> phone jack digital to analog

Konexx Single-Channel Digital Wall Interface (DWI) Adapter for Siemens Rolm PBXs, Need an analog port to use a cordless phone cordless headset conferencing system fax/modem or other device behind your PBX? Just plug this adapter into your telephone wall jack and you have one. Much simpler (and cheaper) than running a separate analog line. There's also a port for your digital phone so it can share the same jack.No PBX programming required. This is truly a plug-and-play solution so you can have your analog device online in just minutes. Your digital phone will continue to operate as usual any time you're not using your analog device. If you use the adapter with a cordless phone the connection is completely seamless. Both the cordless and your digital phone will ring incoming calls to your extensionand you can answer on either. You're free to move while you talk. And you don't have to worry about missing important calls when you can carry your extension with you. If you use the adapter with a fax/modem you have full support for V.90 standards so you'll enjoy reliable transmission at up to 33600 bps. The adapter converts modem touch-tone dialing tones (a.k.a. DTMF) into digital code to communicate through the PBX. This adapter measures 3-3/4" l. x 1-1/2" w. x 1" h. weighs 2.7 ounces and is powered through an AC adapter. Compatibility: Use this adapter with Siemens Rolm 100 200 300 400 and 600-series phone sets.Before you order:Adapter is NOT compatible with telephone sets that connect via 50-pin connectors. Found in Phone Accessories > Jacks & Couplers

Konexx Single-Channel Digital Wall Interface (DWI) Adapter for DEFINITY PBXs, Need an analog port to use a cordless phone cordless headset conferencing system fax/modem or other device behind your PBX? Just plug this adapter into your telephone wall jack and you have one. Much simpler (and cheaper) than running a separate analog line. There's also a port for your digital phone so it can share the same jack.No PBX programming required. This is truly a plug-and-play solution so you can have your analog device online in just minutes. Your digital phone will continue to operate as usual any time you're not using your analog device.If you use the adapter with a cordless phone the connection is completely seamless. Both the cordless and your digital phone will ring incoming calls to your extensionand you can answer on either. You're free to move while you talk. And you don't have to worry about missing important calls when you can carry your extension with you. If you use the adapter with a fax/modem you have full support for V.90 standards so you'll enjoy reliable transmission at up to 33600 bps. The adapter converts modem touch-tone dialing tones (a.k.a. DTMF) into digital code to communicate through the PBX. This adapter measures 3-3/4" l. x 1-1/2" w. x 1" h. weighs 2.7 ounces and is powered through an AC adapter. Compatibility: Use this adapter with AT&T/Lucent/Avaya DEFINITY PBXs System 75/85 or ProLogix Solution PBXs equipped with 6400 7400 and 8400-series phone sets.Before you order: Adapter is NOT compatible with telephone sets that connect via 50-pin connectors. Found in Phone Accessories > Jacks & Couplers

The Konexx Konference allows you to connect analog conference call units or direct-connect speakerphones to virtually any digital phone system. By interfacing with the telephone handset, this product lets you avoid the cost of installing dedicated analog lines. PRODUCT FEATURES: Works with virtually any conference unit or direct connect speakerphone; Four-position switch makes Konference compatible with virtually any digital phone system; Eliminate costly dedicated analog line installations and communication adapters; Powered by supplied AC adapter.

Specification: DCV: 0 - 0.2 - 2 - 20 - 200 - 600 V Accuracy: Digital +/- 0.5% Accuracy: Analog +/- 3.00% ACV: 0 - 2 - 20 - 200 V Accuracy: Digital +/- 0.8% Accuracy: Analog +/- 4.00% DCA: 0- 200u - 2m - 20m - 200mA - 10A Accuracy: Digital +/- 1.0% Accuracy: Analog +/- 3.00% Accuracy: (200mA) Digital +/- 1.2% Accuracy: (200mA) Analog +/- 3.00% Accuracy: (10A) Digital +/- 1.5% Accuracy: (10A)Analog +/- 3.0% ACA: 0- 200u - 2m - 20m - 200mA - 10A Accuracy: Digital +/- 1.5% Accuracy: Analog +/- 4.00% Accuracy: (200mA) Digital +/- 1.8% Accuracy: (200mA) Analog +/- 4.00% Accuracy: (10A) Digital +/- 2.0% Accuracy: (10A) Analog +/- 4.0% R: 0 - 2K - 20K - 200K - 2M - 20M Ohms Accuracy: Digital +/- 0.8% Accuracy: Analog +/- 3.00% Accuracy: (0~200 & 20M ohms) Digital +/- 1.2% Accuracy: (0~200 & 20M ohms) Analog +/- 3.00% Diode Test: Test current: approx 1mA Test voltage: approx 2.4V Continuity Buzzer: 0~30 ohms Sound Battery Tester: 1.5V / 9V Input Impedance: 600 Ohms Battery: 1.5V x 2, AA, 9Vx1 6F22 Size: 190 x 108 x 50 (mm) Weight: 470 gm Feature: Analog & Digital readout 1.5V & 9V Battery tester Zero Adjustment All range fused Rubber Holster Confirms to the EN61010/IEC1010 standard CAT II 600V Package Content: Test leads & Battery included Warranty : 1 years *** Click to go back to Analog Meter Section to see more *** *** Click to go back to Digital Meter (Less than $50) Section to see more *** *** Click to go back to Multi-meter Section to see more ***

Enables you to attach analog recording devices to your Definity telephone system. Compatible with 2-wire telephones such as 8410D, 8434DX, 8403, 9410D, Callmaster III, 6408D+, 6416D+, 6424D+ and Callmaster VI. Installed between the digital line of your telephone system and your analog recorder or voice logger. ) ) Free Ground Shipping -->