> nikon flash units

Exposure control: All TTL functions operate normally when using the Ray Flash. As with standard flash use, manual exposure control requires the use of a light meter or test-shots The Ray Flash is designed to fit Nikon SB800 flash units. Ray Flash is lightweight and is easily supported by hot-shoe mounted flash units. The 4 1/8" internal diameter of the Ray Flash is large enough to accept almost all professional lenses from Nikon & Canon Light output: The Ray Flash results in minimal light loss from your flash's standard output. The Ray Flash does not change a flash's color temperature It is lightweight, portable and allows TTL metering

SG-2 Diffuser for built-in speedlight, soft case SS-SU4.Ideal for use with Nikon speedlights in multiple flash lighting setups to reduce background shadows, provide a second light for fill or main light purposes, and for background or accent lights.When connected to an accessory Nikon Speedlight, the SU-4 enables wireless TTL multiple flash control while using the cameras built-in Speedlight as a master unit. The Diffuser SG-2 is provided to reduce the flash output of the built-in Speedlight.You can use several SU-4 Flash Controllers simultaneously, too. NOTE: This unit is not compatible with digital SLR cameras.

DMF880 TTL flash Unit for Nikon Cameras, with Built-in Macro Controller - Two DMT Macro Twin Flashes - Power/Sync Cord (Permanently attached to DMT Twin Flashes).DMF880 Macro Controller + Twin Flash System Tumax, the brand name of a leading flash manufacturer, introduces the DMF880 TTL flash unit with built-in macro controller. This dual-purpose flash unit can act as a medium power TTL flash unit or as the control unit for the DMT twin flash set. The DMF880 is compact but has a guide number of 104 (in feet). It's flash head can tilt up 90° for bounce flash applications. The flash head also has a manual zoom head to match the angle of coverage and extend the flash range when used with standard and moderate telephoto lenses. The DMF880 has a switch that turns the macro control function on and off. In the off position, this switch will also cut power to the DMT twin flash units. The DMT twin flash units each have a guide number of 19.7 (in feet). Their permanently attached syncro-power cord plugs into the DMF880 flash/macro controller to power the flash units. These flash units are very light because they do not use batteries. The DMT flash heads can tilt up 90° for even more creative lighting options. The DMF880 TTL flash/macro controller + DMT twin flash are available as a set for Canon E-TTL, Nikon i-TTL, Olympus TTL, Pentax P-TTL, Sony ADI.

QMM1 Twin Flash Mount with Sturdy Base Plate 1/4-20 Camera Screw, & Two Fully Articulating Arms with Ball Joints - DMF880 TTL flash Unit for Nikon Cameras, with Built-in Macro Controller - Two DMT Macro Twin Flashes - 63" Power/Sync Cord (Permanently attached to DMT Twin Flashes).The QMM1 is a new macro twin flash mount system designed to give flash support that is flexible, compact and easy-to-use. It can be either hand-held or mounted on a tripod. The QMM1 has a sturdy base plate machined from aircraft grade aluminum that can hold up to years of use. It has a 1/4-20 camera screw in the base plate that can mount almost any digital SLR camera. Permanently attached to the base plate of the QMM1 are two fully articulating arms made from high-quality ultra lightweight flex-conduit. These arms allow flash units to be positioned at almost any angle around the subject for a wide variety of lighting effects. Ball joints supporting the flash units allow for even greater control of the flash position and angle. In addition, there is one 1/4 -20 treaded mount point on either side of the QMM1 to attach other accessories. Unlike a ring flash that is fixed on the camera lens yielding flat lighting, the QMM1's ability to move the flash units creates directional light that can add greater depth, definition and attention to macro subjects. This gives the photographer greater control to create the image they want. The QMM1 is designed and assembled in the USA. DMF880 Macro Controller + Twin Flash System Tumax, the brand name of a leading flash manufacturer, introduces the DMF880 TTL flash unit with built-in macro controller. This dual-purpose flash unit can act as a medium power TTL flash unit or as the control unit for the DMT twin flash set. The DMF880 is compact but has a guide number of 104 (in feet). It's flash head can tilt up 90° for bounce flash applications. The flash head also has a manual zoom head to match the angle of coverage and extend the flash range when used with standard and moderate telephoto lenses. The DMF880 has a switch that turns the macro control function on and off. In the off position, this switch will also cut power to the DMT twin flash units. The DMT twin flash units each have a guide number of 19.7 (in feet). Their permanently attached syncro-power cord plugs into the DMF880 flash/macro controller to power the flash units. These flash units are very light because they do not use batteries. The DMT flash heads can tilt up 90° for even more creative lighting options. The DMF880 TTL flash/macro controller + DMT twin flash are available as a set for Canon E-TTL, Nikon i-TTL, Olympus TTL, Pentax P-TTL, Sony ADI.

Functions only as a remote Speedlight unit Auto FP High-Speed Sync; use with fast shutter speeds achieves effective blurring of out-of-focus background elements FV lock holds flash value, enabling re-composition prior to shooting Electronic Construction - Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash only) Guide Number - 10/33 (ISO 100, m/ft), 14/46 (ISO 200, m/ft)

9 Feet / Comes with two multiple flash terminals, making off-camera TTL flash control easy / Compatible to SB- 24,25,26,27,28,50 dx,80dx,600,800

Functions only as a remote Speedlight unit Auto FP High-Speed Sync; use with fast shutter speeds achieves effective blurring of out-of-focus background elements FV lock holds flash value, enabling re-composition prior to shooting Electronic Construction - Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash only) Guide Number - 10/33 (ISO 100, m/ft), 14/46 (ISO 200, m/ft)

Functions only as a remote Speedlight unit Auto FP High-Speed Sync; use with fast shutter speeds achieves effective blurring of out-of-focus background elements FV lock holds flash value, enabling re-composition prior to shooting Electronic Construction - Automatic Insulated Gate Bipolar Transistor (IGBT) and series circuitry (for wireless remote flash only) Guide Number - 10/33 (ISO 100, m/ft), 14/46 (ISO 200, m/ft)

The perfect flash for photographers who want more power and control. Operates with a wide variety of Nikon SLR Cameras, including Nikon N65, N70, N80, N90s, N6000, N6006, N5005, N50, N2020, N4004, N2000, F100, F5, F4, FM3, FA, FE2, FM3A, F55, FM10, FE10, and other Nikon SLR Cameras Automatic TTL Controlled Fill-Flash operation. 3-D Multi-Sensor Balanced Fill-Flash with F5, F100, N90s, N80, N65 and D-Type AF Nikkor Lenses. Red-eye Reduction lamp turns on just prior to shutter release.

For Nikon D700, D300, D200, D3, D2, D2H, D2Hs, D2X, D1, D1h, D1x, D100 (only in combination with the MB-D100 multi-functional battery pack); KODAK DCS Pro 14n, DCS620; FUJI S3, S5, UVIR; Nikon Film SLR F6, F5, F100, F90, F90x, N90, N90x Achieve near studio quality photography with a portable flash bracket Maintains consistent flash position and lens to flash distance Includes Nikon shutter release and sync cord for Nikon iTTL

3D Multi-Sensor Balanced Fill-Flash with Monitor Pre-flashes Multi-Sensor Balanced Fill-Flash with Monitor Pre-flashes Matrix Balanced Fill-Flash Automatic power zoom coverage from 24mm to 50mm LCD panel with illumination

Note: Uses 2 "AAA" batteries (not included).This is truly a unique design in flash brackets. Designed first with dedicated TTL flashn photography in mind, this bracket supports 2 dedicated flash units. The bracket senses whether the camera is in the horizontal or vertical position, and fires the appropriate flash. Additionally, the TTL cord that mounts to the top of the camera has a tilt feature that facilitates close up shots, eliminating flash cut off. The bracket is adjustable, allowing for differences in sizes of units. The design is such, that the photographer is able to keep both hands on the camera as if there was no bracket, making the use of this bracket very natural. Uses 2 "AAA" batteries (not included) .

Features TTL Hot Shoe Male to Hot Shoe Female: Compatible with SB-800, SB-80DX, SB-50DX, SB-28DX, SB-28, SB-27, SB-26, SB-25, SB-24 .( Replaces SC-17 TTL Remote Cord ). Has connections for two more flashes using SC-26 or SC-27 TTL extension cords to create multi-flash set-ups.

Works as an external AF-assist illuminator for placement of SB-600 or SB-800 off-camera / 2 multiple flash terminals, making off-camera TTL control easy

The RAY FLASH Adapter is a very affordable way to achieve typical ringflash lighting quality normally only available to studio flash equipment users! The unique RAY FLASH Adapter was developed by a professional photographer from the Czech Republic. It was designed to be as light and as portable as possible. There are no electronics, no flashtubes and no cumbersome cables! It uses a clever system of acrylic light channels and reflectors to distribute the light emitted from the flash unit evenly around the large diameter of the ringflash adapter. This creates the same lighting effect normally only available from ringflash units made by studio flash equipment manufacturers, which are expensive, heavy and tethered (they have a cable from ringflash to power pack). The RAY FLASH Adapter creates a very special lighting effect: a "3-d shadow-wrapped look". Because all light originates from the front, i.e. from around the lens, it produces a virtually shadow-less look on the front of your subject, while a soft even shadow appears around the edges. It is ideally suited for fashion, portrait, beauty, wedding & macro photography as a main or fill-in light. The RAY FLASH Adapter does not change the colour temperature of the flash that powers it and the additional weight can easily be accommodated by the on-camera flash unit. The RAY FLASH Adapter is made to fit the Canon 580EX , Canon 580EXII and Nikon SB-800 , Nikon SB-900 flash units and due to the its large inner diameter the ringflash adapter will accept almost all lenses from Nikon & Canon. For model range see chart below.

Attach the AS-10 to SB-80DX, SB-27, SB-22S, SB-30 or SB-16B Speedlites. Connect additional TTL Speedlight units with SC-18 or SC-19 Multi-Flash Sync Cords. AS-10 Controls up to three TTL Speedlight flash units simultaneously.

I am selling a METZ NIKON SCA 3401 M4 FLASH ADAPTER New in Box. This adapter enables Metz flashes that are compatible with the SCA 3000 system to work with dedicated Nikon cameras, and provides sync and TTL operation. For the Nikon camera models EM, FA, FE, FE2, FG, FG-20, FM2, F4, F4S, F90, F-301, F-401, F-401S, F-401X, F-501, F-601, F-601 AF, F601M, F-801, F-801 S, N2000, N2020, N4004, N6000, N6006, N8008, and N90. Sorry, NO shipping to INDONESIA, MALAYSIA, NIGERIA, THAILAND, SOUTH KOREA or A

The Ray Flash is a unique adapter for your hot-shoe flash unit designed to replicate the lighting effect produced by traditional, expensive, and heavy powered studio ring flash units. The Ray Flash is portable and lightweight, and has been designed to take advantage of a camera's TTL metering capabilities. Because the Ray Flash relieson the hot-shoe flash to generate its light, it contains no electronics, no flash tubes and requires no cumbersome cables. The light distribution is accomplished through a sophisticated system of internal prisms, reflectors and light-shapers designed to distribute and project the light evenly around the lens. The Ray Flash creates a unique ring flash lighting effect: a three- dimensional shadow-wrapped look around the subject. Because ring flash light originates from a circle around the lens, it produces a virtually shadowless look on the front of your subject, while producing a soft even shadow around the edges. The versatile Ray Flash is ideally suited for fashion, wedding, portrait, journalistand macro photography as either a main or fill-in light. Exposure control: All TTL functions operate normally when using the Ray Flash. As with standard flash use, manual exposure control requires the use of a light meter or test-shots. The Ray Flash is designed to fit the Canon 580EX (MKI & MKII) and Nikon SB800 flash units. Weighing about 16 oz, the Ray Flash is lightweight and is easily supported by hot-shoe mounted flash units. The 4 1/8" internal diameter of the Ray Flash is large enough to accept almost all professional lenses from Nikon & Canon. Light output: The Ray Flash results in only one stop of light loss from your flash's standard output. The Ray Flash does not change a flash's color temperature. How to fit the Ring Flash Adapter: Mount the Ray Flash to the front of a portable flash unit by sliding the Ray Flash over the front of the flash unit. Then turn the lock on top of the Ray Flash to hold the Ray Flash firmly in place. The Ray Flash requires no modifications to your flash unit to mount.

For most Nikon Digital or Film SLR cameras Allows positioning of Flash anywhere within 3ft of the camera Direct the Flash as you choose for custom and extreme lighting applications No more Red Eye !

Heavy-duty coiled cable (Extends up to 6.5 Feet) Compatible with Nikon Brand & Nikon Compatible Flashes Works with SB-900, SB-800, SB-600, SB-400, SB-140, SB-80DX, SB-50DX, SB-30, SB-29/29s, SB-28/28DX, SB-27, SB-26, SB-25, SB-24, SB-23, SB-22/22s, SB-21B, SB-20, SB-16B, SB-15, SB-14, SB-11, etc. Compatible cameras include Nikon D60, D50, D40, D40x, D70, D70s, D80, D90, D5000, D2H, D100, D200, D300, D700, D1H, D1X, D2X, D3, F6, F5, F100, N80, N75 or N65, etc. 1 Year Warranty

Velcro Pads.@@ Qnexus, when mounted to Quantum's new-generation Qflash 5d-R flash units, this ingenious receiver/decoder "reads" wireless TTL signals directly from Canon and Nikon shoe mount master flashes. It integrates multiple high-power Qflash 5d-R's into Canon or Nikon wireless TTL systems where they act as dedicated, full-function remotes controlled totally from the camera's flash menu. Qnexus supports all Canon and Nikon wireless flash functions including Manual, Automatic, TTL and TTL-Ratio. @@ A Qnexus equipped Qflash 5d-R produces 150 to 400 watt-seconds of beautiful studio-quality lighting (models QFT5d-R and QFX5d-R respectively). Qnexus greatly expands creative options for portrait and event photography. For example, photographers can make a great portable portrait set-up by using a Qflash in a softbox or with an umbrella, as the main light source, and use their Canon or Nikon flash for fill. Or, for those tricky, large group photos, they can use any combination of Qflashes with camera manufacturer's flashes as remotes, all controlled by a Nikon or Canon wireless controller. Qnexus/Qflash adds both power and versatility to the system. @@ Qnexus features a multi-function LED that indicates it is programmed for either Nikon or Canon wireless flash commands. Qnexus also indicates when the unit receives a command from the on-camera master flash or controller. A channel dial corresponds to the channel settings for Nikon or Canon systems. In addition, "Group" settings can be utilized to control multiple Qflashes with TTL ratios, or combine them in one group for extraordinary wireless flash power.

OFF CAMERA SHOE CORD FOR NIKON FLASH SC-28 3FEET COILED NEW UNOPENED ITEM Ü HEAVY-DUTY COILED CABLE Ü MADE BY ZEIKOS - BRAND NEW Ü TOTAL DEDICATION BETWEEN CAMERA AND FLASH USING ISO CONNECTION Ü 3 YEARS WARRANTY - WILL MOUNT TO ON NIKON 35MM AUTOFOCUS FILM CAMERA OR ANY NIKON DIGITAL SLR CAMERA - COMPATIBLE WITH ALL NIKON SPEEDLIGHT FLASHES New Page 1 The Zeikos ZE-OCSCN Off Camera Shoe Cord for Nikon Cameras flash is perfect for when you need to move your flash away from the camera for s

KIT INCLUDES 3 PRODUCTS — All Brand New Items with all Manufacturer- supplied Accessories + Full USA Warranties: Nikon SJ-1 Speedlight Color Gel Filter Set — includes Fluorescent [FL-G1 & FL-G2] and Tungsten [TN-A1 & TN-A2] light conversion filters, plus Red, Blue, Yellow and Amber creative color flash filters PLUS + Precision Design 4 NiMH Batteries with Rapid Charger + Precision Design Deluxe 6-Piece Lens & Digital SLR Camera Cleaning Kit This Nikon SJ-1 Color & NiMH Power Package gives you the creative control you want and the professional results you need to color-correct and light-balance your Nikon SB-600 or SB-800 Speedlight for impressive fill-flash pictures outdoors and correctly color-balanced photographs indoors as well as the power to paint the town red — or blue or yellow or amber

SquareTrade AP6.0 Untitled 2 vcc113 (257856 ) Untitled 2 Cord for Nikon Flash SC-28 SB-800 SB-600 SB-400 SB-900 Description New Page 3 New Page 1 Dedicated i-TTL Off-Camera Flash Shoe Cord Coiled Extension Cord for All Nikon Cameras Flash Replacement FOR Nikon SC-28 Extends to 3 Feet This ZEIKOS Off-Camera i-TT

SquareTrade AP6.0 Untitled 2 vcc113 (257856 ) Untitled 2 Off Camera Shoe Cord for Nikon Flash SC-28 3feet coiled Description New Page 3 New Page 1 Dedicated i-TTL Off-Camera Flash Shoe Cord Coiled Extension Cord for All Nikon Cameras Flash Replacement FOR Nikon SC-28 Extends to 3 Feet This ZEIKOS Off-Camera i-T