> buy thermo electric cooling systems

System features an extended upper buffer chamber that provides even heat distribution. Chamber brings the buffer into direct contact with the entire gel surface, providing efficient cooling. System requires less than 100mL of buffer per run. Built-in, full length, spring-loaded side clamps attach to a molded gasket to ensure a leakproof seal without the risk of overtightening. System may be used with precast gels, or with gels poured by hand. Gel Size: 10L x 10W cm (315/16 x 315/16") Buffer Volume, Upper Buffer Chamber: 100 mL Lower Buffer Chamber: 50 mL Dimensions: 18.4W x 12.7H x 8.3D cm (71/4 x 5 x 31/4") Ordering Information: Supplied with manufacturer's three-year warranty. Complete system includes an upper and lower buffer chamber; SuperSafe lid with attached power supply leads; one blank glass plate; one notched glass plate; one notched alumina plate; two 10-well, 0.8mm thick combs; and two 0.8mm thick side spacers.

Combing the BootGlove Alpine and Thermo Feet heat reflectors into an intergrated thermal retention system. Easy to install on any alpine boot adding up to 53 degree gain to the shell of the bootFeatures 5 Mil N2s Neoprene outer shell Adjustable Velcro heel and toe strap Side abrasion patches Wind and waterproof 30 day warranty

This agarose gel electrophoresis system is designed to provide flat, even banding patterns and consistent results with hassle-free gel casting. No tape, grease, agarose seals, or other accessories are required. One gel tray (51 samples) or two stacked gel trays (102 samples) can be run in the buffer chamber while saving valuable bench space. Each of the two U.V. Transmissible (UVT) gel trays, measuring 16Wx17Lcm (65/16x611/16"), accommodates up to three combs, allowing the user to run up to three series of samples of equal distances. A stand-alone casting platform is included for casting two gels simultaneously. A single gel can be cast right in the buffer chamber. Running Buffer Volume: 1.8 L Footprint Dimensions: 27W x 23L x 14H cm (105/8 x 9 x 51/2") Ordering Information: The complete system consists of a buffer chamber with three-point leveling base; SuperSafe lid with attached power supply leads; two UVT gel trays; two 1.5mm thick combs; external gel caster; and casting tray.

This system is ideal for teaching laboratories or for any laboratory that requires the ability to run multiple gels simultaneously. With this system, one teacher can instruct up to 12 students with only one power supply. This versatile system can run up to six 7Wx8Lcm (23/4x31/8") mini gels at one time. When used with double-sided combs, the system can screen up to 144 samples at once. The EasyCast casting design allows for the casting of gels without tape or plugs. U.V. transmissible (UVT) gel trays may be placed directly on the transilluminator for photo documentation. Running Buffer Volume: 2.3 L Footprint Dimensions: 28W x 37.5L x 10H cm (11 x 143/4 x 315/16") Ordering Information: The complete system includes a buffer chamber with three-point leveling base; a SuperSafe lid with attached power supply leads; six EasyCast UVT gasketed gel trays; twelve 10-well 1-1.5mm thick double-sided combs; two external multiple gel casters; and a gel tray holder.

This compact unit occupies only 11.4x16.5cm (41/2x61/2") of bench space. The digital system features a built-in temperature display, microprocessor- controlled temperature ramping, and rapid fan cooling. Glass capillaries with an outside diameter of 1.5-1.85mm (1/20-1/14") and length of 100mm (4") allow simultaneous determination of three samples. High-tolerance capillary holes and special precision capillaries result in more sharply defined melting range determinations. Precision- machined, aluminum construction provides a uniform block for reduced temperature gradients, eliminating the hazards and mess associated with oil baths. Temporary memory can store and recall two values for later use. Temperature is sensed by a platinum RTD. Temperature display is easily calibrated without tools, using a melting point standard. A high-speed fan quickly cools the unit back to a selected temperature. Audio-visual alarm indicates when oven temperature is stable. Sample observation is enhanced by an integrated light and precision 6x lens. Soft rubber eyecup eliminates ambient light glare. Conforms to U.S. Pharmacopeia requirements. Unit is CE marked and CSA approved. Temperature Range: Ambient to 400 degrees C Accuracy: +-0.5 degrees C from 20-200 degrees C +-1 degrees C from 200-400 degrees C with factory calibration Temperature Resolution: 0.1 degrees C Reproducibility: 0.2 degrees C Heat-up Time: 20-250 degrees C in 5 minutes Cool-down Time (with built-in cooling fan): 400-100 degrees C in 3 minutes Ramping Rate: Selectable from 0.1 degrees C/minute to 10.0 degrees C/minute in 0.1 degrees C/minute increments. Dimensions: 11.4W x 32H x 16.5D cm (41/2 x 122/3 x 61/2") Shipping Weight: 5 kg (11 lbs.) Ordering Information: Shipped with a vial of 100 capillary tubes.

This economical, point-of-use deionization unit provides the user with the flexibility to customize the water system and add additional cartridge holders if needed. It produces up to 4L per minute, depending on feedwater quality. Linkable modules feature quarter-turn quick release canisters. Double and single holders accept most Barnstead cartridges. Half-size holder 26302-253 accepts a variety of purification cartridges. Inlet/Outlet Connection: 12.7 mm (1/2") NPTF Maximum Inlet Pressure: 100 psig Inlet Temp. Range: 4 to 49 degrees C (40 to 120 degrees F) Maximum Flow Rate: 4 L per minute Holder Dimensions, Double: 17.8D x 38.1W x 68.6H cm (7 x 15 x 27") Single: 17.8D x 38.1W x 61H cm (7 x 15 x 24") Half-Size: 16.8D x 17.8W x 38.1H cm (65/8 x 7 x 15") Ordering Information: Systems 26302-250 and -252 include two full-length canisters, digital temperature- compensated purity meter, and draw-off valve. For cartridge kits and other accessories, contact your eGM sales representative. VWR offers validation services including IQ, OQ, and PQ protocol development and execution (in US only);

System features an extended upper buffer chamber that provides even heat distribution. Chamber brings the buffer into direct contact with the entire gel surface, providing efficient cooling. System requires less than 100mL of buffer per run. Built-in, full length, spring-loaded side clamps attach to a molded gasket to ensure a leakproof seal without the risk of overtightening. System may be used with precast gels, or with gels poured by hand. Gel Size: 10L x 10W cm (315/16 x 315/16") Buffer Volume, Upper Buffer Chamber: 100 mL Lower Buffer Chamber: 50 mL Dimensions: 18.4W x 12.7H x 8.3D cm (71/4 x 5 x 31/4") Ordering Information: Supplied with manufacturer's three-year warranty. Complete system includes an upper and lower buffer chamber; SuperSafe lid with attached power supply leads; one blank glass plate; one notched glass plate; one notched alumina plate; two 10-well, 0.8mm thick combs; and two 0.8mm thick side spacers.

Newest addition to SPT's Portable AC family - Dual Hose System with Self- Evaporating Technology! This 9,000btu, 4-in-1 system provides multi-season comfort. Designed to efficiently cool, dehumidify, or heat any space without permanent installation. Effectively improves air circulation in poorly ventilated spaces. Dual hose systems provide fast cooling. With one hose for air intake and the other for air exhaust, there is no negative pressure created inside the room. Self- Evaporating Technology - during the cooling process, water is extracted from the air into the unit. In Cool mode, most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiently without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. Note: Exhaust hose installation required (all standard accessories included). Included plastic slider kit forms up to 6.75 ft. Features and Functions 4-in-1 Technology 1. 9,000 BTU cooling power 2. 4,100 BTU electric heating power 3. Dehumidifier 4. Fan - Self evaporating technology - LCD display on remote and control panel - SMART Technology - Re-start IC Technology (unit restarts when power resumes after a power failure) - 24-hour programmable timer - 3 fan speeds in Cool mode: Auto - High - Low - 2 fan speeds in Heat mode: High - Low - Fire resistant PVC plastic housing - Auto-swing louvers - Washable air filter collects dust particles - Easy-grip handle and casters for easy mobility - Digital thermostat control (not applicable in Heat mode) - Choice of programmable timer or continuous operation - Extendable exhaust hose (up to 5.5 ft.) - Built-in water tank or extended water tube for continuous drainage - Limited 1 year warranty - UL approved Measuring conditions is based on factory testing conditions. Cooling - Room Temp: 80.6°F, Room Humidity: 60% / Heating - Room Temp: 68°F, Room Humidity: 60%. Specifications Cooling capacity 9,000 btu / hour Heating capacity (electric) 4,100 btu / hour Power consumption cooling 977 W heating 1246 W Amperage 8.5A Air volume (CFM) 176 Moisture removal 47 pints/day Operating temp 64 ~ 110° F Thermostat 64 ~90°F Control digital with LCD EER 9.21 dB (High / Low) 50.9 / 48.2 Power supply 115V / 60Hz Max room size 250 sq. ft. Timer 1 ~ 24 hours Fan speeds 3 (Auto - High - Low) Compressor Rotary Refrigerant / Load R22 / 1.4 lb Exhaust pipe max length 5.5 ft. Exhaust pipe diameter 5.25 in. Window kit material Plastic slider kit Window kit length Min: 28.25 in. / Max: 81.5 in. Product dimension (L x D x H) 18 x 18.5 x 33.5 in. Package dimension (L x D x H) 20.5 x 23 x 35 in. Net weight 82 lbs. Gross weight 88 lbs.

Newest addition to SPT's Portable AC family - Dual Hose System with Self- Evaporating Technology! This 13,000btu, 4-in-1 system provides multi-season comfort. Designed to efficiently cool, dehumidify, or heat any space without permanent installation. Effectively improves air circulation in poorly ventilated spaces. Dual hose systems provide fast cooling. With one hose for air intake and the other for air exhaust, there is no negative pressure created inside the room. Self- Evaporating Technology - during the cooling process, water is extracted from the air into the unit. In Cool mode, most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiency without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. Note: Exhaust hose installation required (all standard accessories included). Included plastic slider kit forms up to 6.75 ft. Features and Functions 4-in-1 Technology 1. 13,000 BTU cooling power 2. 4,100 BTU electric heating power 3. Dehumidifier 4. Fan - Self evaporating technology - LCD display on remote and control panel - SMART Technology - Re-start IC Technology (unit restarts when power resumes after a power failure) - 24-hour programmable timer - 3 fan speeds in Cool mode: Auto - High - Low - 2 fan speeds in Heat mode: High - Low - Fire resistant PVC plastic housing - Auto-swing louvers - Washable air filter collects dust particles - Easy-grip handle and casters for easy mobility - Digital thermostat control (not applicable in Heat mode) - Choice of programmable timer or continuous operation - Extendable exhaust hose (up to 5.5 ft.) - Built-in water tank or extended water tube for continuous drainage - Limited 1 year warranty - UL approved Measuring conditions is based on factory testing conditions. Cooling - Room Temp: 80.6°F, Room Humidity: 60% / Heating - Room Temp: 68°F, Room Humidity: 60%. Specifications Cooling capacity 13,000 btu / hour Heating capacity (electric) 4,100 btu/hour Power consumption cooling 1380 W heating 1246 W Amperage 12A Air volume (CFM) 235 Moisture removal 55 pints/day Operating temp 64 ~ 110° F Thermostat 64 ~90°F Control digital with LCD EER 9.42 dB (High / Low) 56.5 / 54.3 Power supply 115V / 60Hz Max room size 420 sq. ft. Timer 1 ~ 24 hours Fan speeds 3 (Auto - High - Low) Compressor Rotary Refrigerant / Load R22 / 1.4 lb Exhaust pipe max length 5.5 ft. Exhaust pipe diameter 6 in. Window kit material Plastic slider kit Window kit length Min: 28.25 in. / Max: 81.5 in. Product dimension (L x D x H) 18 x 19.75 x 32.5 in. Package dimension (L x D x H) 20.5 x 26 x 35 in. Net weight 86 lbs. Gross weight 93 lbs.

All orders are final. Product is not made until ordered. This unit uses thermo-electric technology to cool the beer which is ultra quiet and energy efficient. Also this cooling method uses absolutely no ozone depleating chemicals such as CFC's or

Safe, reliable cryostats are designed for operator comfort and are adaptable to multiple users and samples. Color-coded levers and graphics guide knifeholder adjustments. A simple, intuitive, multi-lingual touch screen display provides easy instrument operation. The angle of the clamp plate enables easy specimen pick-up. Cryostats provide fast specimen turn-around time through use of a cryobar with adjustable temperature controls and a dedicated cryobar refrigeration system that rapidly cools specimen to help prevent freezing the artifact. The cryostats cool rapidly from ambient to set temperature in as little as two hours. The "quickheated" specimen release feature allows easy removal of frozen specimen from the cryocassette. FE cryostat features an X/Y orienting head without specimen temperature control. FSE cryostat features an orienting head with specimen holder temperature control that allows for enhanced sectioning of a variety of tissue types. Microtome is located outside the cryochamber for faster temperature adjustment and ease of decontamination and cleaning. An automated fumigation cycle disinfects the cryochamber. A dual compressor system ensures specimen integrity by keeping specimens frozen if the cryobar fails. A remote alarm alerts user in case of system failure. Multi-level security code protection and lockable heated window prevent unauthorized access and protocol alterations. A positive locking flywheel prevents injury while working around blade and specimen. The three-level adjustable footrest helps reduce fatigue while sitting or standing. Rounded exterior edges and raised cutting area help prevent back strain while sectioning. Cryostats use CFC-free refrigerants and foam insulation. Cryostat is CE marked, CSA certified, and UL listed (Standard 3101). Dimensions, Overall: 125H x 83W x 74.5D cm (493/16 x 3211/16 x 295/16") Working Height: 105 cm (41") max. Chamber Access Width: 50 cm (1911/16") Microtom

Interior Dimensions,H x W x D, cm (in.): 147.3 x 73.7 x 61. Exterior Dimensions,H x W x D, cm (in.): 197 x 90.2 x 71.1. Thermo ScientificNo.: RPR2304A. Thermo ScientificNo.: RPR2304A. No. ofDoors: 1. Volume,L (cu. ft.): 659 (23.3). No. ofDrawers: 6. Pharmaceutical refrigerators feature the IntrLogic microprocessor control system, positive airflow systems, industrial quality cabinet construction, glass doors, and extra-strength refrigeration compressors selected for industrial, clinical, and scientific use. Enhanced digital electronic technology simplifies operation and delivers greater accuracy. Temperature is factory preset to 4 degrees C and adjustable from 1 to 8 degrees C. Icon-based controls and displays include graphic references for universal operation. A graphic thermometer confirms proper operation at a glance, indicating normal, high, or low temperature. Refrigerators feature audible and visual warnings for over- temperature, under- temperature, and power failure with visual status reports on critical functions. An advanced automatic defrost sensor manages the defrost cycle, minimizing trace amounts of frost buildup to maintain refrigeration coil efficiency for responsive and economical performance. A push-button alarm test and battery backup assure system readiness and sensor continuity. Remote alarm contacts are standard on every model. UL and C-UL listed. CE marked. TUV certified. VWR offers validation services including IQ, OQ, and PQ protocol development and execution (in US only);

This 28 bottle unit can be placed on a table top or be freestanding to keep your wine at just the right temperature. Also because of its thermo-electric cooling system, which involves very few moving parts, your wine will be protected from unneccessary vibration. Features: Attractive free-standing cellar with dual paned glass door, stainless steel trim Thermoelectric temperature control Digital temperature display Finish: Silver Dimensions: 28.5"(H) x 18.25"(W) x 22"(D) Weight: 52 LBS

8,800/8,500 BTUH. 11.5/11.5 E.E.R. Electronic Touch Controls with LED Display. 3.4 Dehumidification (pts/hr). 230/200 CFM Indoor Fan (High/Low). 70/45 Vent CFM. Corrosion- Treated Chassis Extends Life of the Unit in Sea Coast Areas. Electronic 7-Step Temperature Limiting To Prevent Overcooling or Overheating of Room. Heat Sentinel. 29 Sound Transmission Class (STC). Warm Grey Beige. Overall Depth (in.): 13 3/4. Overall Height (in.): 16. Overall Width (in.): 42. Approximate Shipping Weight (lbs.): 121. Net Weight (lbs.): 106. CFM Indoor Fan High: 230. CFM Indoor Fan Low: 200. Cooling E.E.R. (BTUH / Watt): 11.5/11.5. Dehumidification (pts./hr.): 3.4. Sensible Heat Ratio at 230 Volts: 58%. Vent CFM: 70/45. Power Factor: 86/86. Voltage: 230/208. Cooling - Amperes; F.L. - Cooling: 3.8/4.1. Cooling Amperes; L.R.: 21.0. Cooling - Watts: 765/740. Cooling BTUH: 8,800/8,500. Control Panel Door: Yes. Control Type: Standard Microcomputer Tactile touch pad with LED Display. Auto Power Recovery: Yes. Corrosion Treated: Yes. Freeze Sentinel: Yes. Heat Sentinel: Yes. Louver Style: Reversible. Upfront Filter: Yes. Auto Frost Control Monitor: Yes. Central Desk Control Compatibility: Yes. Electronic Micro Computer Control: Yes. Manual Vent Control: Hidden. Remote Thermostat: Compatible. Rotary Compressor: Yes. Solid State Thermostat Control: Yes. Temperature Limiting: Electronic 7-Step. Weather Protected Electrical Components: Yes. Vent Control: 3-position. ''SmartFan'' Fan Cycle: Yes. Fan Motor: 2. Fan Speed Selections - Cooling: Hi/Low. Fan Speed Selections - Fan Only: 2. Fan Speed Selections - Heating: Hi/Low. Heat - Cool: Yes. Universal Heaters: Yes. Fan Speed Control: Yes. Discharge Grille: 2-position. Sound Transmission Class (STC): 29. Duct Adaptor: RAK6052. Duct Extension: RAK601. Exterior Architectural Louvers: RAG61(Beige); RAG62(Maple); RAG63 (Bittersweet). Extruded Aluminum: RAG67. Insulated Wall Case: RAB71. SMC Wall Case: RAB77. Stamped Aluminum Exterior Rear Grille: RAG60. RAK3153 (Line Cord Kit): 8,600/7,100 (Electric Heat (Btuh)); 2,550/2,090 (Electric Heater Watts); 11.6/10.6 (Electric Heat Amps); 15 (Min. Circuit Protection (Amps)). RAK3202 (Line Cord Kit): 11,700/9,600 (Electric Heat (Btuh)); 3,450/2,820 (Electric Heater Watts); 15.5/14.1 (Electric Heat Amps); 20 (Min. Circuit Protection (Amps)). RAK3303 (Line Cord Kit): 17,000/13,900 (Electric Heat (Btuh)); 5,000/4,090 (Electric Heater Watts); 22.3/20.3 (Electric Heat Amps); 30 (Min. Circuit Protection (Amps)). RAK204D15P (Sub-Base): 8,600/7,100 (Electric Heat (Btuh)); 2,550/2,090 (Electric Heater Watts); 11.6/10.6 (Electric Heat Amps); 15 (Min. Circuit Protection (Amps)). RAK204D20P (Sub-Base): 11,700/9,600 (Electric Heat (Btuh)); 3,450/2,820 (Electric Heater Watts); 15.5/14.1 (Electric Heat Amps); 20 (Min. Circuit Protection (Amps)). RAK204D30P (Sub-Base): 17,000/13,900 (Electric Heat (Btuh)); 5,000/4,090 (Electric Heater Watts); 22.3/20.3 (Electric Heat Amps); 30 (Min. Circuit Protection (Amps)). Parts Warranty: Limited 1-year entire appliance; Limited 5-year sealed refrigerating system. Labor Warranty: Limited 1-year entire appliance; Limited 5-year sealed refrigerating system. GE Consumer and Industrial spans the globe as an industry leader in major appliance, lighting and integrated industrial equipment systems and services. They provide solutions for commercial, industrial and residential use in more than 100 countries which uses innovative technologies and ''ecomagination.' ' It's a GE initiative to aggressively bring to market new technologies that help customers and consumers meet pressing environmental challenges to deliver comfort, convenience and electrical protection and control. GE brings imagination to work. Versatile Zoneline Packaged Terminal Air Conditioners provide year-round comfort with individual heating and cooling temperature controls. Designed for a wide range of applications, these units are ideal for hotels and motels, office buildings, schools a...

Ideal for applications that require a controlled temperature bath combined with orbital shaking motion. Shakers feature an easy access drain system with quick disconnect, located in the front of the cabinet for convenience in draining and disinfecting the system. Twin baffles in the chamber minimize splashing and turbulence even at high speeds. Ideal for solubility studies, extraction procedures, cell cultures, general mixing, hybridization, bacterial suspensions, diagnostic tests, staining, destaining, and washing procedures. Triple eccentric drive enables continuous 24-hour operation, handles heavier loads, and provides smooth uniform agitation of full or unbalanced loads even at high speeds. Monitor and control bath temperature with PID temperature controller. Visual, user-adjustable overtemperature safety signal with independent thermostat provides additional backup by controlling the heat if the main controller fails. Shakers feature a powder-coated, cold-rolled steel exterior, and a seamless stainless steel interior with rounded corners. A strong, ABS housing surrounds and protects the polyester control panel. Analog units feature variable speed controlled by a rotary dial, a DC motor, and an LED digital display of temperature. An integrated tachometer monitors and displays speed in rpm to guarantee accurate setting, and the timer allows for continuous operation or timed shaking from 1-60 minutes. Digital units feature variable speed control, adjustable with up/down arrows, and a solid-state, brushless DC motor. Separate LED displays for temperature, speed, and operating time. Speed is adjustable in 1rpm increments. Shaker shutdown and audible and visual signals indicate speed deviations +-10% of setpoint, and temperature deviations of +-1 degrees C of setpoint. Timer allows for continuous operation or timed shaking from 0.1-999 minutes, or from 0.1-999 hours. Soft-start feature helps prevent sudden starts and stops to eliminate splashing of vessel conten

danielsquares Store Thermo King Electric 1.25 hp Motor F8562 460V NEW Up for consideration s a new Thermo King 1.25 Hp electric motor.3 Ph 1/.25 F8562 460/480 Volt 60 Hz RPM 3480/1725 PS6Q2002H Retail $350.00 WE INVITE YOU TO VISIT OUR STORE TO VIEW OTHER QUALITY TOOLS AND EQUIPMENT Email with particulars for fast shipping quote We reserve the right to cancel this ebay listing at any time as item is also for sale locally Winner must Pay through Paypal, money order or cashiers check. Ohio resid

All orders are final. Product is not made until ordered. This unit uses thermo-electric technology to cool the beer which is ultra quiet and energy efficient. Also this cooling method uses absolutely no ozone depleating chemicals such as CFC's or

no. ofdoors: 1. no. ofshelves: 2. interior dimensions: 51 x 51 x 51 -|- , h x d x w, cm (in.). exterior dimensions: 85 x 66 x 61 -|- , h x d x w, cm (in.). amps/breaker: 8/15. ship. wt.,kg (lbs.): 96 (212). General-purpose refrigerators feature the IntrLogic microprocessor control system, positive airflow systems, and industrial quality cabinet construction. Extra-strength refrigeration compressors are desinged for industrial, clinical, and scientific use. Enhanced digital electronic technology simplifies operation and delivers greater accuracy. Temperature is factory preset to 4 degrees C and adjustable from 1 to 8 degrees C. Icon-based controls and displays include graphic references for universal operation. A graphic thermometer confirms proper operation at a glance, indicating normal, high, or low temperature. Refrigerators feature audible and visual warnings for over- temperature, under- temperature, and power failure with visual status reports on critical functions. An advanced automatic defrost sensor manages the defrost cycle, minimizing trace amounts of frost buildup to maintain refrigeration coil efficiency for responsive and economical performance. A push-button alarm test and a battery backup assure system readiness and sensor continuity. Remote alarm contacts are standard on every model. Refrigerators have solid doors except where otherwise specified. UL and C-UL listed. CE marked. TUV certified. Ordering Information: VWR offers validation services including IQ, OQ, and PQ protocol development and execution (in US only);

Brand New In Box Avanti Table Top Thermo Electric Bottled Water Cooler w/ Electronic Display Fast UPS SHIPPING Full Manufacturer's Warranty Model# WD31EC Color: White Avanti Table Top Thermo-Electric Water Cooler WD31EC Great for use at home, workplace, dorms, RV's or on boats. Thermoelectric design - no compressor - much less noise. Avanti Thermo Electric Bottled Water Cooler features: Hot and Cold Water Selectable Operational Modes: Normal or Energy Saver Lightweight and Durable ABS Construct

This is our most compact table top wine cooler which stores 6 bottles of your favorite wine at just the right temperature. Also because of its thermo-electric cooling system, which involves very few moving parts, your wine will be protected from unneccessary vibration. Features: Attractive freestanding cellar with dual paned glass door, stainless steel trim Thermoelectric temperature control Digital temperature display Finish: Black / Stainless Dimensions: 10.13"(W) x 19.75"(D) x 14.88"(H) Weight: 20.3 LBS

This unit holds up to 16 bottles of your favorite wine at just the right temperature. Also because of its thermo-electric cooling system, which involves very few moving parts, your wine will be protected from unneccessary vibration. Features: Attractive freestanding cellar with dual paned glass door, stainless steel trim Thermoelectric temperature control Sturdy shelf racking for individual bottle storage Digital temperature display 3 pull-out chrome shelves Finish: Black / Stainless Dimensions: 17.13"(W) X 20.75"(D) x 20.13"(H) Weight: 35.5 LBS

Packaged in PETG plastic bottles. Fetal Bovine Serum, Defined: Meets specifications of <=10EU/mL of endotoxin and <=10mg/dL of hemoglobin. This serum is filtered through 40nm pore-size rated filters. An extensive biochemical assay is supplied. Item number 82013-566 is designated heat inactivated. Fetal Bovine Serum, Characterized: Meets specifications of <=25EU/mL of endotoxin and <=25mg/dL of hemoglobin. Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Item number 83007-198 is designated heat inactivated. Fetal Bovine Serum, Standard: Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Fetal Bovine Serum, Charcoal/Dextran Treated: Available for users requiring reduced hormone levels, the serum is processed using a proprietary Charcoal/Dextran treatment proven to reduce hormones and growth factors. Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Dialyzed: For applications requiring serum depleted of small molecules (less than 10,000mw). Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Embryonic Stem Screened: Eliminates the need for prescreening serum prior to use with embryonic stem cells. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, TET Screened: Designed for use with tetracycline- regulated gene expression systems in cultured cells. Using an ELISA system, high quality FBS lots are selected with undetectable tetracycline levels. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, USDA Tested: Collected in USDA abattoirs, and filtered through triple 100nm pore-size rated filtration system. Item number 82013-576 is designated heat inactivated. Australian Fetal Bovine Serum, Standard: Sourced only from USDA approved abattoirs in Australia. Filtered through triple 100nm pore-size rated

ULTRA LEAN THERMO offers stronger support for weight loss. This product is a stimulant and as such helps induce fat metabolism. STIMULANT THERMOGENICS (SINEPHRINE HCL, GREEN TEA EXTRACT, AND CAFFEINE ANHYDROUS) act to stimulate thermogenesis or fat burning. Those with hypersensitive nervous systems should avoid this product. Sinephrine is reported to be less stimulating to the nervous system than Ephedrine and as such may offer a safer alternative to the Ephedra/Ephedrine products of the past.NON-STIMULATO RY FAT METABOLISM ENHANCERS (NOPAL CACTUS LEAF, GARCINIA CAMBOGIA, COLEUS FORSKOHLII, L-CARNITINE) Nopal is a vegetarian fat blocker derived from the cactus leaf. It works similarly to Chitosan (sea shell source) without the animal source or risk of shell fish allergy. By combining with dietary fat in the intestine and blocking absorption, fewer fat calories are absorbed with each meal.

Newest addition to SPT's Portable AC family - Dual Hose System with Self- Evaporating Technology! This 13,000btu, 3-in-1 system provides multi-season comfort. Designed to efficiently cool and dehumidify any space without permanent installation. Effectively improves air circulation in poorly ventilated spaces. Dual hose systems provide fast cooling. With one hose for air intake and the other for air exhaust, there is no negative pressure created inside the room. Self- Evaporating Technology - during the cooling process, water is extracted from the air into the unit. Most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiency without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. Note: Exhaust hose installation required (all standard accessories included). Included plastic slider kit forms up to 6.75 ft. Features and Functions 3-in-1 Technology 1. 13,000 BTU cooling power 2. Dehumidifier 3. Fan - Self evaporating technology - LCD display on remote and control panel - SMART Technology - Re-start IC Technology (unit restarts when power resumes after a power failure) - 24-hour programmable timer - 3 fan speeds: Auto - High - Low - Fire resistant PVC plastic housing - Auto-swing louvers - Washable air filter collects dust particles - Easy-grip handle and casters for easy mobility - Digital thermostat control - Choice of programmable timer or continuous operation - Extendable exhaust hose (up to 5.5 ft.) - Built-in water tank or extended water tube for continuous drainage - Limited 1 year warranty - UL approved Measuring conditions is based on factory testing conditions. Cooling - Room Temp: 80.6°F, Room Humidity: 60% / Heating - Room Temp: 68°F, Room Humidity: 60%. Specifications Cooling capacity 13,000 btu / hour Power consumption 1380 W Amperage 12A Air volume (CFM) 235 Moisture removal 55 pints/day Operating temp 64 ~ 110° F Thermostat 64 ~90°F Control digital with LCD EER 9.42 dB (High / Low) 54.9 / 52.3 Power supply 115V / 60Hz Max room size 420 sq. ft. Timer 1 ~ 24 hours Fan speeds 3 (Auto - High - Low) Compressor Rotary Refrigerant / Load R22 / 1.4 lb Exhaust pipe max length 5.5 ft. Exhaust pipe diameter 6 in. Window kit material Plastic slider kit Window kit length Min: 28.25 in. / Max: 81.5 in. Product dimension (L x D x H) 18 x 19.75 x 32.5 in. Package dimension (L x D x H) 20.5 x 26 x 35 in. Net weight 86 lbs. Gross weight 93 lbs.

Newest addition to SPT's Portable AC family - Dual Hose System with Self- Evaporating Technology! This 11,000btu, 3-in-1 system provides multi-season comfort. Designed to efficiently cool and dehumidify any space without permanent installation. Effectively improves air circulation in poorly ventilated spaces. Dual hose systems provide fast cooling. With one hose for air intake and the other for air exhaust, there is no negative pressure created inside the room. Self- Evaporating Technology - during the cooling process, water is extracted from the air into the unit. Most of this water is recycled and used to cool the cooling coils. This creates improved cooling efficiently without adding energy cost. The moisture is then pushed out with the exhaust air, leaving you a virtually no-drain unit. In extreme humid conditions, if condensation collects faster than the unit can evaporate, the excess water will collect in the built-in tank. When the tank becomes full, compressor will automatically shut-off and unit will indicate that drainage is needed. Note: Exhaust hose installation required (all standard accessories included). Included plastic slider kit forms up to 6.75 ft. Features and Functions 3-in-1 Technology 1. 11,000 BTU cooling power 2. Dehumidifier 3. Fan - Self evaporating technology - LCD display on remote and control panel - SMART Technology - Re-start IC Technology (unit restarts when power resumes after a power failure) - 24-hour programmable timer - 3 fan speeds: Auto - High - Low - Fire resistant PVC plastic housing - Auto-swing louvers - Washable air filter collects dust particles - Easy-grip handle and casters for easy mobility - Digital thermostat control - Choice of programmable timer or continuous operation - Extendable exhaust hose (up to 5.5 ft.) - Built-in water tank or extended water tube for continuous drainage - Limited 1 year warranty - UL approved Measuring conditions is based on factory testing conditions. Cooling - Room Temp: 80.6°F, Room Humidity: 60% / Heating - Room Temp: 68°F, Room Humidity: 60%. Specifications Cooling capacity 11,000 btu / hour Power consumption 1253 W Amperage 10.9A Air volume (CFM) 176 Moisture removal 51 pints/day Operating temp 64 ~ 110° F Thermostat 64 ~90°F Control digital with LCD EER 8.78 dB (High / Low) 51 / 49.5 Power supply 115V / 60Hz Max room size 350 sq. ft. Timer 1 ~ 24 hours Fan speeds 3 (Auto - High - Low) Compressor Rotary Refrigerant / Load R22 / 1.4 lb Exhaust pipe max length 5.5 ft. Exhaust pipe diameter 5.25 in. Window kit material Plastic slider kit Window kit length Min: 28.25 in. / Max: 81.5 in. Product dimension (L x D x H) 18 x 18.5 x 33.5 in. Package dimension (L x D x H) 20.5 x 23 x 35 in. Net weight 82 lbs. Gross weight 88 lbs.

Saving Energy has never been easier using Thermo Cube thermostatically controlled outlet! Thermo Cube is a unique electrical device that will thermostatically control power according to ambient temperature 15 AMP unit plugs into any grounded 120v outlet providing two 120v receptacles for heating or cooling applications No installation required-saves money by only operating when temperature requires Four temperature control ranges to choose from: Model TC-1 On at 0 degrees F, Off at 10 degrees F

This Mini Dehumidifier uses Peltier (Thermo- Electric) Technology to provide whisper quiet operation. The compact size is ideal for nurseries, small bedroom, closets and wardrobes. Automatically switch off when water tank is full, with indicator light; as well as option for continuous drainage set up. UV Light and TiO2 mesh kills germs and bacteria, operates automatically when unit is turned on. Benefits - No compressor - Quiet operation - No vibration - No refrigerant Ideal For - Nurseries - Small bedrooms - Closets, wardrobes and cupboards - Under sinks Features and Functions - Moisture removal rate of 650ml per 24 hours (86°F, 80%RH) - 2.2 liters water tank capacity - Compact design - Power and Full tank indicator lights - Auto cut-off when tank is full or removed - continuous drain option - Recessed handle for easy transport - Transparent water tank Measuring conditions is based on factory testing conditions. Room Temp: 86°F, Room Humidity: 80%. Specifications Moisture removal 650 ml Water tank capacity 2.2 liters UV light life span approx. 8,000 hrs Power supply 12V DC adaptor (UL listed) Power consumption 86 W Unit dimension (W x D x H) 8.05 x 5.5 x 14.17 in. Net weight (w/o adaptor) 4.85 lbs

Packaged in PETG plastic bottles. Fetal Bovine Serum, Defined: Meets specifications of <=10EU/mL of endotoxin and <=10mg/dL of hemoglobin. This serum is filtered through 40nm pore-size rated filters. An extensive biochemical assay is supplied. Item number 82013-566 is designated heat inactivated. Fetal Bovine Serum, Characterized: Meets specifications of <=25EU/mL of endotoxin and <=25mg/dL of hemoglobin. Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Item number 83007-198 is designated heat inactivated. Fetal Bovine Serum, Standard: Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Fetal Bovine Serum, Charcoal/Dextran Treated: Available for users requiring reduced hormone levels, the serum is processed using a proprietary Charcoal/Dextran treatment proven to reduce hormones and growth factors. Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Dialyzed: For applications requiring serum depleted of small molecules (less than 10,000mw). Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Embryonic Stem Screened: Eliminates the need for prescreening serum prior to use with embryonic stem cells. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, TET Screened: Designed for use with tetracycline- regulated gene expression systems in cultured cells. Using an ELISA system, high quality FBS lots are selected with undetectable tetracycline levels. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, USDA Tested: Collected in USDA abattoirs, and filtered through triple 100nm pore-size rated filtration system. Item number 82013-576 is designated heat inactivated. Australian Fetal Bovine Serum, Standard: Sourced only from USDA approved abattoirs in Australia. Filtered through triple 100nm pore-size rated

Packaged in PETG plastic bottles. Fetal Bovine Serum, Defined: Meets specifications of <=10EU/mL of endotoxin and <=10mg/dL of hemoglobin. This serum is filtered through 40nm pore-size rated filters. An extensive biochemical assay is supplied. Item number 82013-566 is designated heat inactivated. Fetal Bovine Serum, Characterized: Meets specifications of <=25EU/mL of endotoxin and <=25mg/dL of hemoglobin. Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Item number 83007-198 is designated heat inactivated. Fetal Bovine Serum, Standard: Filtered through triple 100nm pore-size rated filtration system. Supplied with a biochemical assay. Fetal Bovine Serum, Charcoal/Dextran Treated: Available for users requiring reduced hormone levels, the serum is processed using a proprietary Charcoal/Dextran treatment proven to reduce hormones and growth factors. Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Dialyzed: For applications requiring serum depleted of small molecules (less than 10,000mw). Filtered through triple 100nm pore-size rated filtration system. Fetal Bovine Serum, Embryonic Stem Screened: Eliminates the need for prescreening serum prior to use with embryonic stem cells. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, TET Screened: Designed for use with tetracycline- regulated gene expression systems in cultured cells. Using an ELISA system, high quality FBS lots are selected with undetectable tetracycline levels. Filtered through sequential 40nm (0.04um) pore-size rated filtration system. Fetal Bovine Serum, USDA Tested: Collected in USDA abattoirs, and filtered through triple 100nm pore-size rated filtration system. Item number 82013-576 is designated heat inactivated. Australian Fetal Bovine Serum, Standard: Sourced only from USDA approved abattoirs in Australia. Filtered through triple 100nm pore-size rated

11" DIAM. 750 CFM ELECTRIC ENGINE-COOLING FAN Less than 3-3/4" thick for easy installation on all vehicles! Replaces power-wasting, engine-driven fan Can be used as an auxiliary cooling fan on air-conditioned or trailer towing vehicles Built-in shroud improves airflow Use as primary cooling fan for 4-cyl. engines. Powerful pancake-style motor, 10 plastic blades, blade guard. Goes on automatically at 150deg.-240deg. F. Fan can operate as a pusher (mount in front of radiator) or puller (mount in back of radiator). Includes nylon installation rods (mount through radiator core), hardware, instructions. 12V. Overall: 12-5/8"W x 13-1/4"H x 2-1/3"D. 9.0 amps. Please note: Vehicles that require additional cooling or vehicles with large V8s should use 2 fansboth in front or in back.NOTE: Be sure to measure the space in your vehicle prior to ordering to ensure you order the correct size.

11" DIAM. 750 CFM ELECTRIC ENGINE-COOLING FAN Less than 3-3/4" thick for easy installation on all vehicles! Replaces power-wasting, engine-driven fan Can be used as an auxiliary cooling fan on air-conditioned or trailer towing vehicles Built-in shroud improves airflow Use as primary cooling fan for 4-cyl. engines. Powerful pancake-style motor, 10 plastic blades, blade guard. Includes manual on/off switch. Fan can operate as a pusher (mount in front of radiator) or puller (mount in back of radiator). Includes nylon installation rods (mount through radiator core), hardware, instructions. 12V. Overall: 12-5/8"W x 13-1/4"H x 2-1/3"D. 9.0 amps. Please note: Vehicles that require additional cooling or vehicles with large V8s should use 2 fansboth in front or in back. NOTE: Be sure to measure the space in your vehicle prior to ordering to ensure you order the correct size.