> catalyst 4500 module

Cisco Catalyst 6500 Switch Fabric Module, WS-C6500-SFM The Switch Fabric Module (SFM) for the Catalyst 6500 series switches delivers an increase in available system bandwidth from the existing 32- to 256-Gbps. The Switch Fabric Module enables a new architecture that allows 30 Mpps of Cisco Express Forwarding (CEF)-based central forwarding performance on Supervisor Engine 2 and over 100 Mpps via distributed forwarding on line cards. The higher bandwidth and performance enabled by the Switch Fabric Module coupled with advanced services such as Quality of Service (QoS) and security in hardware via access control lists (ACLs) make Catalyst 6500 series the premier platform for both service providers as well as Enterprises. Note: The Switch Fabric Module requires a Supervisor Engine 2 and must be installed in slot 5 or slot 6 of the Catalyst 6506, Catalyst 6509, or Catalyst 6509-NEB switches. The Switch Fabric Module cannot be installed in the Catalyst 6513 switch or the Catalyst 6503 switch. Form Factor: Plug-in module Dimensions (WxDxH): 39.1 cm x 42.7 cm x 4.5 cm Data Transfer Rate: 256 Gbps Features: Layer 3 switching, Layer 2 switching Condition: Pre-owned in good condition Warranty: 1 Year We carry a full line of accessories for Cisco equipment. If you do not see what you need in our store please contact us .

Cisco Catalyst 6000 Series 8-Port GBIC Expansion Module The Catalyst 6000 family eight-port Gigabit Ethernet module can be configured with any combination of short-wave (SX) and long wave/long haul (LX/LH) Gigabit Interface Converters (GBICs). Cisco Catalyst 6000 series mixed media/fiber- based gigabit Ethernet interface modules are used in distribution and core layers, and in data-center applications. These gigabit Ethernet interface modules deliver wire-speed switched connectivity and support several switch fabric connections and traffic forwarding options. Device type-Cisco expansion module Features- Full duplex capability Expansion Slots Total- 8 x GBIC Compatible Slots- 1 x Expansion Slot Compliant Standards- CE, FCC Class A certified, VCCI, EN 60950, EN55022, UL 1950, IEC 825-1/EN 60825-1 class 1, IEC 60950, EN55024, CSA 22.2 No. 950, CISPR 22, AS/NZ 3548 Class B, AS/NZS 3260 Condition: Pre-owned in good condition Warranty : 1 Year

The Cisco Catalyst 4500 Series Supervisor Engine V-10GE continues the nonblocking robust Layer 2-4 switching found in previous Cisco Catalyst 4500 Series supervisor engines with the addition of wire-speed 10-Gigabit Ethernet uplinks 136-Gbps capacity and 102-mpps throughput and additional features to further enhance resilient control of converged data voice and video networks with high availability to help enable business resiliency for enterprise and metropolitan (metro) Ethernet customers. Network control extends from the backbone to the edge with intelligent services such as granular quality of service (QoS) Internet security and network management.The Cisco Catalyst Supervisor Engine V-10GE includes dual wire-speed 10-Gigabit Ethernet ports (X2 optics) as well as 4 alternative wired Gigabit Ethernet ports (Small Form-Factor Pluggable [SFP] optics) on the faceplate to maximize the flexibility of deployment options. The combination of Gigabit Ethernet and 10-Gigabit Ethernet ports on the same supervisor engine allows for network future-proofing with an easy migration path from Gigabit Ethernet to 10 Gigabit Ethernet by simply adding 10-Gigabit Ethernet optical interfaces. The ability to choose between Gigabit Ethernet uplinks and 10-Gigabit Ethernet uplinks on a single supervisor engine further enhances the investment protection of the Cisco Catalyst 4500 Series architecture.The Cisco Catalyst 4500 Supervisor Engine V-10GE offers port scalability for resilient Layer 2-4 and routing for both enterprise and service provider market segments. Optimized for the enterprise LAN branch-office backbones or Layer 3 distribution points this supervisor engine provides the performance and scalability to handle the network applications of today and the future. The Cisco Catalyst 4500 Series modular architecture provides a pay-as-you-grow model reducing operational expenses and capital expenditures. The Supervisor Engine V-10GE is backward- compatible with all current Cisco Catalyst 4500 Series line cards and can be used with the Cisco Catalyst 4503 Catalyst 4506 Catalyst 4507R and Catalyst 4510R chassis.

The Cisco Catalyst 6500 Series Wireless Services Module (WiSM) provides unparalleled security mobility redundancy and ease of use for business- critical wireless LANs (WLANs). It delivers the most secure wireless system available for enterprise-scale WLANs. As a Cisco Catalyst 6500 Series module it delivers centralized security policies wireless intrusion prevention system (IPS) capabilities award-winning RF management quality of service (QoS) and Layer 3 fast secure roaming for WLANs. As a key component of the Cisco Unified Wireless Network the Cisco WiSM provides the control security redundancy and reliability that network managers need to scale and manage their wireless networks as easily as they scale and manage their traditional wired networks.The Cisco WiSM is a member of the Cisco Wireless LAN Controller family. It works in conjunction with Cisco Aironet lightweight access points the Cisco Wireless Control System (WCS) and the Cisco Wireless Location Appliance to support mission-critical wireless data voice and video applications. It provides real-time communication between lightweight access points and other WLAN controllers to deliver a secure and unified wireless solution.The Cisco WiSM smoothly integrates into existing Cisco Catalyst 6500 Series enterprise networks. It communicates using the emerging Lightweight Access Point Protocol (LWAPP) standard to establish secure connectivity between access points and modules across Layer 3 networks. This protocol enables the automation of important WLAN configuration and management functions for cost-effective WLAN operations. With this integrated approach to large-scale wireless networking customers can realize significant total cost of ownership benefits by streamlining support costs and reducing planned and unplanned network downtime.The Cisco WiSM scales to deliver secure enterprise wireless access to main branch and remote campuses. It is designed for medium-sized and large enterprise facilities with clustering capabilities of up to 3600 lightweight access points per roaming domain. It scales to 300 lightweight access points per module with support for 10000+ wireless client devices. For even greater scalability the Cisco WiSM can be deployed in conjunction with other Cisco wireless LAN controllers.

Cisco Catalyst 4000 Series 48 Port 10/100 Inline Power Module The Cisco Catalyst 4000 Inline Power 10/100BASE-TX Ethernet Switching line card supports up to 48 ports per line card (RJ-45 interfaces). Along with phone discovery, these line cards support autosensing and autonegotiation to determine the speed and duplex mode of the attached device. Inline power is 48-VDC power provided over standard Category 5 unshielded twisted-pair (UTP) cable up to 100 meters. Instead of requiring wall power, terminal devices such as IP telephones can utilize power provided from the Cisco Catalyst 4000 Switch. This capability gives the network administrator centralized power control, which translates into greater network availability. By deploying Cisco Catalyst 4000 switches with uninterruptible- power-supply (UPS) systems in secured wiring closets, network administrators can ensure that power outages in a building will not affect network telephony connections. Product Description- Cisco inline power module - 48 ports Form Factor- Plug-in module Ports Qty- (48) 10/100 TX Ethernet Data Transfer Rate- 100 Mbps Data Link Protocol- Ethernet, Fast Ethernet Compatible Slots- 1 x Expansion Slot Compliant Standards- IEEE 802.3, IEEE 802.3u Condition: Pre-owned in good condition