> nv5000 4 port expansion

The NVT Model NV-3262R is a 32-port active (amplified) device that allows the reception of real-time monochrome or color video up to one mile (1,6km) on Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC of Category-5. Baseband (composite) signals of any type are supported. The NV-3262R has screw terminal video inputs. The unparalleled interference rejection and low emissions allow long run video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. This allows the use of shared or existing cable plant. Ground-lifting ensures no annoying "hum-bars" when ground potential differences exist. With built-in transient protection, damaging voltage spike problems are eliminated. Perfect for larger CCTV installations where port density and camera number growth are prevalent. Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub, 5,280ft/1 mile (1,6km) when used with NV-653T active transmitter and Cat-2 or 3 wire and 8,000ft/1.5 miles (2,4km)NTSC when used with NV-653T and Cat-5 or better Available with screw terminal (NV-3262R) or RJ45 (NV-3262J) inputs High-Density 19" 1U high enclosure Compatible with qualified UTP cameras Built-in transient protection & ground lifting Built-in sharpness and brightness controls; Green Active LED for each port Includes 32 2-foot (60cm) coax jumper cables & rackmount hardware Limited lifetime warranty

The NVT NV?1613J is a 16-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Available with RJ45 video inputs. "Up the coax" type P/T/Z signals may be sent over the same wire pair at distances up to 750ft (225m). The unparalleled interference rejection ability of the NV-1613J Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. Use with the NV?214A?M, NV?413A, NV?813A, NV?1613Aor NV?3213A as a rack-mountable passive transmitter or receiver at distances up to 750ft (225m) Use with the NV?452R, NV?652R, NV?862R, NV?1662R, or NV?3262R as a rack-mountable passive transmitter for distances up to 3,000ft (1km) High-Density 19" 1U high enclosure features 16 ports Compatible with qualified OEM cameras No power required Built-in transient protection Supports "up-the coax" type P/T/Z control signals up to 750ft (225m) Hub Kit includes 16 2-foot (60cm) coax jumper cables & rackmount hardware PDF Spec Sheet

The NVT Model NV-813J is an 8-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. Available with RJ45 video inputs. "Up the coax" type P/T/Z signals may be sent over the same wire pair at distances up to 750ft (225m). The unparalleled interference rejection ability of the NV-813J Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. Use with the NV?214A?M, NV?413A, NV?813A, NV?1613A, or NV?3213A as a rack-mountable passive transmitter or receiver at distances up to 750ft (225m) ** Use with the NV?452R, NV?652R, NV?862R, NV?1662R, or NV?3262R as a rack-mountable passive transmitter for distances up to 3,000ft (1km) High-Density 19" 1U high enclosure features 8 ports Compatible with qualified OEM cameras No power required Built-in transient protection Supports "up-the coax" type P/T/Z control signals up to 750ft (225m) Hub Kit includes 8 2-foot (60cm) coax jumper cables & rackmount hardware

The NVT Model NV-813A is an 8-port passive transceiver hub that allows transmission of real-time monochrome or color video over Unshielded Twisted-Pair (UTP) telephone wire. Baseband (composite) signals of any type are supported. "Up the coax" type P/T/Z signals may be sent over the same wire pair at distances up to 750ft (225m). The unparalleled interference rejection ability of the NV-813A Hub allows video signals to co-exist in the same wire bundle as telephone, datacom, or low-voltage power circuits. Perfect for larger CCTV installations where port density and camera number growth are prevalent. Use with any NVT passive transceiver or hub as a rack-mountable passive transceiver at distances up to 750ft (225m) Use with any NVT active receiver or hub as a rack-mountable passive transmitter for distances up to 3,000ft (1km) High-Density 19" 1U high enclosure features 8 ports (NV-813A), 16 ports (NV-1613A), or 32 ports (NV-3213A) Compatible with qualified UTP cameras No power required Built-in transient protection Supports "up-the coax" type control signal up to 750ft (225m) Includes 8, 16 or 32 2-foot (60cm) coax jumper cables & rackmount hardware Limited lifetime warranty

The NV862R is a 8-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC using Category-5 or better. Available with screw terminal video inputs. The 8 channel distribution amplifier hub features quadruple outputs/channel for large high-density applications. 1U rack-mountable active receiver distribution amplifier hubs provide signal conditioning in the form of ground-lifting, distance EQ, and transient protection. Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub, 5,280ft/1 mile (1,6km) when used with NV-653T active transmitter and Cat-2 or 3 wire and 8,000ft/1.5 miles (2,4km) NTSC when used with NV-653T and Cat-5 or better 8-channel hubs feature four outputs/channel and 16-channel hubs have dual outputs/channel Available with screw terminal (NV-862R & NV-1662R) or RJ-45 (NV-862J & NV-1662J) video inputs High-Density 19" 1U high enclosure for all four models Compatible with qualified UTP cameras Built-in transient protection & ground lifting Built-in sharpness and brightness controls; Green Active LED for each port Includes 2-foot (60cm) coax jumper cables & rackmount hardware

The NV1662R is a 16-channel active (amplified) distribution amplifier device that allows the transmission of real-time monochrome or color video on up to one mile (1,6km) using Category-2 or 3 Unshielded Twisted-Pair (UTP) or up to 1.5 miles (2,4km) NTSC using Category-5 or better. Available with screw terminal video inputs. The 16-channel distribution amplifier hub features quadruple outputs/channel for large high-density applications. 1U rack-mountable active receiver distribution amplifier hubs provide signal conditioning in the form of ground-lifting, distance EQ, and transient protection. Full-motion CCTV video at distances up to 3,000ft (1km) when used with any passive NVT transceiver or hub, 5,280ft/1 mile (1,6km) when used with NV-653T active transmitter and Cat-2 or 3 wire and 8,000ft/1.5 miles (2,4km)NTSC when used with NV-653T and Cat-5 or better 8-channel hubs feature four outputs/channel and 16-channel hubs have dual outputs/channel Available with screw terminal (NV-862R & NV-1662R) or RJ-45 (NV-862J & NV-1662J) video inputs High-Density 19" 1U high enclosure for all four models Compatible with qualified UTP cameras Built-in transient protection & ground lifting Built-in sharpness and brightness controls; Green Active LED for each port Includes 2-foot (60cm) coax jumper cables & rackmount hardware

Audi 5000 expansion tank/coolant reservoir hose manufactured by CRP for 1984-1985 Audi 5000 S Turbo Audi 5000. Autohaus AZ offers high-quality Audi 5000 expansion tank/coolant reservoir hose and would love to be able to help you save money on all your Audi parts needs. Free shipping on orders over $50.

A Solera style blend of ports made from Chardonnay, Chenin Blanc, Semillon, Gewurtraminer and Pinot Grigio. Melons and Spice. Not too sweet very refreshing. Great with lighter desserts and really great over-the-rocks with a twist of lime as a aperitif.

Our multi-vintage port wine is the fusion of several grape varieties, mainly Ruby Cabernet, Zinfandel, Barbera, and Royalty, chosen to create a balance of rich, plummy, chocolate aromas with lively berry-like scents. Our port is only moderately sweet (5-6 percent residual sugar) and goes satisfying sipped alone by the fire as the evening winds down.

Three Muses Ruby Port- this port is also in a solera, but much younger than the tawny solera and with only two tiers . ruby port is meant to be grapey and heartwarming, so when we bottle three muses from the solera- usually in the spring- we add one barrel of port from the most recent vintage to each four barrels from the solera. The Solera contains ports from Cabernet, Merlot and Lemberger-hence, 3 muses ( how many muses can you name?) The wine gets its complexity from blending and aging in the solera and its freshness from young port. Great with cheese and/or not-too-sweet chocolate. I like it with a medium robusto out on the patio with my dogs almost any evening.