> hot fix crystals

Darice Hot Fix Glass Stone Embellishments come in a variety of colors and sizes that can be quickly added to any number of craft surfaces. Each stone has an adhesive backing that when heated will adhere to your crafting surface. Create designs, spell out words or randomly place stones for a touch of sparkle. Apply with Rhinestone Setter Hot-Fix Applicator-sold separately. 5mm Crystal 400pc

Darice Hot Fix Glass Stone Embellishments come in a variety of colors and sizes that can be quickly added to any number of craft surfaces. Each stone has an adhesive backing that when heated will adhere to your crafting surface. Create designs, spell out words or randomly place stones for a touch of sparkle. Apply with Rhinestone Setter Hot-Fix Applicator-sold separately. 4mm Crystal 750pc

Approx. 3" wide and 2.5" tall. Made of crystal rhinestones. Easy to apply and look beautiful. Just slowly peel away the white plastic backing, position sticky side down, and iron on with a household iron (no steam) for about 1-2 minutes.

Darice Hot Fix Glass Stone Embellishments come in a variety of colors and sizes that can be quickly added to any number of craft surfaces. Each stone has an adhesive backing that when heated will adhere to your crafting surface. Create designs, spell out words or randomly place stones for a touch of sparkle. Apply with Rhinestone Setter Hot-Fix Applicator-sold separately. 4mm Crystal Aurora Borealis 750pc

Approx. 3" tall and 3.25" wide. Made of crystal, red, blue rhinestones and silver star nailheads. Easy to apply and look beautiful. Just slowly peel away the white plastic backing, position sticky side down, and iron on with a household iron (no steam) for about 1-2 minutes. Do not slide iron back and forth as you press. We recommend using our hot fix applicator to secure the stars on the design in addition to ironing.

Approx. 3" tall and 3.25" wide. Made of crystal, red, blue rhinestones and silver star nailheads. Easy to apply and look beautiful. Just slowly peel away the white plastic backing, position sticky side down, and iron on with a household iron (no steam) for about 1-2 minutes. Do not slide iron back and forth as you press. We recommend using our hot fix applicator to secure the stars on the design in addition to ironing.

Perfect for making your own rhinestone, rhinestud, and nailhead designs. Two layers with clear peal-away adhesive backed top and white backing. Makes it easy to apply hot fix designs with household iron. 100 meters (110 yards) roll, 24cm wide (9.5 inches)

Apply hot fix decorations such as rhinestones and rhinestuds to machine embroidery designs, clothing, craft items, shoes, purses, home decor and more.

A complete set of iron on hot fix sequins. These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a halographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package. 9 packages is this set for a total of over 8000 sequins!

High quality crystal rhinestones are used in all our original designs. Following Martini designs are available in stock. Applying our decals are fun and entertaining. All you need is a common household iron. _________________ _________________ __________ HOW TO APPLY IRON ON TRANSFERS ----------------- ----------------- ----------------- ----------------- ------------ Carefully remove the white paper backing. Position the design onto fabric. Clear Mylar film will hold the design together. Set your iron to the proper temperature for the material. Delicate setting for finer fabrics like silk or polyester, higher setting for cotton and denim. Allow iron to heat thoroughly. MAKE SURE STEAM IS OFF. Leave iron on the design for approximately 25-45 seconds. Allow more time for cotton and denim, and less time for finer fabrics. For large designs you may need to move the iron several times to heat all the trims. When applying transfers with large rhinestones, allow extra time due to thickness of crystal. THIS IS THE MOST IMPORTANT STEP IN APPLICATION PROCESS.Turn the item inside out and press again from the back. Allow to cool for approximately 3-5 minutes so that hot glue resets and forms a permanent bond with fabric. Slowly pull off clear Mylar film. If, while removing the Mylar, any of the trims are not firmly attached, carefully reposition the Mylar and repeat the ironing process. Allow the trims to cool and rub your fingers over them. If any trims feel loose, reapply the iron as above.

Huge Set of 14440 Hotfix Rhinestones. The colors included in this set are Amber Red, Emerald Green, Shocking Pink (Mazanta), Topaz, Smoked Topaz, Orange, Pinkish, Citrine Yellow, Sky Blue, and Diamond Color. This set has a good mix of Light and Dark colors. Hence if you are looking to start the hobby of Rhinestones or want to add to your collection of Rhinestones then this is a perfect set for you. You will receive 1 package of Each color containing of 10 gross each for a total of 100 gross (14400 pieces). These rhinestones are all precision cut multi-faceted, flatbacked of the finest Quality. Use these beautiful Rhinestones to decorate and add a sparkle to any of your items likes Cellphones, T-shirts, Watches, Purses, leather goods, Clothing, Doll clothes, Scrapbooking, Embroidery Designs and many more..... just think of the possibilities. Each rhinestone has a special glue on bottom that melts when touched by an iron, and then sticks to the material on which the Rhinestone is placed.

Apply rhinestones to almost any surface with this hot-fix applicator. Simply heat special hot fix rhinestones with tip of applicator. Includes 7 hot fix tips (4 crystal, 3 stud) and support stand.

High quality crystal rhinestones are used in all our original designs. Following Martini designs are available in stock. Applying our decals are fun and entertaining. All you need is a common household iron. _________________ _________________ __________ HOW TO APPLY IRON ON TRANSFERS ----------------- ----------------- ----------------- ----------------- ------------ Carefully remove the white paper backing. Position the design onto fabric. Clear Mylar film will hold the design together. Set your iron to the proper temperature for the material. Delicate setting for finer fabrics like silk or polyester, higher setting for cotton and denim. Allow iron to heat thoroughly. MAKE SURE STEAM IS OFF. Leave iron on the design for approximately 25-45 seconds. Allow more time for cotton and denim, and less time for finer fabrics. For large designs you may need to move the iron several times to heat all the trims. When applying transfers with large rhinestones, allow extra time due to thickness of crystal. THIS IS THE MOST IMPORTANT STEP IN APPLICATION PROCESS.Turn the item inside out and press again from the back. Allow to cool for approximately 3-5 minutes so that hot glue resets and forms a permanent bond with fabric. Slowly pull off clear Mylar film. If, while removing the Mylar, any of the trims are not firmly attached, carefully reposition the Mylar and repeat the ironing process. Allow the trims to cool and rub your fingers over them. If any trims feel loose, reapply the iron as above.

High quality crystal rhinestones are used in all our original designs. Following Martini designs are available in stock. Applying our decals are fun and entertaining. All you need is a common household iron. _________________ _________________ __________ HOW TO APPLY IRON ON TRANSFERS ----------------- ----------------- ----------------- ----------------- ------------ Carefully remove the white paper backing. Position the design onto fabric. Clear Mylar film will hold the design together. Set your iron to the proper temperature for the material. Delicate setting for finer fabrics like silk or polyester, higher setting for cotton and denim. Allow iron to heat thoroughly. MAKE SURE STEAM IS OFF. Leave iron on the design for approximately 25-45 seconds. Allow more time for cotton and denim, and less time for finer fabrics. For large designs you may need to move the iron several times to heat all the trims. When applying transfers with large rhinestones, allow extra time due to thickness of crystal. THIS IS THE MOST IMPORTANT STEP IN APPLICATION PROCESS.Turn the item inside out and press again from the back. Allow to cool for approximately 3-5 minutes so that hot glue resets and forms a permanent bond with fabric. Slowly pull off clear Mylar film. If, while removing the Mylar, any of the trims are not firmly attached, carefully reposition the Mylar and repeat the ironing process. Allow the trims to cool and rub your fingers over them. If any trims feel loose, reapply the iron as above.

High quality crystal rhinestones are used in all our original designs. Following Martini designs are available in stock. Applying our decals are fun and entertaining. All you need is a common household iron. _________________ _________________ __________ HOW TO APPLY IRON ON TRANSFERS ----------------- ----------------- ----------------- ----------------- ------------ Carefully remove the white paper backing. Position the design onto fabric. Clear Mylar film will hold the design together. Set your iron to the proper temperature for the material. Delicate setting for finer fabrics like silk or polyester, higher setting for cotton and denim. Allow iron to heat thoroughly. MAKE SURE STEAM IS OFF. Leave iron on the design for approximately 25-45 seconds. Allow more time for cotton and denim, and less time for finer fabrics. For large designs you may need to move the iron several times to heat all the trims. When applying transfers with large rhinestones, allow extra time due to thickness of crystal. THIS IS THE MOST IMPORTANT STEP IN APPLICATION PROCESS.Turn the item inside out and press again from the back. Allow to cool for approximately 3-5 minutes so that hot glue resets and forms a permanent bond with fabric. Slowly pull off clear Mylar film. If, while removing the Mylar, any of the trims are not firmly attached, carefully reposition the Mylar and repeat the ironing process. Allow the trims to cool and rub your fingers over them. If any trims feel loose, reapply the iron as above.

Darice Hot Fix Glass Stone Embellishments come in a variety of colors and sizes that can be quickly added to any number of craft surfaces. Each stone has an adhesive backing that when heated will adhere to your crafting surface. Create designs, spell out words or randomly place stones for a touch of sparkle. Apply with Rhinestone Setter Hot-Fix Applicator-sold separately. 3mm Multi 1000pc

Darice Hot Fix Glass Stone Embellishments come in a variety of colors and sizes that can be quickly added to any number of craft surfaces. Each stone has an adhesive backing that when heated will adhere to your crafting surface. Create designs, spell out words or randomly place stones for a touch of sparkle. Apply with Rhinestone Setter Hot-Fix Applicator-sold separately. 4mm Multi 750pc

Hot Sandy Beaches and cool blue water A hot stylish look with a cool color This adorable Flip Flop Pendant makes a scene with Sparkling Hot Pink crystals paving its charming sole. Perfect for those sizzling summer months

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These iron on sequins add so much sparkle to your projects and are a great compliment to our hot fix rhinestones. They are laser cut and have a holographic effect. Each sequin has a small hole in the center so you can use them for in even more ways! 6MM diameter 5 Gross (720 Sequins) per package.

These beautiful hot fix pearls add dimension and color to your projects. They have rounded tops with a pearl-like finish. Great to add color to so many items. 720 pearls per package. 4mm.