> grundfos pump up15 18 b3

UP15-18B7 Grundfos 1/25 HP Recirculator Pump (59896121)The Grundfos UP15-18B7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS: Flow range: 0 - 15 U.S. GPM Head range: 0 - 14 FEET Motors: 2 Pole, Single Phase, 115 Volt Maximum fluid temperature: 230°F (110°C) Minimum fluid temperature: 36°F (2°C) Maximum working pressure: 145 PSI Connection: Sweat - 3/4"

UP15-18B5 Grundfos 1/25 HP Recirculator Pump (59896114) DescriptionThe Grundfos UP15-18B5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS: Flow range: 0 - 15 U.S. GPM Head range: 0 - 14 FEET Motors: 2 Pole, Single Phase, 115 Volt Maximum fluid temperature: 230°F (110°C) Minimum fluid temperature: 36°F (2°C) Maximum working pressure: 145 PSI Connection: Sweat - 1/2"

The Grundfos UP15-18BUC5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-18BUC5 1/25 HP Recirculator Pump:; Flow range: 0 - 15 GPM; Head range: 0 - 14.5 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: 1/2-inch or 3/4-inch sweat; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-18BUC5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-18BUC5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-18BUC5 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

The Grundfos UP15-42B5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-42B5 1/25 HP Recirculator Pump:; Flow range: 0 - 18 U.S. GPM; Head range: 0 - 15.5 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 1/2"CONSTRUCTION - Grundfos UP15-42B5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-42B5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-42B5 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.* 230 volt version may be available upon request.

The Grundfos UP15-10B7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-10B7 1/25 HP Recirculator Pump:; Flow range: 0 - 9 U.S. GPM; Head range: 0 - 6 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 220;F (104;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 3/4"CONSTRUCTION - Grundfos UP15-10B7 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-10B7 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-10B7 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

The Grundfos UP15-42BUC7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-42BUC7 1/25 HP Recirculator Pump:; Flow range: 0 - 16.5 U.S. GPM; Head range: 0 - 15 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 205;F (96;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 3/4"; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-42BUC7 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

The Grundfos UP15-42BUC5 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Flow range: 0 - 16.5 U.S. GPM; Head range: 0 - 15 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 205;F (96;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 1/2"; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-42BUC5 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

1/25 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. Features:Ceramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Bronze pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA SweatType of connection: Brz. SweatSize, pipe connection: 3/4" SweatPressure stage, pipe connec.: 145 psiPort-to-port length: 6 3/8 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85):

The Grundfos UP15-10BUC7 1/25 HP Recirculator Pump with bronze pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP15-10BUC7 1/25 HP Recirculator Pump:; Flow range: 0 - 9 U.S. GPM; Head range: 0 - 6 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Sweat - 3/4"; BUC = Bronze, Union Connection, Check ValveCONSTRUCTION - Grundfos UP15-10BUC7 1/25 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP15-10BUC7 1/25 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP15-10BUC7 1/25 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.

1/25 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid. Features:Ceramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Bronze pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA SweatType of connection: Brz. SweatSize, pipe connection: 3/4" SweatPressure stage, pipe connec.: 145 psiPort-to-port length: 6 3/8 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85):

UP15-29SF Grundfos 1/25 HP Stainless Steel Circulator Pump (59896771) Features:Quick connect terminals-for easy installationRemov able check valve-no need for an in-line flow checkStainless steel-for corrosive and oxygen bearing fluidsPatentend electronic starting unit-highest starting in its classCeramic bearing-years of quiet, trouble-free operationSpecific ations:Flow range: 0-20.5 U.S. gpm Head range: 0-9.7 feet Motors: 2-pole, single-phase Max. liquid temperature: 230 °F (110 °C) and 150 °F for UP 15-29SU/TLC Min. liquid temperature: 36 °F (2 °C) Max. system pressure: 145 psi Open system Note: If the UP pump is equipped with a timer, the maximum liquid temperature is 150 °F (66 °C).

Grundfos UP10-16B5/ATLC Comfort Series 1/33 HP Recirculator Pump with Sweat Connection includes timer, aquastat, and line cord. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP10-16B5/ATLC Comfort Series 1/33 HP Recirculator Pump with Sweat Connection:; Flow range: 0 - 2.5 GPM; Head range: 0 - 5 FEET; Motors: Single Phase, 115V; Maximum fluid temperature: 203;F (95;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Electrical Connection: The pump is fitted with 5 foot cord and 115V plug; Motor Protection: Impedance- protected. No external motor protection required; Connection: 1/2" Copper Pipe, Female sweat fittings; ATLC = Aquastat, Timer, Line CordCONSTRUCTION - Grundfos UP10-16B5/ATLC Comfort Series 1/33 HP Recirculator Pump with Sweat Connection:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP10-16B5/ATLC Comfort Series 1/33 HP Recirculator Pump with Sweat Connection:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1The water-conduction part of the pump is hermetically separated from the stator with a stainless steel spherical separator. The motor can be separated from the pump housing, enabling easy maintenance and replacement. UP10-16 is supplied with insulating shells. APPLICATIONS - Grundfos UP10-16B5/ATLC Comfort Series 1/33 HP Recirculator Pump with Sweat Connection:; Domestic hot water recirculation systems in single and two-family houses;

115V Single Phase Motor Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Bronze pump housing.The motor is a 1-phase motor.No additional motor protection is required. Liquid:Liquid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA SweatType of connection: Brz. SweatSize, pipe connection: 1/2" SweatPressure stage, pipe connec.: 145 psiPort-to-port length: 5 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

UP15-10B5 Grundfos 1/25 HP Recirculator Pump (59896213) Features Includes: Open SystemBronze1/2" Sweat End ConnectionCorrosi on-Resistant Wet Rotor design, Circulation pumpBuilt-in Motor Protection for long lifeWhisper- Quiet operation for sound sensitive InstallationsComp osite Impeller Eliminates and Prevents Corrosive effects of fresh WaterLow Energy Consumption Wide RangeEasy to Install (less than 1 hour) and Maintenance- FreeImproved Performance and EfficiencyPre- program usage times designed to Save PowerNo additional Wiring RequiredTechnical Specifications: Model Number: UP15-10B5Horse Power: 1/25 HPVoltage: 115VWattage: 25WAmperage: 0.22AHertz: 60HzFlow range: 0 - 9 U.S. GPMHead range: 0 - 6 Ft. Motors: 2 Pole, Single PhaseMaximum fluid Temperature: 220°F (104°C)Minimum fluid Temperature: 36°F (2°C)Maximum working Pressure: 145 PSICapacitor: 2mF/400VConnectio n Type and Size: 1/2" Sweat Free Ground Shipping

115V Single Phase Motor Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Bronze pump housing.The motor is a 1-phase motor.No additional motor protection is required. Liquid:Liquid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA SweatType of connection: Brz. SweatSize, pipe connection: 1/2" SweatPressure stage, pipe connec.: 145 psiPort-to-port length: 5 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

UP15-29SF Grundfos 1/25 HP Stainless Steel Circulator Pump (59896771) Features:Quick connect terminals-for easy installationRemov able check valve-no need for an in-line flow checkStainless steel-for corrosive and oxygen bearing fluidsPatentend electronic starting unit-highest starting in its classCeramic bearing-years of quiet, trouble-free operationSpecific ations:Flow range: 0-20.5 U.S. gpm Head range: 0-9.7 feet Motors: 2-pole, single-phase Max. liquid temperature: 230 °F (110 °C) and 150 °F for UP 15-29SU/TLC Min. liquid temperature: 36 °F (2 °C) Max. system pressure: 145 psi Open system Note: If the UP pump is equipped with a timer, the maximum liquid temperature is 150 °F (66 °C).

UP15-29SU Grundfos 1/25 HP Stainless Steel Circulator Pump (59896775) Features:Quick connect terminals-for easy installationRemov able check valve-no need for an in-line flow checkStainless steel-for corrosive and oxygen bearing fluidsPatentend electronic starting unit-highest starting in its classCeramic bearing-years of quiet, trouble-free operationSpecific ations:Flow range: 0-20.5 U.S. gpm Head range: 0-9.7 feet Motors: 2-pole, single-phase Max. liquid temperature: 230 °F (110 °C) and 150 °F for UP 15-29SU/TLC Min. liquid temperature: 36 °F (2 °C) Max. system pressure: 145 psi Open systemNote: If the UP pump is equipped with a timer, the maximum liquid temperature is 150 °F (66 °C).Flange Model Pictured

UPS32-160 F B 3/4HP 115V BRZ Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Bronze pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA OvalType of connection: FSize, pipe connection: 32Pressure stage, pipe connec.: 145 psiPort-to-port length: 13 1/2" inElectrical data:Power input speed 1: 555 WPower input speed 2: 600 WMax. power input: 625 WMains frequency: 60 HzRated voltage: 1 x 115 VCurrent in speed 1: 5.5 ACurrent in speed 2:

UP15-10SU7P/TLC Grundfos Comfort Series 1/25 HP Recirculator Pump (595916)The Comfort valve is installed at the furthest fixture from the hot-water tank. With a built-in timer, the pump allows hot water to circulate along the loop through the valve using the cold-water side as a return line. As the temperature rises to 100 °F, the valve closes directing hot water to the tap, resulting in a constant availability of hot water.Features:No return line required. Installs in less than one hour.No electricity needed under the sinkBuilt-in timer & line cord.Uses less energy than a 25-watt light bulb.Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listedTechnical Specifications: Model Number: UP15-10SU7P/TLC Horse Power: 1/25Flow range: 0 - 3.4 U.S. GPMHead range: 0 - 3.5 Ft.Motor: Single Phase, 115 VoltsMaximum fluid temperature: 150°F (66°C)Minimum fluid temperature: 36°F (2°C)Maximum working pressure: 145 PSIConnection: Union connect to 3/4" M x 3/4" F NPT Free Ground Shipping

UPS80-160 3HP 208-230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.60 Hz.Wet rotor design.Single stage.Flange-to-fl ange dimensions.Fiber optic operation display.3" suction and discharge.Flow range: 30-127 gpm.Stainless steel constructionNo external bearing lubrication requiredQuiet operation.UL/CSA listed.The motor is a 3-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: ANSIType of connection: FSize, pipe connection: 80<b

UP43-110F 1/6HP 115/230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 230 -FTechnical: Approvals on nameplate: UL,CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Maximum ambient temperature: 104 -FMaximum operating pressure: 124.7 psiStandard, pipe connection: USSize, pipe connection: 43Pressure stage, pipe connec.: 125 psiPort-to-port length: 8 9/16 inElectrical data:Max. power input: 590 WMains frequency: 60 HzRated voltage: 1 x 115 / 230 VMax. current: 5.1 / 2.7 ACos phi : 0,98Capacitor size - run: 60 μF/240 V<b

UPS32-160 F B 3/4HP 115V BRZ Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Bronze pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA OvalType of connection: FSize, pipe connection: 32Pressure stage, pipe connec.: 145 psiPort-to-port length: 13 1/2" inElectrical data:Power input speed 1: 555 WPower input speed 2: 600 WMax. power input: 625 WMains frequency: 60 HzRated voltage: 1 x 115 VCurrent in speed 1: 5.5 ACurrent in speed 2:

UPS32-160 F B 3/4HP 115V BRZ Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Bronze pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Bronze2.1176.01 DIN W.-Nr.Material, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA OvalType of connection: FSize, pipe connection: 32Pressure stage, pipe connec.: 145 psiPort-to-port length: 13 1/2" inElectrical data:Power input speed 1: 555 WPower input speed 2: 600 WMax. power input: 625 WMains frequency: 60 HzRated voltage: 1 x 115 VCurrent in speed 1: 5.5 ACurrent in speed 2:

UP15-10BUC5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord (59896238)The Grundfos UP15-10BUC5/TLC 1/25 HP Recirculator Pump with Timer and Line Cord. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS: Flow range: 0 - 9 U.S. GPMHead range: 0 - 6 FEET Motors: 2 Pole, Single Phase, 115 Volt Maximum fluid temperature: 230°F (110°C) Min. fluid temperature: 36°F (2°C) Maximum working pressure: 145 PSI Connection: Sweat - 1/2" TLC = Timer, Line Cord, 6' foot Free Ground Shipping

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

UPS80-160 3HP 208-230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.60 Hz.Wet rotor design.Single stage.Flange-to-fl ange dimensions.Fiber optic operation display.3" suction and discharge.Flow range: 30-127 gpm.Stainless steel constructionNo external bearing lubrication requiredQuiet operation.UL/CSA listed.The motor is a 3-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: ANSIType of connection: FSize, pipe connection: 80<b

UPS80-160 3HP 208-230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.60 Hz.Wet rotor design.Single stage.Flange-to-fl ange dimensions.Fiber optic operation display.3" suction and discharge.Flow range: 30-127 gpm.Stainless steel constructionNo external bearing lubrication requiredQuiet operation.UL/CSA listed.The motor is a 3-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: ANSIType of connection: FSize, pipe connection: 80<b

UP43-110F 1/6HP 115/230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 230 -FTechnical: Approvals on nameplate: UL,CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Maximum ambient temperature: 104 -FMaximum operating pressure: 124.7 psiStandard, pipe connection: USSize, pipe connection: 43Pressure stage, pipe connec.: 125 psiPort-to-port length: 8 9/16 inElectrical data:Max. power input: 590 WMains frequency: 60 HzRated voltage: 1 x 115 / 230 VMax. current: 5.1 / 2.7 ACos phi : 0,98Capacitor size - run: 60 μF/240 V<b

The Grundfos UP43-44BF 1/6 HP Recirculator Pump with stainless steel pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP43-44BF 1/6 HP Recirculator Pump:; Flow range: 0 - 64 U.S. GPM; Head range: 0 - 13.5 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Flange - (2) 1/2" Diameter Bolt HolesCONSTRUCTION - Grundfos UP43-44BF 1/6 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP43-44BF 1/6 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP43-44BF 1/6 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.* 230 volt version may be available upon request.

The Grundfos UP26-96BF 1/12 HP Recirculator Pump with stainless steel pump housing. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP26-96BF 1/12 HP Recirculator Pump:; Flow range: 0 - 27.5 U.S. GPM; Head range: 0 - 30 FEET; Motors: 2 Pole, Single Phase, 115 Volt; Maximum fluid temperature: 230;F (110;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI ; Connection: Flange - (2) 1/2" Diameter Bolt HolesCONSTRUCTION - Grundfos UP26-96BF 1/12 HP Recirculator Pump:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP26-96BF 1/12 HP Recirculator Pump:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1FEATURES and BENEFITS - Grundfos UP26-96BF 1/12 HP Recirculator Pump:; Bronze and stainless steel construction.; Wet rotor design.; Composite impeller.; Eliminates and prevents corrosive effects of fresh water.; Maintenance- free, low energy consumption, easy to install, quiet running.; Improved performance and efficiency.; Pre-program usage times to save power.; No additional wiring required.; Adds to savings by operating pump by sensing the water temperature with optional timer and aquastat.* 230 volt version may be available upon request.

UP43-110F 1/6HP 115/230V CI Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: without relayLiquid: Liquid temperature range: 14 .. 230 -FTechnical: Approvals on nameplate: UL,CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Maximum ambient temperature: 104 -FMaximum operating pressure: 124.7 psiStandard, pipe connection: USSize, pipe connection: 43Pressure stage, pipe connec.: 125 psiPort-to-port length: 8 9/16 inElectrical data:Max. power input: 590 WMains frequency: 60 HzRated voltage: 1 x 115 / 230 VMax. current: 5.1 / 2.7 ACos phi : 0,98Capacitor size - run: 60 μF/240 V<b

The Grundfos UP10-16BN5/ATLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection includes timer, aquastat, and line cord. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP10-16BN5/ATLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Flow range: 0 - 2.5 GPM; Head range: 0 - 5 FEET; Motors: Single Phase, 115V; Maximum fluid temperature: 203;F (95;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Electrical Connection: The pump is fitted with 5 foot cord and 115V plug; Motor Protection: Impedance- protected. No external motor protection required; Connection: 1/2" FNPT - Female thread fitting; ATLC = Aquastat, Timer, Line CordCONSTRUCTION - Grundfos UP10-16BN5/ATLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos Grundfos UP10-16BN5/ATLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1The water-conduction part of the pump is hermetically separated from the stator with a stainless steel spherical separator. The motor can be separated from the pump housing, enabling easy maintenance and replacement. UP10-16 is supplied with insulating shells. APPLICATIONS - Grundfos UP10-16BN5/ATLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Domestic hot water recirculation systems in single and two-family house

The Grundfos UP10-16BN5/TLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection includes timer and line cord. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP10-16BN5/TLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Flow range: 0 - 2.5 GPM; Head range: 0 - 5 FEET; Motors: Single Phase, 115V; Maximum fluid temperature: 203;F (95;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Electrical Connection: The pump is fitted with 5 foot cord and 115V plug; Motor Protection: Impedance- protected. No external motor protection required; Connection: 1/2" FNPT - Female thread fitting; TLC = Timer, Line CordCONSTRUCTION - Grundfos UP10-16BN5/TLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos Grundfos UP10-16BN5/TLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1The water-conduction part of the pump is hermetically separated from the stator with a stainless steel spherical separator. The motor can be separated from the pump housing, enabling easy maintenance and replacement. UP10-16 is supplied with insulating shells. APPLICATIONS - Grundfos UP10-16BN5/TLC Comfort Series 1/33 HP Recirculator Pump with NPT Connection:; Domestic hot water recirculation systems in single and two-family houses; Small heating systemsPUM

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

1/22 HP 115V Single Phase Canned Rotor Circulator PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.Features:Ce ramic shaft and radial bearings.Carbon axial bearing. Stainless steel rotor can and bearing plate.Corrosion- resistant impeller, Composite, PES.Stainless steel pump housing.The motor is a 1-phase motor.No additional motor protection is required.Liquid:Li quid temperature range: 35.6 .. 230 -FTechnical: Approvals on nameplate: UL, CSAMaterials: Material, pump housing: Stainless steel1.4301 DIN W.-Nr.304 AISIMaterial, impeller: Composite, PESInstallation: Maximum ambient temperature: 104 -FAmb. max at 175- F liquid: 176 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA ThreadedType of connection: S.S. UnionSize, pipe connection: 1 1/4" NPSMPressure stage, pipe connec.: 145 psiPort-to-port length: 5.87 inElectrical data:Max. power input: 85 WMains frequency: 60 HzRated voltage: 1 x 115 VMax. current: 0.74 ACapacitor size - run: 10 μF/180 VInsulation class (IEC 85): F

UPS32-40 1/3HP 115V CI Canned Rotor Circulation PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: with relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA OvalType of connection: FSize, pipe connection: 32Pressure stage, pipe connec.: 145 psiPort-to-port length: 11" inElectrical data:Power input speed 1: 85 WPower input speed 2: 100 WMax. power input: 120 WMains frequency: 60 HzRated voltage: 1 x 115 VCurrent in speed 1: 0.95 ACurrent in speed 2: 1.04 AMax. current: 1.08 ACos phi in speed 1: 0,78Cos phi

Why has hot water recirculation been virtually impossible for existing homes? Traditional hot water recirculation is difficult, if not practically impossible to install in existing homes --- especially homes with finished basements. Companies have responded with clunky under sink units that are cumbersome to install and difficult to find electrical power under bathroom sinks. New Strategy for Existing Homes Grundfos innovation has developed a solution specifically for the existing home market. The Grundfos Comfort System provides a unique and cost effective solution to your hot water recirculation problems! Features: No return line required. Installs in less than one hour. No electricity needed under the sink. Built-in timer & line cord. Uses less energy than a 25-watt light bulb. Can save up to 16,000 gallons of water per year, per household. ANSI/NSF61 and IAPMO listed Electrical Connection Pump is fitted with 10 foot cord and 115V plug. Timer 24 hr, 3 position, 15 minute intervals.

The Grundfos UP10-16BU/ATLC Comfort Series 1/33 HP Recirculator Pump with Union Connection includes timer, aquastat, and line cord. The Grundfos circulator pumps, Series UP, are specifically designed for heating systems. The pumps are also suitable for circulation of hot domestic water and for circulation of liquid in cooling and air-conditioning systems. SPECIFICATIONS - Grundfos UP10-16BU/ATLC Comfort Series 1/33 HP Recirculator Pump with Union Connection:; Flow range: 0 - 2.5 U.S. GPM; Head range: 0 - 5 FEET; Motors: Single Phase, 115V; Maximum fluid temperature: 203;F (95;C); Minimum fluid temperature: 36;F (2;C); Maximum working pressure: 145 PSI; Electrical Connection: The pump is fitted with 5 foot cord and 115V plug; Motor Protection: Impedance- protected. No external motor protection required; Connection: Union - 1-1/4 NPSM; ATLC = Aquastat, Timer, Line CordCONSTRUCTION - Grundfos UP10-16BU/ATLC Comfort Series 1/33 HP Recirculator Pump with Union Connection:; Stator Housing - Aluminum; Spherical Seperator - Stainless Steel; Rotor Can Complete - Stainless Steel/Tungsten Carbide; Rotor, Impeller - Stainless Steel, EPDM, PRO, PFTE, Graphite; Pump Housing - Brass MS 58; Isolation valve - PPO; Stainless Steel; Terminal Box Cover, Motor Cover- Pa66/6; Light - Lexan; Cable, Cable Relief - PVC; Insulating Cover - EPP 55; Orings - EPDM; Check Valve - POMMOTOR - Grundfos UP10-16BU/ATLC Comfort Series 1/33 HP Recirculator Pump with Union Connection:; Insulation class: F; Power consumption: 25W; Voltage: 115V; Phase: 1The water-conduction part of the pump is hermetically separated from the stator with a stainless steel spherical separator. The motor can be separated from the pump housing, enabling easy maintenance and replacement. UP10-16 is supplied with insulating shells. APPLICATIONS - Grundfos UP10-16BU/ATLC Comfort Series 1/33 HP Recirculator Pump with Union Connection:; Domestic hot water recirculation systems in single and two-family houses; Small heatin

UPS32-40 1/3HP 115V CI Canned Rotor Circulation PumpThe pump is of the canned rotor type, i.e. pump and motor form an integral unit without shaft seal and with only two gaskets for sealing. The bearings are lubricatd by the pumped liquid.In order to avoid problems in connection with disposal, great importance has been attached to using as few different materials as possible. Features:Three-spe ed motor.Ceramic radial bearings.Carbon axial bearing. Stainless steel rotor can, bearing plate and rotor cladding. Aluminium alloy stator housing.Cast iron pump housing.Stator with built-in thermal switch.The motor is a 1-phase motor.The pump is supplied with a standard module in the terminal box. The standard module is to be connected to the mains supply via external contactor. Controls:With relay: with relayLiquid: Liquid temperature range: 14 .. 248 -FTechnical: Approvals on nameplate: CULMaterials: Material, pump housing: Cast ironEN-JL1040 DIN W.-Nr.35 B - 40 B ASTMMaterial, impeller: Stainless steel1.4301 DIN W.-Nr.304 AISIInstallation: Range of ambient temperature: 32 .. 104 -FMaximum operating pressure: 145 psiStandard, pipe connection: USA OvalType of connection: FSize, pipe connection: 32Pressure stage, pipe connec.: 145 psiPort-to-port length: 11" inElectrical data:Power input speed 1: 85 WPower input speed 2: 100 WMax. power input: 120 WMains frequency: 60 HzRated voltage: 1 x 115 VCurrent in speed 1: 0.95 ACurrent in speed 2: 1.04 AMax. current: 1.08 ACos phi in speed 1: 0,78Cos phi