CablePower and NMEA CableSupplies power and NMEA data input to Pathfinder series radar, chart, sonar, and multifunction displays....

Converts signals between SeaTalk, NMEA 0183, and RS232 formats. Enables RayTech navigation software to converse in SeaTalk with compatible devices. Can be used to host PCs running NMEA based navigation software on a SeaTalk network. Also supports auxil

AIS250Automatic Identification System (AIS) Receiver with VHF splitter and NMEA multiplexerThe Raymarine AIS250 Receiver module is a listen only AIS receiver that easily integrates with an existing VHF antenna using a built in VHF splitter. The AIS250 then interfaces to Raymarine multifunction displays, allowing AIS targets to be graphically overlaid in both the chartplotter and radar modes. Operating in the VHF maritime band, the AIS system enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessels name, course, speed, and current navigation status.AIS250 Features: Monitoring of class A and B AIS broadcasts Overlay AIS targets on Raymarine multifunction displays in both chartplotter and radar modes AIS target tracking enhances your situational awareness by monitoring a targets name, course, speed, and navigation status Reconcile AIS targets with radar targets for added safety Built-in VHF/FM antenna splitter. No additional antenna required Two NMEA 0183 input and two NMEA 0183 output ports with a built-in multiplexer Support for NMEA 0183 at both 4800 and 38,400 baud AIS250 System RequirementsVHF Antenna Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibilityRaym arine Multifunction Displays RequirementsC- Series software version 3.18 or higher E-Series software version 3.22 or higher

AIS250Automatic Identification System (AIS) Receiver with VHF splitter and NMEA multiplexerThe Raymarine AIS250 Receiver module is a listen only AIS receiver that easily integrates with an existing VHF antenna using a built in VHF splitter. The AIS250 then interfaces to Raymarine multifunction displays, allowing AIS targets to be graphically overlaid in both the chartplotter and radar modes. Operating in the VHF maritime band, the AIS system enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessels name, course, speed, and current navigation status.AIS250 Features: Monitoring of class A and B AIS broadcasts Overlay AIS targets on Raymarine multifunction displays in both chartplotter and radar modes AIS target tracking enhances your situational awareness by monitoring a targets name, course, speed, and navigation status Reconcile AIS targets with radar targets for added safety Built-in VHF/FM antenna splitter. No additional antenna required Two NMEA 0183 input and two NMEA 0183 output ports with a built-in multiplexer Support for NMEA 0183 at both 4800 and 38,400 baud AIS250 System RequirementsVHF Antenna Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibilityRaym arine Multifunction Displays RequirementsC- Series software version 3.18 or higher E-Series software version 3.22 or higher MP Master List

ais250automatic identification system (ais) receiver with vhf splitter and nmea multiplexerthe raymarine ais250 receiver module is a listen only ais receiver that easily integrates with an existing vhf antenna using a built in vhf splitter. the ais250 then interfaces to raymarine multifunction displays allowing ais targets to be graphically overlaid in both the chartplotter and radar modes. operating in the vhf maritime band the ais system enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. commercial ships ocean going vessels and other boats equipped with ais transmitters broadcast ais messages that include the vessels name course speed and current navigation status.ais250 features: monitoring of class a and b ais broadcasts overlay ais targets on raymarine multifunction displays in both chartplotter and radar modes ais target tracking enhances your situational awareness by monitoring a targets name course speed and navigation status reconcile ais targets with radar targets for added safety built-in vhf/fm antenna splitter. no additional antenna required two nmea 0183 input and two nmea 0183 output ports with a built-in multiplexer support for nmea 0183 at both 4800 and 38400 baud ais250 system requirementsvhf antenna chartplotter multifunction display or pc application with nmea 0183 input and ais compatibility raymarine multifunction displays requirementsc- series software version 3.18 or higher e-series software version 3.22 or higher product : raymarine ais250 receiver manufacturer : raymarine manufacturer part no : e03015 upc : 723193030158

ST70 SmartPilot X-10 Linear Drive System f/ SailboatsPerfect for small hydraulically steered fishing and cruising powerboats, the ST70 SmartPilot X-10 Hydraulic Autopilot system is the perfect all-in-one-box autopilot solution.The system features the ST70 color autopilot controller. The ST70 Autopilot Control brings the convenience and flexibility of sunlight viewable display technology to autopilots. Featuring a high resolution, 3.5" TFT LCD display with 320 x 240 pixels, the ST70 Autopilot Controller's intuitive menu and icon driven interface and simple pushbutton controls make operation simple and straightforward. In addition to its high-visibility numerical readouts, the ST70 Autopilot Controller also takes advantage of its color capabilities with graphical autopilot displays and day/night color palettes.The ST70 Autopilot Control features our next generation SeaTalkng data bus for connection to SmartPilot X-Series autopilot core packs, ST70 instruments, and also NMEA 2000 compatible devices. Fully waterproof (CFR46) and engineered for the rigors of the marine environment, the ST70 Autopilot Controller can be easily surface mounted or flush mounted, matching the profile of ST60+ and ST70 instruments, as well as Raymarine Multifunction Displays and marine monitors. Engineered for boats with 12 or 24 Volt DC electrical systems, the SmartPilot X-10 corepack is the "brains" of your Raymarine modular pilot system. The SmartPilot X-10 corepack features an integrated rate-gyro processor as standard equipment. The rate gyro, combined with Raymarine's exclusive AST (Advanced Steering Technology) software algorithms ensure razor-sharp course keeping under any sea conditions. The SmartPilot X-10 also offers the convenience of rudder reference-less operation as well as data connections for SeaTalk, SeaTalkNG, NMEA 0183 and NMEA 2000 giving the SmartPilot X-10 unprecedented connectivity. Using SeaTalkNG networking, connect your SmartPilot X-10 to the ST70 Color Autopilot Controller and Raymarine instruments. Convenient Auto-tack and dodge features make this system the ideal crewmember for short-handed sailing.Finally, the muscle of this system is our Type 1 Linear Drive system. Designed for mechanically steered vessels up to 24,000 lbs. displacement (11,000 kg) the linear drive unit provides smooth, reliable course keeping under almost any conditions. ST70 Control Head Features3.5" Sunlight viewable displayIntuitive graphical displays for visualizing autopilot controlSimple setup and calibration with AutoLearnProgramm able AutoTack controlExtensive range of fishing patternsMultifunc tional dodge featureSeaTalkng next generation data bus interface for creating a ST70 instrument networkNMEA2000 compatibleCompati ble with Raymarine SeaTalk and SeaTalkng autopilots as well as Raymarine multifunction displaysX-10 Autopilot Core Pack FeaturesDesigned for all Raymarine Type 1 autopilot drives.Built-in rate gyro processorRaymarin e AST (Advanced Steering Technology) SoftwareAutoLearn calibration. Smart Rudder Sense technology eliminates the need for a rudder feedback sensor.NMEA 0183 and NMEA 2000 compatible. SeaTalk and SeaTalkng compatible. Automatic trolling of preset fishing patternsType 1 Linear Drive FeaturesSmooth, reliable integration with boat's mechanical steering system.Designed for vessels up to 24,000 lbs. displacement (11,000 kg.)

SmartPilot X-5 Sport PilotJust line up on the desired course, hit AUTO and let go of the wheel - it really is that simple! When you want to steer again, just hit STANDBY and steer as normal. With built in SeaTalk and NMEA interface, you can also select a waypoint on your GPS or chart plotter and the SPX-5 Sport will take you straight to it. SPX-5 Sport is an easy-to-use, easy-to-fit pilot for powerboats with a fixed or tilt, single station helm and comes with the latest ST6002 display. It is also comes equipped with the latest SeaTalkng networking and a standard rate-gyro processor ensuring razor sharp course keeping under any conditions.SPX-5 Sport is ideal for sports cruisers and rigid inflatable boats so whether it's high-speed pursuits or the most leisurely cruise, let the SportPilot take you there. It is also ideal for smaller sports fishing boats, now you can prepare the bait while the pilot steers the boat.SPX-5 Sport is designed for manual cable steered boats with laden displacements of up to 2000 kg (4400 lbs) and manual hydraulic and servo hydraulic steering up to 3500 kg (7700 Lbs).Easy-to-insta ll autopilot for power boats typically up to 30ft (9m)Built-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsSmart Rudder Sense technology eliminates the need for a rudder reference sensor SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controlsSuitable for fixed and tilt steering systemsAuto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.

SmartPilot X-5 Sport PilotJust line up on the desired course, hit AUTO and let go of the wheel - it really is that simple! When you want to steer again, just hit STANDBY and steer as normal. With built in SeaTalk and NMEA interface, you can also select a waypoint on your GPS or chart plotter and the SPX-5 Sport will take you straight to it. SPX-5 Sport is an easy-to-use, easy-to-fit pilot for powerboats with a fixed or tilt, single station helm and comes with the latest ST6002 display. It is also comes equipped with the latest SeaTalkng networking and a standard rate-gyro processor ensuring razor sharp course keeping under any conditions.SPX-5 Sport is ideal for sports cruisers and rigid inflatable boats so whether it's high-speed pursuits or the most leisurely cruise, let the SportPilot take you there. It is also ideal for smaller sports fishing boats, now you can prepare the bait while the pilot steers the boat.SPX-5 Sport is designed for manual cable steered boats with laden displacements of up to 2000 kg (4400 lbs) and manual hydraulic and servo hydraulic steering up to 3500 kg (7700 Lbs).Easy-to-insta ll autopilot for power boats typically up to 30ft (9m)Built-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsSmart Rudder Sense technology eliminates the need for a rudder reference sensor SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controlsSuitable for fixed and tilt steering systemsAuto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course. MP Master List

NMEA Input-Output Cable - 5-pin waterproof connector with bare wire ends, suitable for connecting to your NMEA devices.1.5 meters longWorks with C70, C80, C120, and A65.

C120W Multifunction Navigational DisplayPre- Loaded w/ U.S. Coastal CartographyThe all new C-Series Widescreen expands the power of multifunction navigation with larger, brilliant displays, increased performance, expanded networking and video integration. Build Your C-Series Widescreen NetworkC-Series Widescreen displays are easily expanded with SeaTalkhs digital network sensors for radar, fishfinder and satellite weather. Build a system with a single widescreen display or create a dual display C-Series Widescreen network. C-Series Widescreen displays also feature a SeaTalkng data bus port for connecting to SeaTalkng compatible instruments, autopilots, and NMEA2000 compatible devices. The NMEA2000 interface enables any C-Series Widescreen to display virtual instrument data from electronic engine instruments to trim tab systems. NMEA0183 inputs and outputs are available for AIS and third party devices. A first generation SeaTalk port is also available for networking with an external GPS sensor, LifeTag, and SeaTalk compatible instruments and autopilots.Go WiderTheatre like widescreen displayView more navigation data simultaneouslyMak e smarter navigation decisionsReady- To- NavigateInternal high sensitivity GPS sensorPre-Loaded Navionics ChartsEasy to install and ready-to-navigate right out of the boxExpandableHD Digital network sensors for radar and fishfinderDual display SeaTalk networkingSIRIUS weather and radio compatibleVideo camera inputAIS compatibility with Buddy TrackingHigh DefinitionWidescr een resolutions up to 1280 x 800Optically bonded LCD for beautiful color and contrastHigh definition view of 3D charts, satellite photos, HD Digital radar and fishfinder

C120W Multifunction Navigational DisplayPre- Loaded w/ U.S. Coastal CartographyThe all new C-Series Widescreen expands the power of multifunction navigation with larger, brilliant displays, increased performance, expanded networking and video integration. Build Your C-Series Widescreen NetworkC-Series Widescreen displays are easily expanded with SeaTalkhs digital network sensors for radar, fishfinder and satellite weather. Build a system with a single widescreen display or create a dual display C-Series Widescreen network. C-Series Widescreen displays also feature a SeaTalkng data bus port for connecting to SeaTalkng compatible instruments, autopilots, and NMEA2000 compatible devices. The NMEA2000 interface enables any C-Series Widescreen to display virtual instrument data from electronic engine instruments to trim tab systems. NMEA0183 inputs and outputs are available for AIS and third party devices. A first generation SeaTalk port is also available for networking with an external GPS sensor, LifeTag, and SeaTalk compatible instruments and autopilots.Go WiderTheatre like widescreen displayView more navigation data simultaneouslyMak e smarter navigation decisionsReady- To- NavigateInternal high sensitivity GPS sensorPre-Loaded Navionics ChartsEasy to install and ready-to-navigate right out of the boxExpandableHD Digital network sensors for radar and fishfinderDual display SeaTalk networkingSIRIUS weather and radio compatibleVideo camera inputAIS compatibility with Buddy TrackingHigh DefinitionWidescr een resolutions up to 1280 x 800Optically bonded LCD for beautiful color and contrastHigh definition view of 3D charts, satellite photos, HD Digital radar and fishfinder MP Master List

Raymarine PowerNMEA CablePowerNMEA CablePowerNMEA Cable, 7 pin...

multifunction navigationraymari ne s most powerful multifunction displays.simply connect the appropriate sensor to transform the e-series display into a full function chartplotter digital fishfinder radar or on board video system.ultra bright sunlight viewable color display.seatalk hs networkingsuper fast 100 megabit networking. connect up to 8 seatalk hs devices with simple plug and play interfacing. video integrationdispla y remote video sources from cctv cameras entertainment systems and more.export navigation video to video displays or remote monitors.use the optional 15" remote station kit to see and control your e-series from anywhere on board.instrument integrationnetwor k with seatalk seatalk2 seatalk hs nmea 0183 or nmea 2000 instruments. display data from nmea 2000 compatible engine systems. chartplotterinfor mation rich navionics vector cartography combined with satellite differential gps.digital fishfinderpatente d digital sonar technology for precise targeting of fish and bottom structure. radarraymarine radar technology delivers unmatched performance and ease-of-use.choose from a wide selection of high performance radome and open array scanners.product : raymarine e80 8.4" multifunction display manufacturer : raymarine manufacturer part no : e02011 upc : 723193020111

ST70 SmartPilot X-10 Hydraulic SystemPerfect for small hydraulically steered fishing and cruising powerboats, the ST70 SmartPilot X-10 Hydraulic Autopilot system is the perfect all-in-one-box autopilot solution.The system features the ST70 color autopilot controller. The ST70 Autopilot Control brings the convenience and flexibility of sunlight viewable display technology to autopilots. Featuring a high resolution, 3.5" TFT LCD display with 320 x 240 pixels, the ST70 Autopilot Controller?s intuitive menu and icon driven interface and simple pushbutton controls make operation simple and straightforward. In addition to its high-visibility numerical readouts, the ST70 Autopilot Controller also takes advantage of its color capabilities with graphical autopilot displays and day/night color palettes.The ST70 Autopilot Control features our next generation SeaTalkng data bus for connection to SmartPilot X-Series autopilot core packs, ST70 instruments, and also NMEA 2000 compatible devices. Fully waterproof (CFR46) and engineered for the rigors of the marine environment, the ST70 Autopilot Controller can be easily surface mounted or flush mounted, matching the profile of ST60+ and ST70 instruments, as well as Raymarine Multifunction Displays and marine monitors. Engineered for boats with 12 or 24 Volt DC electrical systems, the SmartPilot X-10 corepack is the "brains" of your Raymarine modular pilot system. The SmartPilot X-10 corepack features an integrated rate-gyro processor as standard equipment. The rate gyro, combined with Raymarine?s exclusive AST (Advanced Steering Technology) software algorithms ensure razor-sharp course keeping under any sea conditions. The SmartPilot X-10 also offers the convenience of rudder reference-less operation as well as data connections for SeaTalk, SeaTalkNG, NMEA 0183 and NMEA 2000 giving the SmartPilot X-10 unprecedented connectivity. Using SeaTalkNG networking, connect your SmartPilot X-10 to the ST70 Color Autopilot Controller and unlock exclusive features including programmable fishing patterns. SmartPilot X-10/ST70 combination allows you the freedom to work the bait while it smoothly handles the boat. Programmable patterns include circles, spirals, cloverleaf, figure 8, lazy-S, zigzag, box, box pattern search, and 180 or 360 degree turns.Finally, the muscle of this system is our Type 1 hydraulic drive unit. Designed to fit boats with hydraulic steerning cylinders with a capacity between 4.9-14 cubic inches (80-230cc), the Type 1 hydraulic provides smooth, reliable steering control under any conditions. ST70 Control Head Features3.5" Sunlight viewable displayIntuitive graphical displays for visualizing autopilot controlSimple setup and calibration with AutoLearnProgramm able AutoTack controlExtensive range of fishing patternsMultifunc tional dodge featureSeaTalkng next generation data bus interface for creating a ST70 instrument networkNMEA2000 compatibleCompati ble with Raymarine SeaTalk and SeaTalkng autopilots as well as Raymarine multifunction displaysX-10 Autopilot Core Pack FeaturesDesigned for all Raymarine Type 1 autopilot drives.Built-in rate gyro processorRaymarin e AST (Advanced Steering Technology) SoftwareAutoLearn calibration. Smart Rudder Sense technology eliminates the need for a rudder feedback sensor.NMEA 0183 and NMEA 2000 compatible. SeaTalk and SeaTalkng compatible. Automatic trolling of preset fishing patternsType 1 Hydraulic Drive FeaturesSmooth, reliable integration with boat's hydraulic steering system. Compatible with hydraulic steering systems 4.9 to 14 cubic inches (80-230cc).

ST70 SmartPilot X-10 Hydraulic SystemPerfect for small hydraulically steered fishing and cruising powerboats, the ST70 SmartPilot X-10 Hydraulic Autopilot system is the perfect all-in-one-box autopilot solution.The system features the ST70 color autopilot controller. The ST70 Autopilot Control brings the convenience and flexibility of sunlight viewable display technology to autopilots. Featuring a high resolution, 3.5" TFT LCD display with 320 x 240 pixels, the ST70 Autopilot Controller?s intuitive menu and icon driven interface and simple pushbutton controls make operation simple and straightforward. In addition to its high-visibility numerical readouts, the ST70 Autopilot Controller also takes advantage of its color capabilities with graphical autopilot displays and day/night color palettes.The ST70 Autopilot Control features our next generation SeaTalkng data bus for connection to SmartPilot X-Series autopilot core packs, ST70 instruments, and also NMEA 2000 compatible devices. Fully waterproof (CFR46) and engineered for the rigors of the marine environment, the ST70 Autopilot Controller can be easily surface mounted or flush mounted, matching the profile of ST60+ and ST70 instruments, as well as Raymarine Multifunction Displays and marine monitors. Engineered for boats with 12 or 24 Volt DC electrical systems, the SmartPilot X-10 corepack is the "brains" of your Raymarine modular pilot system. The SmartPilot X-10 corepack features an integrated rate-gyro processor as standard equipment. The rate gyro, combined with Raymarine?s exclusive AST (Advanced Steering Technology) software algorithms ensure razor-sharp course keeping under any sea conditions. The SmartPilot X-10 also offers the convenience of rudder reference-less operation as well as data connections for SeaTalk, SeaTalkNG, NMEA 0183 and NMEA 2000 giving the SmartPilot X-10 unprecedented connectivity. Using SeaTalkNG networking, connect your SmartPilot X-10 to the ST70 Color Autopilot Controller and unlock exclusive features including programmable fishing patterns. SmartPilot X-10/ST70 combination allows you the freedom to work the bait while it smoothly handles the boat. Programmable patterns include circles, spirals, cloverleaf, figure 8, lazy-S, zigzag, box, box pattern search, and 180 or 360 degree turns.Finally, the muscle of this system is our Type 1 hydraulic drive unit. Designed to fit boats with hydraulic steerning cylinders with a capacity between 4.9-14 cubic inches (80-230cc), the Type 1 hydraulic provides smooth, reliable steering control under any conditions. ST70 Control Head Features3.5" Sunlight viewable displayIntuitive graphical displays for visualizing autopilot controlSimple setup and calibration with AutoLearnProgramm able AutoTack controlExtensive range of fishing patternsMultifunc tional dodge featureSeaTalkng next generation data bus interface for creating a ST70 instrument networkNMEA2000 compatibleCompati ble with Raymarine SeaTalk and SeaTalkng autopilots as well as Raymarine multifunction displaysX-10 Autopilot Core Pack FeaturesDesigned for all Raymarine Type 1 autopilot drives.Built-in rate gyro processorRaymarin e AST (Advanced Steering Technology) SoftwareAutoLearn calibration. Smart Rudder Sense technology eliminates the need for a rudder feedback sensor.NMEA 0183 and NMEA 2000 compatible. SeaTalk and SeaTalkng compatible. Automatic trolling of preset fishing patternsType 1 Hydraulic Drive FeaturesSmooth, reliable integration with boat's hydraulic steering system. Compatible with hydraulic steering systems 4.9 to 14 cubic inches (80-230cc). MP Master List

RayTech RNS v6.0 (Full Version) Raymarine Navigation System software version 6.0. Integrates seamlessly with E-Series displays using SeaTalkhs networkingThe complete navigation solution for Windows 2000 and XP systems. Raytech RNS v6.0 provides the most comprehensive set of navigation tools on the market today including multi-format electronic charting, SeaTalkhs and hsb2 electronics integration, worldwide tides and currents, and more. What's New In RayTech RNS 6.0:Seamless integration with Raymarine E-Series displays using SeaTalkhsand your PC's Ethernet port.3D Chartplotting using Navionics Platinum Multidimensional charts.Navionics Silver, Gold, Gold + and HotMaps Premium chart compatibility. Support for Navionics USB Multicard Reader for access Navionics charts on CompactFlash. Ability to access Navionics charts from E-Series displays using SeaTalkhsnetworki ng.Transfer waypoints and routes to Raymarine E-Series display using SeaTalkhsnetworki ng.Record, pause and play-back HD Digital fishfinder display from your networked DSM300 sounder.Seamless integration with Raymarine E-Series displays using SeaTalkhs networking allows your PC full access to live radar, HD digital fishfinder, Navionics Platinum chart cartography and the full array of SeaTalk and NMEA instrumentation. Also compatible with connections to NMEA 0183, SeaTalk, and hsb2. . Optional hardware may be required. The RayTech RNS v6.0 (Full Version) Kit Includes:RayTech RNS v6.0 Software on CD-ROMRaytech RNS v6.0 Software License KeyRayTech RNS v6.0 Handbook and Installation GuideNavionics Multicard Chart ReaderSerial Data Cable (2 meter)for connection to NMEA 0183 devices or E85001 SeaTalk interface (sold seperately) Complete USA Raster Charts on DVD-ROMSoftChart Coastal Planning Charts on CD-ROMC-MAP NT+ Worldwide Planning Charts (Installs automatically with RayTech RNS v6.0)C-MAP NT+ PC Selector Program on CD-ROM (for purchasing additional C-MAP NT+ cartography)

Multifunction NavigationRaymari ne's most powerful multifunction displays.Simply connect the appropriate sensor to transform the E-Series display into a full function chartplotter, digital fishfinder, radar or on board video system.Ultra Bright Sunlight Viewable Color Display.SeaTalk hs NetworkingSuper fast 100 Megabit networking. Connect up to 8 SeaTalk hs devices with simple plug and play interfacing. Video IntegrationDispla y remote video sources from CCTV cameras, entertainment systems, and more.Export navigation video to video displays or remote monitors.Use the optional 15" Remote Station Kit to see and control your E-Series from anywhere on board.Instrument IntegrationNetwor k with SeaTalk, SeaTalk2, SeaTalk HS, NMEA 0183 or NMEA 2000 instruments. Display data from NMEA 2000 compatible engine systems. ChartplotterInfor mation rich Navionics vector cartography combined with satellite differential GPS.Digital FishfinderPatente d digital sonar technology for precise targeting of fish and bottom structure. RadarRaymarine radar technology delivers unmatched performance and ease-of-use.Choose from a wide selection of high performance Radome and Open Array scanners. MP Master List

High Performance Multifunction Navigation Display with a 12.1" Ultra Bright Sunlight Viewable Color Display. Multifunction NavigationRaymari ne's most powerful multifunction displays.Simply connect the appropriate sensor to transform the E-Series display into a full function chartplotter, digital fishfinder, radar or on board video system.Ultra Bright Sunlight Viewable Color Display.SeaTalk hs NetworkingSuper fast 100 Megabit networking. Connect up to 8 SeaTalk hs devices with simple plug and play interfacing. Video IntegrationDispla y remote video sources from CCTV cameras, entertainment systems, and more.Export navigation video to video displays or remote monitors.Use the optional 15" Remote Station Kit to see and control your E-Series from anywhere on board.Instrument IntegrationNetwor k with SeaTalk, SeaTalk2, SeaTalk HS, NMEA 0183 or NMEA 2000 instruments. Display data from NMEA 2000 compatible engine systems. ChartplotterInfor mation rich Navionics vector cartography combined with satellite differential GPS.Digital FishfinderPatente d digital sonar technology for precise targeting of fish and bottom structure. RadarRaymarine radar technology delivers unmatched performance and ease-of-use.Choose from a wide selection of high performance Radome and Open Array scanners. MP Master List

RAYMARINE NMEA INPUTOUTPUT CABLE R08004 ...

AIS500 - Class B TransceiverSee and be seen with the Raymarine AIS500 Transceiver module. Receive AIS targets and transmit your vessel information to other AIS receivers. The AIS500 easily interfaces to Raymarine multifunction displays allowing AIS targets to be graphically overlaid in both chartplotter and radar modes. Operating in the VHF maritime band, the AIS500 system includes a built-in VHF splitter, to easily integrate with your existing VHF antenna on the boat (no need for a separate antenna). The AIS500 enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessel's name, course, speed, and current navigation status. AIS500 Features: Class B AIS Receive & Transmit Dual Channel AIS Monitoring Ability - Vessel monitoring of class A and B transmissions over both standard VHF frequencies. Built-in NMEA multiplexer VHF Splitter - No need to buy a separate antenna. Utilize your existing VHF antenna and cable. Includes dedicated external GPS antenna (16 channels) NMEA 0183 - Compatibility with Raymarine A, C, E and G Series, as well as other manufacturer's units that display AIS targets Buddy Tracking via Raymarine MFD - Distinguish favorite targets (MMSIs) from others by adding to favorite list. Silent Mode - Turn off transmit function during tournaments or races if you do not wish to be seen. Targets displayed on chart and radar screens LED Status Indicator Configure via PC Software Software upgradeable through PC and RS232 AIS500 System Requirements:VHF Antenna Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibility

SmartPilot X-5 Tiller Grand PrixThe rugged drive unit of the SmartPilot X-5 Tiller GP autopilot makes it the perfect choice for larger tiller steered yachts and racers.You can steer straight to a waypoint, lock on to a given wind angle, or simply set and follow a course to steer by making the most of the full SeaTalk and NMEA compatibility. The fluxgate compass is separated from the drive unit for greater accuracy and you can mount the control unit wherever it will be within easy reach for you. The large clear ST6002 display shows you up-to-the-minute information and also acts as a multi-function instrument or navaid repeater. SmartPilot X-5 Tiller GP is also equipped with the latest SeaTalkng networking and features and integrated rate gyro processors ensuring razor-sharp course keeping under any conditions. Complete with everything needed for easy installation, the SmartPilot X-5 Tiller GP is quick to fit and simple to use. Used by the world's top single-handed race skippers, Raymarine tiller pilots meet the demands of the serious sailor.Remember, always take the fully laden displacement weight of your vessel into account. This is often 20% above the designed displacement. Do not choose a pilot which will always be working at the limit of its design capabilities. Easy-to-install cockpit mounted drive unit can be detached for quick storageBuilt-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsAutoTac k automatically turns the boat through a user- programmable turn. Perfect for when sailing with a shorthanded crew. Auto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Wind Vane Mode: Utilizing wind information from SeaTalk wind instruments SmartPilot steers to wind angle and sets the boat up so that the sails are at full trim (balanced).Fully adjustable Wind Trim setting (9 levels) provides superior performance in gusty conditions. AutoSeastate and AutoTrim modes automatically adjust for changing wind and sea conditions to hold the best course.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controls

SmartPilot X-5 TillerThe rugged drive unit of the SmartPilot X-5 Tiller autopilot makes it the perfect choice for larger tiller steered yachts and racers. The SmartPilot X-5 Tiller autopilot is designed for vessels with a laden displacement of up to 6,000kg (13,200lbs). Choose the more powerful SmartPilot Tiller X-5 GP for vessels with a laden displacement of up to 7,500kg (16,500lbs).You can steer straight to a waypoint, lock on to a given wind angle, or simply set and follow a course to steer by making the most of the full SeaTalk and NMEA compatibility. The fluxgate compass is separated from the drive unit for greater accuracy and you can mount the control unit wherever it will be within easy reach for you. The large clear ST6002 display shows you up-to-the-minute information and also acts as a multi-function instrument or navaid repeater. SmartPilot X-5 Tiller is also equipped with the latest SeaTalkng networking and features an integrated rate gyro processor ensuring razor-sharp course keeping under any conditions.. Complete with everything needed for easy installation, the SmartPilot X-5 Tiller is quick to fit and simple to use. Used by the world?s top single-handed race skippers, Raymarine tiller pilots meet the demands of the serious sailor.Remember, always take the fully laden displacement weight of your vessel into account. This is often 20% above the designed displacement. Do not choose a pilot which will always be working at the limit of its design capabilities. Easy-to-install cockpit mounted drive unit can be detached for quick storageBuilt-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsAutoTac k automatically turns the boat through a user- programmable turn. Perfect for when sailing with a shorthanded crew. Auto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Wind Vane Mode: Utilizing wind information from SeaTalk wind instruments SmartPilot steers to wind angle and sets the boat up so that the sails are at full trim (balanced).Fully adjustable Wind Trim setting (9 levels) provides superior performance in gusty conditions. AutoSeastate and AutoTrim modes automatically adjust for changing wind and sea conditions to hold the best course.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controls

Multifunction NavigationRaymari ne's most powerful multifunction displays.Simply connect the appropriate sensor to transform the E-Series display into a full function chartplotter, digital fishfinder, radar or on board video system.Ultra Bright Sunlight Viewable Color Display.SeaTalk hs NetworkingSuper fast 100 Megabit networking. Connect up to 8 SeaTalk hs devices with simple plug and play interfacing. Video IntegrationDispla y remote video sources from CCTV cameras, entertainment systems, and more.Export navigation video to video displays or remote monitors.Use the optional 15" Remote Station Kit to see and control your E-Series from anywhere on board.Instrument IntegrationNetwor k with SeaTalk, SeaTalk2, SeaTalk HS, NMEA 0183 or NMEA 2000 instruments. Display data from NMEA 2000 compatible engine systems. ChartplotterInfor mation rich Navionics vector cartography combined with satellite differential GPS.Digital FishfinderPatente d digital sonar technology for precise targeting of fish and bottom structure. RadarRaymarine radar technology delivers unmatched performance and ease-of-use.Choose from a wide selection of high performance Radome and Open Array scanners.

C90W Multifunction Navigational DisplayPre- Loaded w/ U.S. Coastal CartographyThe all new C-Series Widescreen expands the power of multifunction navigation with larger, brilliant displays, increased performance, expanded networking and video integration. Build Your C-Series Widescreen NetworkC-Series Widescreen displays are easily expanded with SeaTalkhs digital network sensors for radar, fishfinder and satellite weather. Build a system with a single widescreen display or create a dual display C-Series Widescreen network. C-Series Widescreen displays also feature a SeaTalkng data bus port for connecting to SeaTalkng compatible instruments, autopilots, and NMEA2000 compatible devices. The NMEA2000 interface enables any C-Series Widescreen to display virtual instrument data from electronic engine instruments to trim tab systems. NMEA0183 inputs and outputs are available for AIS and third party devices. A first generation SeaTalk port is also available for networking with an external GPS sensor, LifeTag, and SeaTalk compatible instruments and autopilots.Go WiderTheatre like widescreen displayView more navigation data simultaneouslyMak e smarter navigation decisionsReady- To- NavigateInternal high sensitivity GPS sensorPre-Loaded Navionics ChartsEasy to install and ready-to-navigate right out of the boxExpandableHD Digital network sensors for radar and fishfinderDual display SeaTalk networkingSIRIUS weather and radio compatibleVideo camera inputAIS compatibility with Buddy TrackingHigh DefinitionWidescr een resolutions up to 1280 x 800Optically bonded LCD for beautiful color and contrastHigh definition view of 3D charts, satellite photos, HD Digital radar and fishfinder

High Performance Multifunction Navigation Display with a 12.1" Ultra Bright Sunlight Viewable Color Display. Multifunction NavigationRaymari ne's most powerful multifunction displays.Simply connect the appropriate sensor to transform the E-Series display into a full function chartplotter, digital fishfinder, radar or on board video system.Ultra Bright Sunlight Viewable Color Display.SeaTalk hs NetworkingSuper fast 100 Megabit networking. Connect up to 8 SeaTalk hs devices with simple plug and play interfacing. Video IntegrationDispla y remote video sources from CCTV cameras, entertainment systems, and more.Export navigation video to video displays or remote monitors.Use the optional 15" Remote Station Kit to see and control your E-Series from anywhere on board.Instrument IntegrationNetwor k with SeaTalk, SeaTalk2, SeaTalk HS, NMEA 0183 or NMEA 2000 instruments. Display data from NMEA 2000 compatible engine systems. ChartplotterInfor mation rich Navionics vector cartography combined with satellite differential GPS.Digital FishfinderPatente d digital sonar technology for precise targeting of fish and bottom structure. RadarRaymarine radar technology delivers unmatched performance and ease-of-use.Choose from a wide selection of high performance Radome and Open Array scanners.

SmartPilot X-5 Wheel CorepackThe innovative SmartPilot X-5 Wheel autopilot is equipped with the fully enclosed MkII wheel-drive for simple installation and below deck autopilot performance. Complete with everything needed for easy installation, the SmartPilot X-5 Wheel is quick to fit and simple to use.Mount the separate control unit where it is easy to reach and see. The patented fluxgate compass is mounted separately for optimum performance. The LCD shows the pilot status and repeats up to seven pages of user-defined navigation data from your ST60 system. It is also equipped with the latest SeaTalkng networking and a standard rate-gyro processor ensuring razor sharp course keeping under any conditions.The SmartPilot X-5 Wheel is designed for yachts with a laden displacement of up to 16,500lbs (7,500kg)Remember, always take the fully laden displacement weight of your vessel into account. This is often 20% above the designed displacement. Do not choose a pilot which will always be working at the limit of its design capabilities. Easy-to-install Mk II wheel-drive delivers below deck autopilot performanceSimple clutch engagement mechanismBuilt- in rate gyro sensor with Raymarine AST (Advanced Steering Technology) AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsNo rudder reference sensor requiredAutoTack automatically turns vessel at predetermined angleWind Vane mode maintains course relative to apparent wind (wind data input required) SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesSmartPilo t X-5 course computerRugged, cockpit mounted drive unitFluxgate compassCompatible with optional wireless hand held remote controlsAdditiona l autopilot control heads can be added to the system

ST70 Multifunction Instrument DisplayST70 multifunction instruments offer a brand new way of visualizing insturmentation. Featuring a graphical user interface and high resolution color displays, ST70 provides unmatched versatility and ease of use. Designed for simple setup and extensive customization, ST70 delivers an array of intuitive digital, graphical and historical display options. ST70 systems are built on Raymarine's new SeaTalkNG Next Generation data bus. A fast CAN Based network, SeaTalkNG enables the simple interconnection of multiple ST70 instruments, transducers and NMEA 2000 compatible devices.Depth, Speed, Wind, Nav., Engine and MoreSunlight viewable color display technologyHigh resolution graphical displays of analog, digital, bar graph and historical dataSeaTalkNG Next Generation Data bus interface with NMEA2000 interconnectivity Low profile flush mounting or surface mount (surface mount adapter supplied with each unit)ST60 Plus footprintCan easily be retrofitted to ST60 surface mount installations

SmartPilot X-5 Tiller Grand PrixThe rugged drive unit of the SmartPilot X-5 Tiller GP autopilot makes it the perfect choice for larger tiller steered yachts and racers.You can steer straight to a waypoint, lock on to a given wind angle, or simply set and follow a course to steer by making the most of the full SeaTalk and NMEA compatibility. The fluxgate compass is separated from the drive unit for greater accuracy and you can mount the control unit wherever it will be within easy reach for you. The large clear ST6002 display shows you up-to-the-minute information and also acts as a multi-function instrument or navaid repeater. SmartPilot X-5 Tiller GP is also equipped with the latest SeaTalkng networking and features and integrated rate gyro processors ensuring razor-sharp course keeping under any conditions. Complete with everything needed for easy installation, the SmartPilot X-5 Tiller GP is quick to fit and simple to use. Used by the world's top single-handed race skippers, Raymarine tiller pilots meet the demands of the serious sailor.Remember, always take the fully laden displacement weight of your vessel into account. This is often 20% above the designed displacement. Do not choose a pilot which will always be working at the limit of its design capabilities. Easy-to-install cockpit mounted drive unit can be detached for quick storageBuilt-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsAutoTac k automatically turns the boat through a user- programmable turn. Perfect for when sailing with a shorthanded crew. Auto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Wind Vane Mode: Utilizing wind information from SeaTalk wind instruments SmartPilot steers to wind angle and sets the boat up so that the sails are at full trim (balanced).Fully adjustable Wind Trim setting (9 levels) provides superior performance in gusty conditions. AutoSeastate and AutoTrim modes automatically adjust for changing wind and sea conditions to hold the best course.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controls MP Master List

SmartPilot X-5 TillerThe rugged drive unit of the SmartPilot X-5 Tiller autopilot makes it the perfect choice for larger tiller steered yachts and racers. The SmartPilot X-5 Tiller autopilot is designed for vessels with a laden displacement of up to 6,000kg (13,200lbs). Choose the more powerful SmartPilot Tiller X-5 GP for vessels with a laden displacement of up to 7,500kg (16,500lbs).You can steer straight to a waypoint, lock on to a given wind angle, or simply set and follow a course to steer by making the most of the full SeaTalk and NMEA compatibility. The fluxgate compass is separated from the drive unit for greater accuracy and you can mount the control unit wherever it will be within easy reach for you. The large clear ST6002 display shows you up-to-the-minute information and also acts as a multi-function instrument or navaid repeater. SmartPilot X-5 Tiller is also equipped with the latest SeaTalkng networking and features an integrated rate gyro processor ensuring razor-sharp course keeping under any conditions.. Complete with everything needed for easy installation, the SmartPilot X-5 Tiller is quick to fit and simple to use. Used by the world?s top single-handed race skippers, Raymarine tiller pilots meet the demands of the serious sailor.Remember, always take the fully laden displacement weight of your vessel into account. This is often 20% above the designed displacement. Do not choose a pilot which will always be working at the limit of its design capabilities. Easy-to-install cockpit mounted drive unit can be detached for quick storageBuilt-in rate gyro sensor with Raymarine AST (Advanced Steering Technology) gives superb steering performance and boat handling. AutoLearn technology simplifies calibration and enables the autopilot to automatically adapt to changing sea conditionsAutoTac k automatically turns the boat through a user- programmable turn. Perfect for when sailing with a shorthanded crew. Auto Speed Gain adjusts the amount of helm applied at different boat speeds for a smooth, safe ride.Wind Vane Mode: Utilizing wind information from SeaTalk wind instruments SmartPilot steers to wind angle and sets the boat up so that the sails are at full trim (balanced).Fully adjustable Wind Trim setting (9 levels) provides superior performance in gusty conditions. AutoSeastate and AutoTrim modes automatically adjust for changing wind and sea conditions to hold the best course.Course Memory: After a manual course change to avoid an obstruction, simply press Auto for one second to return to your previous course.SeaTalk&, SeaTalkng, NMEA0183 and NMEA2000 compatibleModular system includesST6002 Autopilot ControllerSmartPi lot X-5 course computerRugged, cockpit mounted drive unitFluxgate compassSystem can be expanded with multiple autopilot controls and wireless hand held remote controls MP Master List

AIS500 - Class B TransceiverSee and be seen with the Raymarine AIS500 Transceiver module. Receive AIS targets and transmit your vessel information to other AIS receivers. The AIS500 easily interfaces to Raymarine multifunction displays allowing AIS targets to be graphically overlaid in both chartplotter and radar modes. Operating in the VHF maritime band, the AIS500 system includes a built-in VHF splitter, to easily integrate with your existing VHF antenna on the boat (no need for a separate antenna). The AIS500 enables the wireless exchange of navigation status between vessels and shore-side traffic monitoring centers. Commercial ships, ocean going vessels and other boats equipped with AIS transmitters broadcast AIS messages that include the vessel's name, course, speed, and current navigation status. AIS500 Features: Class B AIS Receive & Transmit Dual Channel AIS Monitoring Ability - Vessel monitoring of class A and B transmissions over both standard VHF frequencies. Built-in NMEA multiplexer VHF Splitter - No need to buy a separate antenna. Utilize your existing VHF antenna and cable. Includes dedicated external GPS antenna (16 channels) NMEA 0183 - Compatibility with Raymarine A, C, E and G Series, as well as other manufacturer's units that display AIS targets Buddy Tracking via Raymarine MFD - Distinguish favorite targets (MMSIs) from others by adding to favorite list. Silent Mode - Turn off transmit function during tournaments or races if you do not wish to be seen. Targets displayed on chart and radar screens LED Status Indicator Configure via PC Software Software upgradeable through PC and RS232 AIS500 System Requirements:VHF Antenna Chartplotter, Multifunction display or PC application with NMEA 0183 input and AIS compatibility MP Master List