> fan speed controller

Control Wizard Products presents... The Speedster motor speed controller. Control the speed of your fans or single speed routers sanders or other power tools. The Speedster Fan/Blower Speed Controller Instructions 1. Before using this speed controller please read the instructions that came with your fan/blower to familiarize yourself with its operation. 2. Verify that the Speed Controller's switch is in the OFF position. Plug the Fan/Blower's electrical cord into the Fan/Speed Controller's outlet. 3. Plug the Fan/Speed Controller's electrical cord into a properly grounded 120 volt AC outlet. *** Note: Any length of grounded extension cord used with this Speed Controller must be rated for 15 Amps. 4. BE SAFE with all electrical equipment. Periodically check the electrical cords connected to the Fan/Blower Speed Controller for signs of overheating. Turn the Fan/Speed Controller OFF and unplug it from its outlet. Then check all electrical connections for corrosion (especially in areas of high humidity) and wire cords for damage. When cords get hot a meltdown or electrical fire could result. 5. Not for use with brush-less capacitor run or magnetic motors. Equipment damage may occur. Safety Warnings and Precautions 1. Observe Work Area Conditions: Do not operate the Fan/Blower Speed Controller in a damp location. Do not expose to rain or snow. Use approved extension cords capable of a 15amp draw. Periodically check the electrical cords connected to the Fan/Blower Speed Controller for signs of overheating. Turn the Fan/Speed Controller OFF and unplug it from its outlet. Then check all electrical connections for corrosion (especially in areas of high humidity) and wire cords for damage. When cords get hot a meltdown or electrical fire could result. 2. Keep children away from work areas. 3. Store the Fan/Blower Speed Controller in a dry location when not in use. 4. Not for use with brush-less or magnetic motors. Equipment damage may occur. Maintenance 1. To clean the Fan/Blower Speed Controller make sure it is unplugged and detached from equipment. Wipe the unit off with a clean damp cloth. Never use chemicals or solvents. 2. If the fuse blows you may be using a fan or blower that uses more current than the Fan/ Blower Speed Controller can deliver. Replace the fuse with a 15amp fuse. 3. Store the fan/Blower speed Controller in a clean and dry location away from insects and pests. Warranty Replacement or Repair Warranty: 90 days for defective parts and materials from date of purchase. Proof of purchase required. Warranty does not cover abuse. Less

Suncourt VS100 Variable Speed Fan Controller - Solid State AC Motor Speed Fan Control. It is designed for mounting in a 2" X 4" electrical wall box. It operates from 115 VAC, 50/60 Hz and has a maximum rating of 2.5 Amps @ 25C. It provides infinitely variable speed motor control for Shaded Pole, Permanent Split Capacitor and Universal (AC/DC) motors. The variable speed motor control contains an on/off line switch, a high gain RFI noise suppression filter, a minimum speed trimpot and a flame retardant ABS enclosure. Applications include range hoods, vibrators, humidifiers, fireplace blowers, fans, laminar flow hoods, heat tunnels and stirrers. includes mounting kit that includes dial plate, knob, mounting screws, wire connectors and instruction sheet. Features: Built-In On/Off AC Line Switch Minimum Speed Trimpot RFI Filter (Provides RFI and EMI Suppression) All Models Mount in a Standard 2 x 4 Electrical Wall Box Specifications: Volts - 115 VAC (50/60 Hz) Maximum Less

5 independant channels with 60W output per each channel Adjust fan speed to Full Speed (12V output, Red LED on), Low Speed (5V output, Blue LED on), or Off 5 x 3-pin connectors to fan, 1 x 4-pin molex connector to power supply Fits any standard 5.25" drive bay (5-7/8" x 1-5/8"), easy installation CNC milled solid aluminium panel of up to 3/4", available in black anodized aluminium or aluminum silver Less

5 independant channels with 60W output per each channel Adjust fan speed to Full Speed (12V output, Red LED on), Low Speed (5V output, Blue LED on), or Off 5 x 3-pin connectors to fan, 1 x 4-pin molex connector to power supply Fits any standard 5.25" drive bay (5-7/8" x 1-5/8") CNC milled solid aluminium panel of up to 3/4", available in black anodized aluminium or aluminum silver Less

Limited Edition Halo 3 Controller included in the release of Halo 3 console bundle Rapid Fire 6 Mode Controller works with COD4, COD5 and COD MW2 LED Indicator light flashes to tell you what mode you are playing with Modded by Professionals guaranteed to work right out of the package Easy to understand instructions, you will be anihilating your competition in no time!!, Platforms: Xbox 360 Less