> Cisco Refurbished Cisco Catalyst WATM CAM 2P Carrier Card Module

Cisco Catalyst 6500 Switch Fabric Module, WS-C6500-SFM The Switch Fabric Module (SFM) for the Catalyst 6500 series switches delivers an increase in available system bandwidth from the existing 32- to 256-Gbps. The Switch Fabric Module enables a new architecture that allows 30 Mpps of Cisco Express Forwarding (CEF)-based central forwarding performance on Supervisor Engine 2 and over 100 Mpps via distributed forwarding on line cards. The higher bandwidth and performance enabled by the Switch Fabric Module coupled with advanced services such as Quality of Service (QoS) and security in hardware via access control lists (ACLs) make Catalyst 6500 series the premier platform for both service providers as well as Enterprises. Note: The Switch Fabric Module requires a Supervisor Engine 2 and must be installed in slot 5 or slot 6 of the Catalyst 6506, Catalyst 6509, or Catalyst 6509-NEB switches. The Switch Fabric Module cannot be installed in the Catalyst 6513 switch or the Catalyst 6503 switch. Form Factor: Plug-in module Dimensions (WxDxH): 39.1 cm x 42.7 cm x 4.5 cm Data Transfer Rate: 256 Gbps Features: Layer 3 switching, Layer 2 switching Condition: Pre-owned in good condition Warranty: 1 Year We carry a full line of accessories for Cisco equipment. If you do not see what you need in our store please contact us .

Cisco's Catalyst 6000 Family Fast Ethernet switching modules offer a number of advanced features that make it easier to migrate to or implement a Fast Ethernet network. The 10/100 Fast Ethernet switching modules support autosensing / autonegotiation to determine the speed and duplex mode of the attached device. All Fast Ethernet switching modules are hot swappable without interruption of the Catalyst 6000 Family switch.

The Cisco Catalyst 6500 Series Wireless Services Module (WiSM) provides unparalleled security mobility redundancy and ease of use for business- critical wireless LANs (WLANs). It delivers the most secure wireless system available for enterprise-scale WLANs. As a Cisco Catalyst 6500 Series module it delivers centralized security policies wireless intrusion prevention system (IPS) capabilities award-winning RF management quality of service (QoS) and Layer 3 fast secure roaming for WLANs. As a key component of the Cisco Unified Wireless Network the Cisco WiSM provides the control security redundancy and reliability that network managers need to scale and manage their wireless networks as easily as they scale and manage their traditional wired networks.The Cisco WiSM is a member of the Cisco Wireless LAN Controller family. It works in conjunction with Cisco Aironet lightweight access points the Cisco Wireless Control System (WCS) and the Cisco Wireless Location Appliance to support mission-critical wireless data voice and video applications. It provides real-time communication between lightweight access points and other WLAN controllers to deliver a secure and unified wireless solution.The Cisco WiSM smoothly integrates into existing Cisco Catalyst 6500 Series enterprise networks. It communicates using the emerging Lightweight Access Point Protocol (LWAPP) standard to establish secure connectivity between access points and modules across Layer 3 networks. This protocol enables the automation of important WLAN configuration and management functions for cost-effective WLAN operations. With this integrated approach to large-scale wireless networking customers can realize significant total cost of ownership benefits by streamlining support costs and reducing planned and unplanned network downtime.The Cisco WiSM scales to deliver secure enterprise wireless access to main branch and remote campuses. It is designed for medium-sized and large enterprise facilities with clustering capabilities of up to 3600 lightweight access points per roaming domain. It scales to 300 lightweight access points per module with support for 10000+ wireless client devices. For even greater scalability the Cisco WiSM can be deployed in conjunction with other Cisco wireless LAN controllers.

FlexWAN Module for Cisco 7600 / Catalyst 6000

Cisco Two Voice/Fax Interface Card Slot Network Module, NM-2V Cisco Description: Cisco Voice Network Modules provide enterprises, managed service providers, and service providers the ability to directly connect the public switched telephone network (PSTN) and legacy telephony equipment to existing Cisco 2600, Cisco 3600, and Cisco 3700 routers. The NM-1V and NM-2V carrier modules support Voice Interface Cards (VICs) to provide this connectivity. Note: The NM-1V and NM-2V carrier modules do not support WAN Interface Cards (WICs), which are data-only interface cards. The "V" in the product name indicates that these are voice carrier modules. The WIC carrier module product numbers are NM-1W and NM-2W. The NM-2V is supported in the following platforms: VG200, 2600, 2600XM, 2650XM, 2691, 3620, 3640, 3660, 3725, 3745. Specific IOS software versions are required, to see which IOS is needed click here . Condition: Pre-owned in good condition Warranty: 1 Year We carry a full line of accessories for Cisco equipment. If you do not see what you need in our store please contact us .

The Cisco Catalyst 6500 Series Wireless LAN Services Module (WLSM) part of the Catalyst 6500 Series of multilayer switches and a key component of the Cisco Structured Wireless-Aware Network (SWAN) framework is the industry's only enterprise-class wireless and wireline switching system enabling secure easily managed unified networking deployments for enterprises midsize businesses universities and service providers. Network administrators can now provide campus-wide fast secure roaming services to wireless users without sacrificing security implementing campus-spanning VLANs or modifying client software or hardware. The Catalyst 6500 Series WLSM delivers the industry's fastest secure Layer 3 mobility system with access point handoff times as low as 50 ms based upon the selected deployment scenario and the IEEE 802.1X authentication type.

The Catalyst 6000 Family supports a number of features designed to protect customer investments. Both the Catalyst 6000 and 6500 Series support the same line-card modules supervisors and power supplies enabling common sparing and cost-effective performance upgrades. Interface flexibility is supported on all Gigabit Ethernet ports such that interface requirement changes do not require a completely new module but can be satisfied by a simple Gigabit Interface Converter (GBIC) change. And since the Catalyst 6000 Family leverages the industry-leading software and management infrastructure of the Catalyst family customers can apply their existing knowledge of Cisco IOS command-line interface (CLI) CWSI and CRM tools without the need to learn a new CLI or management system.Modular chassis within both Catalyst 6000 and 6500 Series are offering slot densities of 6- and 9-slot systems. Catalyst 6006 6009 6506 and 6509 support a wide range of configuration and price/performance options. Both switches series support the same suite of supervisors interface line cards and common equipment easing sparing requirements and protecting investments with upward performance migration.

The Catalyst 6000 Family supports a number of features designed to protect customer investments. Both the Catalyst 6000 and 6500 Series support the same line-card modules supervisors and power supplies enabling common sparing and cost-effective performance upgrades. Interface flexibility is supported on all Gigabit Ethernet ports such that interface requirement changes do not require a completely new module but can be satisfied by a simple Gigabit Interface Converter (GBIC) change. And since the Catalyst 6000 Family leverages the industry-leading software and management infrastructure of the Catalyst family customers can apply their existing knowledge of Cisco IOS command-line interface (CLI) CWSI and CRM tools without the need to learn a new CLI or management system.Modular chassis within both Catalyst 6000 and 6500 Series are offering slot densities of 6- and 9-slot systems. Catalyst 6006 6009 6506 and 6509 support a wide range of configuration and price/performance options. Both switches series support the same suite of supervisors interface line cards and common equipment easing sparing requirements and protecting investments with upward performance migration.

Cisco FlexWAN Module for the Cisco 7600 and Cisco Catalyst 6500 Series The FlexWAN module for the Cisco 7600 Series Router and Cisco Catalyst 6500 Series Switch enables high- performance, intelligent LAN, WAN, and metropolitan- area network (MAN) service scalability for both enterprises and service providers. The FlexWAN module supports a variety of clear-channel and Channelized WAN interfaces, including T1/E1, T3/E3, High-Speed Serial Interface (HSSI), T3/E3 ATM, OC-3 ATM, and OC-3 packet over SONET (POS) with the ability to directly interface with high-speed SONET equipment for metropolitan- area networking. The FlexWAN module accepts up to two WAN port adapters commonly used with the Cisco 7600 series routers, providing an easy migration path for existing WAN and MAN networks. The innovative architecture is designed to deliver flexible media and enable distributed intelligent network services for next-generation applications. Data Link Protocol- ATM, HDLC, Frame Relay, SONET/SDH, PPP Status Indicators- Test mode, temperature, Boot State Features- PoS (Packet over SONET) Expansion Slots Total- Supports 2 Port Adapter Modules Compatible Slots- 1 x Expansion Slot Condition : Pre-owned in good condition. Warranty : 1 Year We carry a full line of accessories for Cisco equipment. If you do not see what you need in our store please contact us .

Cisco FlexWAN Module for the Cisco 7600 and Cisco Catalyst 6500 Series The FlexWAN module for the Cisco 7600 Series Router and Cisco Catalyst 6500 Series Switch enables high- performance, intelligent LAN, WAN, and metropolitan- area network (MAN) service scalability for both enterprises and service providers. The FlexWAN module supports a variety of clear-channel and Channelized WAN interfaces, including T1/E1, T3/E3, High-Speed Serial Interface (HSSI), T3/E3 ATM, OC-3 ATM, and OC-3 packet over SONET (POS) with the ability to directly interface with high-speed SONET equipment for metropolitan- area networking. The FlexWAN module accepts up to two WAN port adapters commonly used with the Cisco 7600 series routers, providing an easy migration path for existing WAN and MAN networks. The innovative architecture is designed to deliver flexible media and enable distributed intelligent network services for next-generation applications. Data Link Protocol- ATM, HDLC, Frame Relay, SONET/SDH, PPP Status Indicators- Test mode, temperature, Boot State Features- PoS (Packet over SONET) Expansion Slots Total- Supports 2 Port Adapter Modules Compatible Slots- 1 x Expansion Slot Condition : New in opened original packaging Warranty : 1 Year We carry a full line of accessories for Cisco equipment. If you do not see what you need in our store please contact us .

CAT 4500 48 PORT 10/100/1000 MODULE