> dual channel

This deluxe transcutaneous electrical nerve stimulation ( TENS ) electrotherapy has dual isolated channel designed for rehabilitation and physical therapy. Features include chronic, acute and postoperative pain. It comes completely with carrying case, lead wires, 9 volt battery, manual and electrodes.

For chronic, acute and postoperative pain. Designed for rehabilitation and physical therapy. Dual isolated channels. Mode Selector: Constant Intensity control is adjustable from 0-80 mA, 500 load. Pulse frequency adjustable from 2-150 Hz. Pulse width is adjustable from 40-250 micro-seconds. Wave form: asymmetrical, bi-phase, square pulse. Metal belt clip. Comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual. 3 Year Limited Warranty.

Reliamed GM3A50T Dual Channel, Single Mode TENS Unit The Reliamed GM3A50T Dual Channel, Single Mode TENS Unit is a TENS (Transcutaneous Electrical Nerve Stimulator ) traditionally used and designed to manage chronic pain. This TENS Unit works by blocking the pain signal, thereby increasing endorphins in the body. The Reliamed Dual Channel Single Mode TENS Unit can be worn all day or as you need it. The great thing about the Reliamed TENS are features such as an adjustable pulse rate, pulse width, and amplitude (intensity) and the flexibility of electrode placement. You can place the electrodes at the site of your pain or along the nerve channels themselves. Purchase your Reliamed GM3A50T Dual Channel, Single Mode TENS Unit from ActiveForever. Reliamed GM3A50T Dual Channel, Single Mode TENS Unit Features: 120HZ Portable Convenient Lightweight Dual Channel Adjustable Pulse Intensity Cap and Slide Covers Protect Accidental Setting Changes Reliamed GM3A50T Dual Channel, Single Mode TENS Unit Specifications: Included: (1) Hard Plastic Carrying Case (2) Lead Wires (Pigtail-Style) (1) Package of (4) Electrodes (1) 9-Volt Battery (1) Owner's Manual Channel Dual channel, Isolated Between Channels Pulse Intensity Adjustable 0 - 80 mA peak into 500 Ω load each channel, constant current Pulse Rate 2 Hz - 120 Hz (Adjustable) Pulse Width 40 μs - 260 μs (Adjustable) Waveform Asymmetrical, Biphasic, Square Pulse Maximum Charge 21 micro coulombs per pulse Power Source 9 volt battery Size 95 mm (H) x 61.5mm (W) x 26mm (T) Weight Approx. 120grams (battery included) Warranty: 1 Year Warranty Returns: All Reliamed GM3A50T Dual Channel, Single Mode TENS Unit returns are subject to ActiveForever's return policy and a 20% reprocessing fee . Please call Customer Service for a RMA (Return Merchandise Authorization) Number. Unauthorized Returns will not be accepted. Related Searches: Electrical Muscle Stimulation, Sports Therapy

This has dual isolated channels. Pulse amplitude adjustable from 0-80mA, 500ohm load; frequency adjustable from 2-150Hz; width adjustable from 30-260 micro-seconds.

Dual Channel Interferential UnitPulse intensity: Adjustable 0-60mA peak into 500 ohm load each channel, constant currentCarrier Frequency: 4000Hz Fixed (CH1) Modulating Frequency: 4004-4160Hz Adjustable (CH2) Modes: Constant Mode: 4-160bps, Adjustable; Auto Sweep: 80-145 bps, 4-45 bps, 4-Set bps; Frequency Shift: 1/1 abruptly shift, 6/6 abruptly shift, 6/6 ramped, 10/10 abruptly shift, 10/10 rampedSweep Time: 15 secondsFrequency Shift Percentage: Frequency shifts from 30% below set frequency to 60% above and return to 30% below set. Interference Pulse Freq: 4-160 bps, Adjustable 4/bps/stepPulse Duration 125us maximum Wave Form: Symmetrical balanced Sine savePatient Compliance Meter: Shows the treatment timesPatient Lock: Prevents the patient form changing any of the set parameters by the physician/therapi stPower Source: 9 Volt DC Adapter, 500MA or Alkaline 9V battery(9V battery not recommend for its short life)1 Year Manufacturer Warranty Package Includes: Stimulator, Lead Wires, 4 Self-Stick Hypoallergenic Disposable Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet*This item must be ordered by a licensed healthcare professional.

Dual Channel Interferential UnitPulse intensity: Adjustable 0-60mA peak into 500 ohm load each channel, constant currentCarrier Frequency: 4000Hz Fixed (CH1) Modulating Frequency: 4004-4160Hz Adjustable (CH2) Modes: Constant Mode: 4-160bps, Adjustable; Auto Sweep: 80-145 bps, 4-45 bps, 4-Set bps; Frequency Shift: 1/1 abruptly shift, 6/6 abruptly shift, 6/6 ramped, 10/10 abruptly shift, 10/10 rampedSweep Time: 15 secondsFrequency Shift Percentage: Frequency shifts from 30% below set frequency to 60% above and return to 30% below set. Interference Pulse Freq: 4-160 bps, Adjustable 4/bps/stepPulse Duration 125us maximum Wave Form: Symmetrical balanced Sine savePatient Compliance Meter: Shows the treatment timesPatient Lock: Prevents the patient form changing any of the set parameters by the physician/therapi stPower Source: 9 Volt DC Adapter, 500MA or Alkaline 9V battery(9V battery not recommend for its short life)1 Year Manufacturer Warranty Package Includes: Stimulator, Lead Wires, 4 Self-Stick Hypoallergenic Disposable Electrodes, 9V Battery, Hard Plastic Carrying Case, Instruction Booklet*This item must be ordered by a licensed healthcare professional.

ProM-300 Dual Channel Transcutaneous Electrical Nerve plus timer TENS unitWave Form: Asymetrical Bi-Phasic square pulseSystem Includes: StimulatorLead Wires (New FDA compliant)4 Self-stick Hypoallergenic Reusable Electrodes9 Volt BatteryHard Plastic Carrying CaseInstruction BookletChannels: Dual, isolated between channelsWave form: Asmmetrical Bi-Phasic square pulsePulse Amplitude: 0 to 80 mA peak, each channel, adjustable (500 ohm load)Pulse Frequency: 2 TO 150 Hz adjustablePulse width: 40 to 250 microseconds, adjustableMaximum charge: 21 micro coulombs per pulsePower source: 9 volt alkaline battery or similar rechargeable cellBattery life:100 hours average usage (alkaline) at middle range settingSize: 24 x 64 x 91 mmWeight: 130 grams (including battery)All values have 10% +/- toleranceNo returns after use.

Economy Dual Channel Tens The Economy Dual Channel Tens unit is designed for chronic, acute and postoperative pain. Perfect for rehabilitation and physical therapy. The new and improved lead wire connector will not disengage from TENS unit. Tens can help you manage your chronic pain with convenient at home electro therapy on your schedule. Economy Dual Channel Tens Specifications: Dual isolated channels Mode Selector: Constant Adjustable 0-80 MA, 500 ohm load Pulse frequency adjustable 2 -150 Hz Pulse width is adjustable from 40-250 micro-seconds Wave form: asymmetrical, bi-phase, square pulse Metal belt clip Comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual 3 Year Limited Warranty

Drive AGF-602 Dual Channel TENS Unit - Home Health Care If you are looking for a TENS unit, but the high prices of some units have caused you to reconsider, then look no further. The Drive AGF-602 Dual Channel TENS Unit with Timer provides outstanding TENS therapy at a very affordable price. The Drive AGF-602 Dual Channel TENS Unit comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual. Drive AGF-602 Dual Channel TENS Unit Features: Channel: Dual, isolated between channels Pulse Ampulitude: Adjustable, 0-80 mA peak into 500 ohm load each channel Wave Form: Modified square wave with zero net direct current (DC) component Power Supply: One 9V battery (Alkaline or Nickel-Cadmium Rechargable) Battery Life: Approximately 70 hours at average settings. Size: 24(H) x 64(W) x 95(T) mm Weight: 130 grams with battery Pulse Width: Adjustable, from 60 to 250 microseconds. Modulation Mode: Pulse rate is automaticlly varied in a cyclic pattern over an interval of nominally 4.0 seconds. Burst Mode: 7 pulses per burst 2 bursts per second 100 Hz internal frequency of bursts Max. Charge Per Pulse: 20 micro- coulombs Timer: 30 min, 60 min, or constant time Warranty: 3 yr. limited warranty About TENS (Transcutaneous Electrical Nerve Stimulation) therapy: It is a set of electrodes which are placed on the skin on your back and it emits an electrical signal which stimulate your neurons through the skin. (Thus the name.) The sensation is more like the tingling and numbness of your jaw after dental work than like pain. Related Searches: 822383104546

MaxTens 1000 Analog UnitThis fully adjustable TENS unit has a protective cover to guard against accidental setting changes. It features a wide array of output combinations to help get the settings just right. With timers ranging from 15 or 30 minutes to continuous mode, users can pick the setting that's right for them. The pulse rate, pulse width and amplitude are adjustable to lessen acute pains due to an accident or chronic conditions such as arthritis or other joint and muscle conditions. Features:• Electrodes: Scrip Reusable Electrodes 2" x 2", 4/pkg • Channels: Dual, isolated between channels • Dimensions: 1" x 2 3/4" x 4 1/10" • Weight: 4.5 oz (includes battery) • Power: DC 9V square shaped battery • Battery Life: Approximately 50 hours at normal settings • Pulse Amplitude: 0 - 80 mA across 500 Ohm load for each channel • Pulse Rate: 1 - 150 Hz adjustable • Pulse Width: 30 - 260 µs adjustable• Burst Mode: Bursts occur twice every second. Pulse width (adjustable), frequency = 100 Hz • Modulation Mode: Automatically varied in a cyclic pattern over an interval of nominally 10 seconds (in max 150 Hz). Pulse rate decreases linearly over a period of 4 seconds from the control setting value to a value which is 40% less. The lower pulse rate will continue for 1 second then increase linearly over 4 seconds to its original value. The original pulse rate will continue for 1 second then the cycle is repeated. • Wave Form: Asymmetric Bi-Phasic Square Pulse • Timer: 15, 30 minutes, continuous • Voltage: 0 to 40 Volt (Load : 500 ohm) Warranty: • 1 year on unit*This item must be ordered by a licensed healthcare professional.

MaxTens 1000 Analog UnitThis fully adjustable TENS unit has a protective cover to guard against accidental setting changes. It features a wide array of output combinations to help get the settings just right. With timers ranging from 15 or 30 minutes to continuous mode, users can pick the setting that's right for them. The pulse rate, pulse width and amplitude are adjustable to lessen acute pains due to an accident or chronic conditions such as arthritis or other joint and muscle conditions. Features:• Electrodes: Scrip Reusable Electrodes 2" x 2", 4/pkg • Channels: Dual, isolated between channels • Dimensions: 1" x 2 3/4" x 4 1/10" • Weight: 4.5 oz (includes battery) • Power: DC 9V square shaped battery • Battery Life: Approximately 50 hours at normal settings • Pulse Amplitude: 0 - 80 mA across 500 Ohm load for each channel • Pulse Rate: 1 - 150 Hz adjustable • Pulse Width: 30 - 260 µs adjustable• Burst Mode: Bursts occur twice every second. Pulse width (adjustable), frequency = 100 Hz • Modulation Mode: Automatically varied in a cyclic pattern over an interval of nominally 10 seconds (in max 150 Hz). Pulse rate decreases linearly over a period of 4 seconds from the control setting value to a value which is 40% less. The lower pulse rate will continue for 1 second then increase linearly over 4 seconds to its original value. The original pulse rate will continue for 1 second then the cycle is repeated. • Wave Form: Asymmetric Bi-Phasic Square Pulse • Timer: 15, 30 minutes, continuous • Voltage: 0 to 40 Volt (Load : 500 ohm) Warranty: • 1 year on unit*This item must be ordered by a licensed healthcare professional.

MaxTens 2000 Digital UnitThis fully adjustable TENS unit has a protective cover to guard against accidental setting changes. It features a wide array of output combinations to help get the settings just right. With timers ranging from 15 minutes to continuous mode, users can pick the setting that's right for them. The pulse rate, pulse width and amplitude are adjustable to lessen acute pains due to an accident or chronic conditions such as arthritis or other joint and muscle conditions. Features:• Electrodes: Scrip Reusable Electrodes 2" x 2", 4/pkg • Channels: Dual, isolated between channels • Dimensions: 1" x 2 3/4" x 4 1/10" • Weight: 4.3 oz (includes battery) • Power: DC 9V square shaped battery • Battery Life: Approximately 30 hours at normal settings • Pulse Amplitude: 0 - 80 mA across 500 Ohm load• Pulse Rate: 1 - 150 Hz adjustable • Pulse Width: 50 - 250 µs adjustable • Wave Form: Symmetrical Bi-Phasic Rectangular, Monophasic Square Pulse• Modes: Constant, Burst, Modulation• Burst Mode: Bursts occur twice every second, pulse width (adjustable), frequency = 100 Hz• Modulation Mode: Pulse width modulation from 100 µs to 250 µs within 6 seconds and then back to 100 µs in the next 6 seconds, pulse rate is selectable• Timer: 15, 30, 45, 60, 90 minutes, continuous • Voltage: 0 to 40 Volt (Load : 500 ohm) • LCD Monitoring Warranty: • 1 year on unit*This item must be ordered by a licensed healthcare professional.

Dual Watch Scan Specifications General Number of Features All: U.S.A., Canadian, International 10 NOAA Weather Channels Channel Spacing 25 kHz Modulation 5 kHz Max. Input Voltage 13.8 VDC Current Drain: Stand-by Receive Transmit 200 mA 300 mA 5 A @ High Power 1 A @ Low Power Temperature Range -20C to 60C Unit Dimensions 6.25" x 2.25" x 7.125" (159mm x 57mm x 180mm) Unit Weight (Lbs) 2 lbs., 6.8 oz. (1100g) Receiver Frequency Range 156.050 to 163.275 MHz Receiver Type Double Conversion Super-Heterodyne Sensitivity: 20 dB Quieting 12 dB Sinad 0.35uV 0.30 uV Adjacent Channel Selectivity -60 dB Intermodulation and Rejection -60 dB Spurious & Image Rejection -60 dB AF Output 4 Watts @ 8 Ohms Transmiter Frequency Range 156.025 to 157.425 MHz RF Output Power 1 or 25 Watts Spurious Emissions -60 dB @ High Power -55 dB @ Low Power Microphone Type Electret Microphone Impedance 2000 Ohms Frequency Stability +/- 10 ppm FM Hum & Noise 40 dB Features Benefits 1 or 25 Watts Dual output power for short and long communication. U.S.A., Canada & International Channels Allows operation on any of the three (3) different channel maps established for these areas. 10 NOAA Weather Channels Instant access to national all hazards and weather information, 24 hours a day. Weather Alert Alerts with an audible tone and visual alarm if threatening weather is nearby. Instant Channel 16/9 Instant access to channel 16 and channel 9 for emergency situations. DSC (Digital Selective Calling) Meets internationally recognized requirements for RTCM- SC-101 Digital Selective Calling that allows you to send a distress signal at the touch of a button or exchange position information with other boats or stations. GPS Capability When connected to a Cobra or most other GPS receivers, you can send your position to other boats in an emergency, or exchange position information with other boats or stations. Dual Watch Scan Scan all channels to find conversations in progress. Signal Strength Meter Shows the strength of incoming signal. 3 Year Warranty (on radio) For products sold in the U.S.A. Illuminated Function Keys Allows high visibility of function keys. Illuminated LCD Display: Large Allows high visibility of display. Noise Canceling Microphone with Controls Blocks background noise. Controls allow instant access to channels 16 & 9 and changing of channels & setting features. External Speaker Jack Allows connection of an external speaker (not included). Submersible Meets JIS7 standards; Submersible for 30 minutes in one meter deep water. Accessories Included Flush Mount Kit & Surface Mount Kit Easy installation of radio in or on almost any flat surface with supplied hardware. GPS Interface Cable Allows connection of a GPS receiver

The BlueTube DP two-channel microphone/instru ment preamplifier with Dual Path technology delivers the best of both worlds offering a solid state preamplifier stage and a tube preamplifier stage in each channel. Dual Path delivers the most flexible preamplifier in its price range by delivering both fat warm tube tone and solid state transparency. Each channel of the BlueTube DP includes a -20dB PAD, polarity reverse, 80Hz LPF, and +48V phantom power. Front panel controls include solid state gain control and switchable tube drive. It is the perfect front-end preamplifier for any project studio delivering a wide range of sounds and tonality all at an amazingly affordable price.

Dual Channel Tens The Dual Channel Tens basic unit can help you manage your chronic pain with convenient at home electro therapy on your schedule. Electrodes are placed on the skin, either directly over the painful area or more commonly, at key points along the nerve pathway. A small, battery-powered generator emits a milli-amp (one thousandth of an ampere) of electricity through lead wires to the electrodes. One of the most common reasons for TENS use for pain relief is that this therapy has few side effects. TENS is non-addictive, causes no drowsiness, and can be used indefinitely without the problems associated with prolonged drug use. The most common side effect reported has been skin irritation at the site of the electrode, due to either a sensitivity to the gels and adhesives used, or from burns, caused by extended stimulation. TENS should be used with caution by cardiac pacemaker recipients. Talk to your doctor before starting any pain management therapy. Dual Channel Tens Spe

Deluxe Dual Channel Tens, Horizontal Design The Deluxe Dual Channel Tens units' horizontal design provides an improved ergonomic fit on belt. The new and improved lead wire connector will not disengage from TENS unit. Includes an easy and convenient Flip Down control panel and battery cover to reduce cover loss or damage. Deluxe Tens Unit Specifications: Dual isolated channels Adjustable 0-80 MA, 500 ohm load Pulse frequency adjustable 2 -150 Hz Pulse width is adjustable from 60-250 micro-seconds Wave form: asymmetrical, bi-phase, square pulse Modulation selector offers wave delivery in Normal, Burst or Modulation modes Plastic belt clip Comes complete with carrying case, 2 lead wires with deluxe connector, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual 3 Year Limited Warranty

The ProM-500 with EMS features: Dual Channel * Pulse Width 250 Microseconds * Pulse Rate Adjustable 2Hz-120 Hz * On Ramp Adjustable 0-8 seconds * Intensity Amplitude Adjustable 0-100 mA each channel Cycle on Time Control 1-30 seconds Cycle Off Time Control 0-30 seconds Synchronous, Constant and Alternation are adjustable. This Package Includes: Stimulator Lead Wires (New FDA compliant) 4 Self-stick Hypoallergenic Reusable Electrodes 9 Volt Battery Hard Plastic Carrying Case Instruction Booklet.

Traceable Dual Probes Ideal for measuring temperatures in petroleum products or wastewater and for detecting temperature variations in incubators, ovens, and baths. Thermometer senses the changes between inlet and outlet temperatures in any system setup. Supplied with two immediate- response Type-K thermocouple probes that show temperature changes in less than a second. The 1.9cm (3/4") display shows either probe temperature or the difference in temperature between probes. Readable from 4.5m (15') away. Hold switch allows display to capture readings. Rugged case is chemical- and shock-resistant ABS plastic with a handy flip-open bench stand for easy monitoring. Uses all Type-K thermocouple probes. All Type-K probes may be used with liquids, air/gas, and semi-solids. Stainless steel probe has a 22.9cm (9") stem with a 3mm (1/8") diameter and a 102cm (401/8") cable. Beaded probe is 1.5mm (1/16") in diameter and features a 1.2m (4') fluoropolymer resin cable. The low-temperature stainless steel probe has a diameter of 4.3mm (3/16") and features a 30.5cm (12") stem with a 12.7cm (5") handle. Low-temperature probe is supplied with a 2.4m (8') expandable cable. A serial numbered certificate is provided from an ISO 17025 calibration laboratory accredited by A2LA to indicate thermometer traceability to standards provided by the National Institute of Standards and Technology. Resolution: 0.1 degrees under 200 degrees C (392 degrees F); 1.0 degrees above 200 degrees C (392 degrees F) Ordering Information: Supplied with two fast-response Type-K beaded probes (61161-372) and a 9V battery.

Note: For sale to healthcare professionsals only. Features: For chronic, acute and postoperative pain. Designed for rehabilitation and physical therapy. Dual isolated channels. Mode Selector: Constant intensity control is adjustable from 0-80 mA, 500 load. Pulse frequency adjustable from 2-150 Hz. Pulse width is adjustable from 40-250 micro-seconds. Wave form: asymmetrical, bi-phase, square pulse. Metal belt clip. Comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual. 3 Year Limited Warranty. AGF-3E

Stimulator features:Dual-chan nel, four-pad stimulatorDual- intensity controlsPolarity controlBipolar application (no dispersive pad)Selectable frequency, pulse width, Òon/offÓ surge durationSurge and reciprocal modes rampedIntensity reset circuitPatient treatment stop switchUltrasound features: Lightweight, standard transducerCable fault alarm systemTransducer protection switchAdjustable interrupted output mode0 - 20 watt output30-minute timer

Schatten Design has just released a new and upgraded Artist II model endpin jack preamp. This is the same preamp that is now supplied with their HFN series of guitar pickups, RG-03-A resonator pickup, and TC-A tricone pickup, and is now available separately for use with existing passive pickup systems. External Power Options The Artist II preamp is now capable of running from virtually any power source. It can be run from a 9 volt battery onboard the instrument or by any outboard power source between 11 and 48 volts such as Phantom Power as provided by a mixer, PA system, amp or outboard battery pack. This multi power capability is not just an option, it comes as a standard feature. The Artist II preamp is an excellent choice for resonator guitars, archtop guitars and other instruments that have limited access to the inside of the instrument. Since the Artist II can be powered from an external source, there is no need to install a battery inside the instrument. A special cable (part #CAB-1) is required to run from either phantom power or battery pack. Dual Channel Support The Artist II preamp has two separate channels. Each channel has an adjustable gain control from 0 db to 24 db to allow presetting of the balance between the two channels. You can use Schatten pickups for one or both channels, and this preamp also will match up well with virtually any other piezo crystal pickup from any manufacturer and as such is a good replacement preamp for other brands as well. Artist II Options Soundhole mounted thumbwheel volume control (Artist II Plus 1) Dual thumbwheel volume controls (Artist II Plus 2) CAB-1 cable - allows you to run from outboard power sources RP-1 remote power module (18 volts) allows you to run from an outboard power source when mixer/PA/amp Phantom Power is not available (requires CAB-1 cable) Specifications Power: 9 volts Input Impedance: 10 M ohms Output Impedance: 5 k ohms

The Micro II features: Dual Channels, Frequency 0.5, 8 and 80Hz, Modified Square DC Biphasic, Pulses of 0.5Hz, 8Hz and 80Hz changing polarity at interval of 1 second, Timer 10, 20, 40 minutes. The package includes: Stimulator, Lead Wires (New FDA compliant), 4 Self-stick Hypoallergenic Reusable Electrodes, 9 Volt Battery, Hard Plastic Carrying case, Instruction Booklet.

dual isolated channels. pulse amplitude adjustable from 0-80 ma 500 ohm load. pulse frequency adjustable from 2-150 hz. pulse width is adjustable from 30-260 micro-seconds. wave form: asymmetrical bi-phase square pulse. modulation selector offers wave delivery in normal burst or modulation modes. plastic belt clip. comes complete with carrying case 2 lead wires 9-volt battery 1 package of 4 pre-gelled electrodes and operating manual. 3 year limited warranty

Dual isolated channels. Pulse frequency adjustable from 2-150 Hz. Pulse width is adjustable from 30-260 micro-seconds. Wave form: asymmetrical, bi-phase, square pulse. Modulation selector offers wave delivery in Normal, Burst or Modulation modes. Plastic belt clip. Comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual. 3 Year Limited Warranty.

Authorized Hobby Dealer Visit My eBay Store Search Tom's RC in titles descriptions another great buy-it-now from Tom Brand New NIP 72 MHz Aircraft Band Dual Conversion Receiver Crystal Package Content: (1) Dual Conversion Receiver Crystal (72 MHz) (2) Frequency Number Sticker Your Choice of Channel 11 ~ 60 Compatibility List This is a Replacement Receiver Crystal for all Dual Conversion FM and PCM Hitec Receivers RC Aircraft Frequencies Channel Frequency (MHz) 11 72.010 12 72.030 13 72.050 14

Dual isolated channels. Pulse amplitude adjustable from 0-80 mA, 500 ohm load. Pulse frequency adjustable from 2-150 Hz. Pulse width is adjustable from 30-260 micro-seconds. Wave form: asymmetrical, bi-phase, square pulse. Modulation selector offers wave delivery in Normal, Burst or Modulation modes. Plastic belt clip. Comes complete with carrying case, 2 lead wires, 9-volt battery, 1 package of 4 pre-gelled electrodes and operating manual. 3 Year Limited Warranty.

Schatten Design has just released a new and upgraded Artist II model endpin jack preamp. This is the same preamp that is now supplied with their HFN series of guitar pickups, RG-03-A resonator pickup, and TC-A tricone pickup, and is now available separately for use with existing passive pickup systems. External Power Options The Artist II preamp is now capable of running from virtually any power source. It can be run from a 9 volt battery onboard the instrument or by any outboard power source between 11 and 48 volts such as Phantom Power as provided by a mixer, PA system, amp or outboard battery pack. This multi power capability is not just an option, it comes as a standard feature. The Artist II preamp is an excellent choice for resonator guitars, archtop guitars and other instruments that have limited access to the inside of the instrument. Since the Artist II can be powered from an external source, there is no need to install a battery inside the instrument. A special cable (part #CAB-1) is required to run from either phantom power or battery pack. Dual Channel Support The Artist II preamp has two separate channels. Each channel has an adjustable gain control from 0 db to 24 db to allow presetting of the balance between the two channels. You can use Schatten pickups for one or both channels, and this preamp also will match up well with virtually any other piezo crystal pickup from any manufacturer and as such is a good replacement preamp for other brands as well. Artist II Options Soundhole mounted thumbwheel volume control (Artist II Plus 1) Dual thumbwheel volume controls (Artist II Plus 2) CAB-1 cable - allows you to run from outboard power sources RP-1 remote power module (18 volts) allows you to run from an outboard power source when mixer/PA/amp Phantom Power is not available (requires CAB-1 cable) Specifications Power: 9 volts Input Impedance: 10 M ohms Output Impedance: 5 k ohms

1 or 25 watt dual output power for short and long communication 10 noaa weather channels allows access to national weather information 24 hours weather alert alerts you of a weather emergency signal dsc (digital selective calling) meets internationally recognized requirements for rtcm-sc-101 digital selective calling that allows you to send a distress signal or exchange position information with other boats gps capability when connected to a cobra or most other gps receivers you can send your position to other boats on an emergency or just to direct a buddy to where the fish are biting instant channel 16/9 provides instant access to channel 16 and 9 for emergency situations submersible - meets jis7 standards; submersible for 30 minutes in 1 meter deep water super large illuminated lcd see radio settings from practically anywhere with the largest lcd on a fixed radio illuminated function keys allows high visibility of function keys controls on microphone allows the changing channels and instant access to channels 16 and 9 speaker microphone with volume control allows listening to radio signals on the microphone tri watch allows monitoring of working channel priority channel and weather channel scan all channels memory scan for channels programmed into memory signal strength meter shows the strength of out going and incoming signals public address capability allows calling other boats over a pa speaker external speaker jack allows connection of an external speaker flush mount and surface mount kit included for easy installation of radio in or on almost any surface gps interface cable included for connection of a gps receiver 3 year parts and labour warranty

The EMS 5.0 Electronic Muscle Stimulator provides a proven, efficient way of treating muscle injuries by the transmission of electronic pulses that causes passive exercise. The stimulation, contraction and relaxation cycle of Electronic Muscle Stimulator loosens muscle fibers, increases blood flow and stimulates muscle growth. Ideal for treating back and neck pain, sore muscles and more! EMS 5.0 Electronic Muscle Stimulator Features: Channel: Dual, isolated between channels Intensity Control: Adjustable, 0-80 mA peak into 500 ohm load each channel Wave Form: Asymmetrical Bi-Phase Square Pulse Voltage: 0 to 40 V Power Supply: One 9V battery Size: 95(H) x 65(W) x 23.5(T) mm Weight: 115 grams with battery Pulse Rate: 5, 30, 100 Hz Pulse Width: Fixed 250uS Contraction Time: Adjustable from 1-30 seconds Relaxation Time: Adjustable from 1-45 seconds Ramp Time: 1, 3, or 5 seconds Max Charge per pulse: 20 micro-coulombs Battery Life: Approximately 25 hours at nominal settings. Includes four pre-gelled electrode pads

Schatten Design has just released a new and upgraded Artist II model endpin jack preamp. This is the same preamp that is now supplied with their HFN series of guitar pickups, RG-03-A resonator pickup, and TC-A tricone pickup, and is now available separately for use with existing passive pickup systems. External Power Options The Artist II preamp is now capable of running from virtually any power source. It can be run from a 9 volt battery onboard the instrument or by any outboard power source between 11 and 48 volts such as Phantom Power as provided by a mixer, PA system, amp or outboard battery pack. This multi power capability is not just an option, it comes as a standard feature. The Artist II preamp is an excellent choice for resonator guitars, archtop guitars and other instruments that have limited access to the inside of the instrument. Since the Artist II can be powered from an external source, there is no need to install a battery inside the instrument. A special cable (part #CAB-1) is required to run from either phantom power or battery pack. Dual Channel Support The Artist II preamp has two separate channels. Each channel has an adjustable gain control from 0 db to 24 db to allow presetting of the balance between the two channels. You can use Schatten pickups for one or both channels, and this preamp also will match up well with virtually any other piezo crystal pickup from any manufacturer and as such is a good replacement preamp for other brands as well. Artist II Options Soundhole mounted thumbwheel volume control (Artist II Plus 1) Dual thumbwheel volume controls (Artist II Plus 2) CAB-1 cable - allows you to run from outboard power sources RP-1 remote power module (18 volts) allows you to run from an outboard power source when mixer/PA/amp Phantom Power is not available (requires CAB-1 cable) Specifications Power: 9 volts Input Impedance: 10 M ohms Output Impedance: 5 k ohms