> audio line input to usb

Tascam's US144 Interface, Now Upgraded with An Addition  Powerful Feature Set. Tascam has upgraded their best-selling USB audio interfaces to feature improved audio performance, a sleeker compact design and adds S/PDIF digital audio I/O for the transfer of four channels of 96kHz/24-bit audio to and from a computer. The simplistic design of the US144 MkII includes two phantom powered XLR mic inputs, two balanced 1/4 inch line inputs and a single guitar level instrument input. Connect to MIDI devices with the onboard MIDI in and out to pass control messages to pass thru to your computer. Co nnect the unbalanced line outputs to a pair of studio monitors or use a pair of headphones through with an independent headphone level control. A copy of Steinberg's 48-track Cubase LE4 is included to begin recording right away. Tascam's US144 Features Bus-powered USB 2.0 audio interface Two XLR microphone inputs with phantom power Two 1/4 inch balanced line inputs Switchable guitar level input 1/4 inch stereo headphone output MIDI and S/PDIF stereo coaxial input and output Individual Line and Headphone out level controls Up to 96kHz/24-bit audio resolution Zero-latency hardware monitoring Mac and Windows drivers included Steinberg Cubase LE4 48-track recording software included Aluminum case construction

The Phonic Helix Board 12 Plus is a 12 input audio mixer with DFX and USB Interface. It features a 192 KHz USB 2.0 interface that lets you individually stream up to 8 independent channels of audio to the computer and return two channels to the mixer for monitoring - all with near-zero latency. An additional stereo stream of audio is available at sampling rates lower than 192 kHz, with users able to utilize the main mix, ALT 3/4 and AUX 1 & AUX 2 signal for recording. Phonic Helix Board 12 Plus Features 12-input small-format analog mixer with extremely low noise circuitry Onboard USB 2.0 interface for sending up to 10 independent channels of audio to computer with near-zero latency Sampling rate selectable up to 192 kHz in 24-bit resolution A pre/post switch is available on each channel for swapping channel sends to computer from pre-low cut, -EQ to post-EQ, post-fader signals DFX, our 32/40-bit digital multi-effect processor with 100 programs plus tap delay, tone generator and foot switch jacks Two channels of monitoring from computer via USB 2.0 interface Channel 9/10 routed to computer can be selected from main mix, ALT 3/4 and AUX 1/2 Four mono Mic/Line channels Two stereo channels, two stereo AUX returns, two AUX sends 3-band EQ on each channel 75 Hz low-cut filter on mono channel Inserts on channel 1 & 2 +48V phantom power on Mic channels Stereo AUX send 1 cue for monitoring individual channel Master AUX section with EFX to Monitor Extra ALT 3-4 stereo bus Control room/Phones source matrix Balanced master output with 60 mm fader control High-volume headphone output Compatible with Mac OS X and Windows XP & Vista Steinberg's Cubase LE 4 workstation software included Pre/Post switches on each input channel allow users to adjust the outgoing USB 2.0 signal between a pre-EQ, pre-fader, pre-low cut, to a post signal. An onboard 32/40-bit digital multi-effect processor provides 100 popular programs, tap delay and a foot switch jack. Four extremely low noise Mic/Line preamps, each with 75 Hz low cut filters, inserts and phantom power, and two stereo Line channels offer a variety of input options. Each channel has a 3-band EQ and an option to send the signal to the ALT 3-4 stereo bus, where several inputs can be grouped and controlled together. Tracking individual inputs is easy with the stereo AUX cue. Stereo RCA inputs and outputs make the addition of digital and analog playback and recording devices effortless. Additional features include two AUX sends, two stereo AUX returns, balanced stereo main outs, master AUX section with EFX to monitor, control room/phones source matrix and Steinberg's Cubase LE 4 digital audio workstation software.

Years of Recording Innovat ion Provides a Powerful Interface for Your Studio! A culmination of decades of recording innovation, Tascam brings you the US2000, a single rackspace, 16 input, 4 output recording interface that delivers an incredible recording experience straight to your studio. Featuring 8 XLR mic inputs with phantom power, you can use the US2000 to record a full drumset in the studio and connect any synths, amp modelers and effects processors to any one of the additional six balanced 1/4 inch line inputs. When you connect an optional 8 input front end through the S/PDIF input and get 16 tracks, enough to capture a live band. Tascam US2000 Features USB 2.0 audio interface with 16 inputs and 4 outs 96kHz/24-bit audio resolution Eight XLR microphone inputs with phantom power Six 1/4 inch balanced line inputs Four 1/4 inch balanced line outputs Two 1/4 inch instrument inputs (channel 7 and 8 on front panel combi jacks) Stereo S/PDIF digital in and out 100-LED meter bridge (5 segments for each input and output) Zero-latency direct monitoring with mono/stereo switch for each pair of inputs 1/4 inch balanced stereo monitor output with its own volume control 1/4 inch stereo high-powered headphone output Mac and Windows compatible Steinberg Cubase LE4 48-track recording software included High-tech, attractive aluminum case design The US2000 transmits your instruments at up to 96kHz/24-bit audio quality over a high-speed USB 2.0 connection to your computer. To keep track of all of your inputs and outputs, the US2000 has a meter bridge made up of 100 Led. Connections are hidden on the rear panel, except for a pair of combo jacks on the front for easy access. Cubase LE4 Included with the US2000 is a copy of Cubase LE4 from Steinberg. This full-featured recording software captures up to 48 tracks of audio with another 64 MIDI tracks. You can edit your tracks to perfection using a variety of modes and tools. Automated mixing is included to create the perfect master. Cubase LE4 supports VST effect and instrument plug-ins, which an assortment included with the application. Tascam's copy of Cubase LE4 can record 16 channels at a time so you can take advantage of all the inputs on the US2000. Tascam's high-quality audio interface takes advantage of the latest USB technology to provide such high channel count over USB 2.0. Step up to the ultimate in compact, great sounding interfacing with the US2000.

The ION Audio Profile Pro is a USB turntable with a line input with contemporary , low-profile looks and a sleek, piano black finish. The Profile Pro turntable is designed to capture the music from your vinyl records and turn it into portable, flexible, digital MP3s that you can enjoy at home and on the go. ION Audio Profile Pro USB Turntable Features Turn your records into MP3s using your Mac or PC Connect and convert other music sources via line input Play records on your home stereo without needing a preamplifier Plug-and-play USB computer connection requires no driver installation 33 1/3 and 45 RPM settings Enables you to transfer 78 RPM albums using included software EZ Vinyl/Tape Converter software quickly transfers your music to iTunes Audacity software for reducing pops, cracks and hiss on worn records Stereo 1/8 inch input for connecting other music sources The Profile Pro turntable is an music-conversion system based on a multi-speed USB turntable with a dust cover. The turntable has simple USB output that enables you to capture music from records onto your computer. ION’s EZ Vinyl/Tape Converter software assists you in creation of flexible MP3 files you can listen to on your computer, load onto your iPod, or record to CD. Profile Pro also has a line input so you can plug in virtually any other music source and turn it into MP3s – tape decks, MiniDiscs, and most any other format. When not converting records, you can also enjoy your classic vinyl records using PROFILE PRO as a standard record player. ION Audio Profile Pro Includes Profile Pro turntable Slipmat 45 RPM adapter USB cable CD Quickstart Guide Safety Instructions and Warranty Information

A next-generation mobile recording interface, the M-Audio Fast Track Ultra features high-speed USB 2.0 technology for advanced performance. This advanced interface delivers simultaneous 8x8 24-bit/96kHz audio via M-Audio's rock-solid low-latency drivers so you can record and route lots of audio. The MX Core DSP technology gives you flexible channel routing, monitor submixing, and effects processing to make handling all those audio signals straightforward and easy. 4 preamps with award-winning M-Audio Octane preamp circuitry give you premium sound.Like FireWire, USB 2.0 delivers the high bandwidth necessary for professional 24-bit/96kHz audio resolution throughout the recording and monitoring process. The increased data speed lets you enjoy exceptional fidelity on all of your inputs and outputs simultaneously. Speed Comparisons in Mbps Connection: Maximum Speed USB 1.1: 12Mbps USB 2.0: 480Mbps FireWire 400: 400MbpsBuilt-in effects processing Tired of tracking vocals and instruments dry? Fast Track Ultra features MX Core DSP technology that gives you reverb and delay on the headphone outputs with separate sends for every channel. Adding effects is an easy way to inspire creativity and infuse a performance with new energy-without taxing your CPU resources.Make the connection Fast Track Ultra provides a complete recording solution, with six channels of analog inputs and outputs plus 2-channel digital S/PDIF I/O. Unlike most USB interfaces, it features two dedicated inserts on the first two channels, giving you the ability to insert outboard processing before A/D conversion. Easy connection via a single USB 2.0 cable delivers both audio and MIDI communication with your computer. Compatibility with most major audio software, means seamless integration into any studio setup.MX Core DSP technology for sophisticated channel routing The Fast Track Ultra makes it easy to create multiple monitor mixes when recording other musicians. The robust MX Core mixer employs an array of eight individual DSP cores to deliver near-zero latency and a matrix for sophisticated channel routing options- accessible via an intuitive control panel that utilizes a separate mixer for each pair of outputs. The mixer expands the total I/O to an impressive 16 x 8 configuration, allowing you to connect synths and outboard gear to any of the interface's hardware inputs, then mix them with the eight audio streams coming from your computer. Professional Octane preamp technology The quality of your recordings is only as good as the initial signal. The Fast Track Ultra features four preamps with multi-award-winnin g M-Audio Octane technology, creating a premium front end that delivers amazing audio clarity. You get professional, low-noise, high-gain preamplification with enough channels for a variety of miking applications. Features include +48V phantom power for condenser mics, signal/peak LED indicator lights and a pull-out gain knob that activates a 20dB pad for recording at high volumes. See why world-class artists choose the M-Audio Octane preamp.Dual headphone amp Whether you usually track vocals or an ensemble, you're likely to need multiple headphone mixes. Fast Track Ultra has two completely independent headphone outputs so you can take advantage of the DSP mixer's powerful routing options and create the right mix for your performers- complete with reverb and delay.

The EMU Tracker Pre USB 2.0 Audio Interface offers pristine 24-bit/192kHz recording and playback, direct monitoring, and a host of professional features in a compact, USB bus-powered package. The Tracker Pre USB provides users with two Class-A ultra-low noise Mic/Line/Hi-Z preamplifiers that can be run independently or in stereo to record guitars, keyboards or microphones with optimal audio performance. CurrentMorph, a patent-pending circuit design, allows Tracker Pre to offer +48V phantom power and use premium high-power converters while using only USB bus power. EMU Tracker Pre Features Pristine 24-bit/192kHz A/D and D/A converters (A/D and D/A: 112dB measured SNR performance) deliver unmatched USB audio fidelity for pristine audio quality Preamplified analog signals are available before the A/D converters, allowing the Tracker Pre to be used as a standalone high-quality stereo microphone preamp (using optional power supply) Hardware zero-latency direct monitoring (mono or stereo) with continuously variable level control Plug-and-play operation with hands-on control of all major functions like direct monitoring level, headphone level, preamplifier gain and more Independent ground lift switches for optimal audio fidelity and flexibility USB bus powered (can also be powered using optional 5V power supply) Cross-platform support (Mac OS X and Windows XP32/XP64/Vista32 /Vista64) and compatibility with most popular audio/sequencer applications (ASIO2, WDM, MME, Apple Core Audio and Core MIDI supported) I/O Configuration Two XTC Class-A, ultra-low noise, Mic/Line/Hi-Z preamps. Balanced XLR, 1/4-inch TRS and 1/8-inch Inputs (-127dB EIN) with 60dB of gain 1/8-inch Stereo Condenser Microphone Input with 5V Power Two 1/4-inch Balanced/Unbalanc ed Outputs (112dB SNR) Two 1/4-inch Unbalanced Send/Return Inserts prior to A/D converters Stereo headphone output (112dB SNR)

Behringer's UCA222 USB Audio Interface offers Ultra-Low Latency connectivity with your computer, 2 inputs, 2 outputs, Digital Output and the Massive Software Bundle. USB audio interfaces allow you to connect just about any audio source to your MAC or PC. Perfect for transferring old records or tapes to digital audio (MP3s, WAVs, Etc.). Ultra-Low Latency mean that when you are playing an instrument you will experience less delay between striking the chord and the sound coming from your computer's speakers. This is key when choosing an audio interface. The Behringer UCA222 offers this and more. Look at these features and see for yourself! Behringer UCA222 USB Audio Interface Features Ultra-flexible audio interface connects your instruments, mixer, etc. with your computer for recording and playback Revolutionary energyXT2.5 Compact music production software included with feature-rich audio/MIDI sequencer that loads almost instantaneously on all computer platforms Massive software bundle includes Audacity audio editor, comprehensive podcasting software and over 150 virtual instruments and effect plug-ins Works with your PC or Mac computer—no setup or drivers required High-resolution 48 kHz converters for high-end audio quality Stereo Headphone output with dedicated Level control lets you monitor both input and output Additional S/PDIF optical output for direct digital conversion Powered via USB—no external power supply needed High-quality components and exceptionally rugged construction ensure long life Conceived and designed by BEHRINGER Germany

Hyundai Part # 08620-2L000 We Have a limited # of these to sell. We were lucky enough to be able to buy these from a Dealer that no longer sells Hyundai Cars. The dealer was giving these away as a incentive to car buyers. You don't have to Fumble around with your ipod while you drive. This cable gives you the convenience of control and charging of your iPod from your Factory Radio. This one simple cable makes the connection to the usb and 3.5mm input found in the center console. This will allow

Hyundai Part # 08620-2L000 We Have a limited # of these to sell. We were lucky enough to be able to buy these from a Dealer that no longer sells Hyundai Cars. The dealer was giving these away as a incentive to car buyers. You don't have to Fumble around with your ipod while you drive. This cable gives you the convenience of control and charging of your iPod from your Factory Radio. This one simple cable males the connection to the usb and 3.5mm input found in the center console. This will allow